Fick hem disken idag. Men det går inte så bra
. Misstänker att hdd-kontrollern i min laptop inte gillar ssd diskar. Får problem i terminalen samt att installationen kraschade när jag skulle skapa partitioner. Så jag flyttade över ssd:n till min stationära och uppgraderade firmware:en. Monterade sen tillbaka i laptopen. Nu gick det iaf att slutföra installationen och datorn funkar väl men den är inte speciellt snabb. Känns som en vanlig hårddisk i den fortfarande.
Utdrag ur dmesg
[ 0.599234] ata3: SATA max UDMA/133 abar m1024@0xfe9ffc00 port 0xfe9ffe00 irq 22
[ 0.920046] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.931796] ata3.00: ATA-8: OCZ-VERTEX3, 2.22, max UDMA/133
[ 0.931799] ata3.00: 175836528 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.941969] ata3.00: configured for UDMA/133
[ 144.688982] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen
[ 144.688988] ata3: irq_stat 0x00400000, PHY RDY changed
[ 144.688993] ata3: SError: { RecovComm Persist PHYRdyChg 10B8B }
[ 144.689002] ata3: hard resetting link
[ 145.412095] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 145.433835] ata3.00: configured for UDMA/133
[ 145.434265] ata3: EH complete
[ 193.665764] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen
[ 193.665774] ata3: irq_stat 0x00400000, PHY RDY changed
[ 193.665783] ata3: SError: { RecovComm Persist PHYRdyChg 10B8B }
[ 193.665795] ata3: hard resetting link
[ 194.388088] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 194.410173] ata3.00: configured for UDMA/133
[ 194.410609] ata3: EH complete
[ 293.747432] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen
[ 293.747439] ata3: irq_stat 0x00400000, PHY RDY changed
[ 293.747444] ata3: SError: { RecovComm Persist PHYRdyChg 10B8B }
[ 293.747452] ata3: hard resetting link
[ 294.468153] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 294.490188] ata3.00: configured for UDMA/133
[ 294.490593] ata3: EH complete
[ 653.538349] ata3: limiting SATA link speed to 1.5 Gbps
[ 653.538361] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen
[ 653.538369] ata3: irq_stat 0x00400000, PHY RDY changed
[ 653.538377] ata3: SError: { RecovComm Persist PHYRdyChg 10B8B }
[ 653.538389] ata3: hard resetting link
[ 654.260126] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 654.282233] ata3.00: configured for UDMA/133
[ 654.282664] ata3: EH complete
[ 680.878723] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
[ 680.878730] ata3: irq_stat 0x00400000, PHY RDY changed
[ 680.878735] ata3: SError: { Persist PHYRdyChg 10B8B }
[ 680.878742] ata3: hard resetting link
[ 681.600095] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 681.621857] ata3.00: configured for UDMA/133
[ 681.622291] ata3: EH complete
[ 743.343037] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
[ 743.343047] ata3: irq_stat 0x00400000, PHY RDY changed
[ 743.343055] ata3: SError: { Persist PHYRdyChg 10B8B }
[ 743.343066] ata3: hard resetting link
[ 744.064073] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 744.085705] ata3.00: configured for UDMA/133
[ 744.086143] ata3: EH complete
[ 748.430403] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
[ 748.430413] ata3: irq_stat 0x00400000, PHY RDY changed
[ 748.430422] ata3: SError: { Persist PHYRdyChg 10B8B }
[ 748.430433] ata3: hard resetting link
[ 749.152093] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 749.173933] ata3.00: configured for UDMA/133
[ 749.174374] ata3: EH complete
[ 1147.236789] ata3.00: limiting speed to UDMA/100:PIO4
[ 1147.236800] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
[ 1147.236808] ata3: irq_stat 0x00400000, PHY RDY changed
[ 1147.236817] ata3: SError: { Persist PHYRdyChg 10B8B }
[ 1147.236828] ata3: hard resetting link
[ 1147.960093] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1147.982052] ata3.00: configured for UDMA/100
[ 1147.982486] ata3: EH complete
[ 1166.919298] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
[ 1166.919309] ata3: irq_stat 0x00400000, PHY RDY changed
[ 1166.919318] ata3: SError: { Persist PHYRdyChg 10B8B }
[ 1166.919329] ata3: hard resetting link
[ 1167.640052] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1167.662016] ata3.00: configured for UDMA/100
[ 1167.662449] ata3: EH complete
[ 1269.499928] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
[ 1269.499938] ata3: irq_stat 0x00400000, PHY RDY changed
[ 1269.499946] ata3: SError: { Persist PHYRdyChg 10B8B }
[ 1269.499958] ata3: hard resetting link
[ 1270.220105] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1270.241747] ata3.00: configured for UDMA/100
[ 1270.242179] ata3: EH complete
[ 1272.575197] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
[ 1272.575203] ata3: irq_stat 0x00400000, PHY RDY changed
[ 1272.575208] ata3: SError: { Persist PHYRdyChg 10B8B }
[ 1272.575216] ata3: hard resetting link
[ 1273.296138] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1273.318233] ata3.00: configured for UDMA/100
[ 1273.318726] ata3: EH complete
[ 1308.479456] ata3.00: limiting speed to UDMA/33:PIO4
[ 1308.479468] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
[ 1308.479475] ata3: irq_stat 0x00400000, PHY RDY changed
[ 1308.479484] ata3: SError: { Persist PHYRdyChg 10B8B }
[ 1308.479495] ata3: hard resetting link
[ 1309.200088] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1309.221792] ata3.00: configured for UDMA/33
[ 1309.222214] ata3: EH complete
[ 1347.714271] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
[ 1347.714276] ata3: irq_stat 0x00400000, PHY RDY changed
[ 1347.714282] ata3: SError: { Persist PHYRdyChg 10B8B }
[ 1347.714289] ata3: hard resetting link
[ 1348.436091] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1348.458113] ata3.00: configured for UDMA/33
[ 1348.458550] ata3: EH complete
[ 1426.865719] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
[ 1426.865725] ata3: irq_stat 0x00400000, PHY RDY changed
[ 1426.865730] ata3: SError: { Persist PHYRdyChg 10B8B }
[ 1426.865737] ata3: hard resetting link
[ 1427.588090] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1427.609842] ata3.00: configured for UDMA/33
[ 1427.610276] ata3: EH complete
[ 1508.291712] ata3: exception Emask 0x10 SAct 0x0 SErr 0x90200 action 0xe frozen
[ 1508.291723] ata3: irq_stat 0x00400000, PHY RDY changed
[ 1508.291733] ata3: SError: { Persist PHYRdyChg 10B8B }
[ 1508.291744] ata3: hard resetting link
[ 1509.012098] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 1509.033952] ata3.00: configured for UDMA/33
[ 1509.034389] ata3: EH complete
Utdrag ifrån smartctl
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-30-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: SandForce Driven SSDs
Device Model: OCZ-VERTEX3
Serial Number: OCZ-0LX1GX93AAG43VCZ
LU WWN Device Id: 5 e83a97 e1c497071
Firmware Version: 2.22
User Capacity: 90 028 302 336 bytes [90,0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ACS-2 revision 3
Local Time is: Tue Sep 11 20:34:14 2012 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 48) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x0021) SCT Status supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 107 107 050 Pre-fail Always - 0/15334164
5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0
9 Power_On_Hours_and_Msec 0x0032 094 094 000 Old_age Always - 1h+37m+47.470s
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 7
171 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 11
177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 0
181 Program_Fail_Count 0x0032 000 000 000 Old_age Always - 0
182 Erase_Fail_Count 0x0032 000 000 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 030 030 000 Old_age Always - 30 (Min/Max 30/30)
195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/15334164
196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0
201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/15334164
204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/15334164
230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100
231 SSD_Life_Left 0x0013 100 100 010 Pre-fail Always - 0
233 SandForce_Internal 0x0000 000 000 000 Old_age Offline - 5
234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 16
241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 16
242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 8
SMART Error Log not supported
SMART Self-test Log not supported
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Nu blev man besviken. Att få support ifrån Fujitsu Siemens på en 3 år gammal laptop lär man väl bara glömma. Jag är dock inte ensam om felet i dmesg dom flesta har haft trasig ssd då eller så har dom inte löst problemet. Efter lite googlande.
Linjär visning
