BSOD problem relaterat till fel överklockning?
Hej Sweclockers! Ändå sedan jag för två veckor sedan böt från DDR2 till DDR3 minnen har jag haft ett flertal BSOD problem. Nedan visas systeminfo.
Moderkort:Gigabyte GA-EP35-DS3Rhttp://www.gigabyte.com/products/product-page.aspx?pid=2740#ov
Minnen: Corsair 4GB (2x2048MB) 1333MHz XMS3-10600 http://bit.ly/hDfRtD
CPU: E4500 http://intel.ly/99ddey
Robust Graphics Booster___________ [Auto]
CPU Clock Ratio ____________ [9]
CPU Host Clock Control_ [Enabled]
CPU Host Frequency (MHz)__________ [333]
PCI Express Frequency (Mhz)_______ [100]
C.I.A. 2__________________________ [Disabled]
System Memory Multiplier (SPD)____ [4.0~]
Memory Frequency (MHz)_________0 1333
DRAM Timing Selectable_______ SPD __ [Manual]
Performance Enhance = [Standard]
CAS Latency Time________________ 9
Dram RAS# to CAS# Delay_________ 9
Dram RAS# Precharge Delay_______ 9
Precharge Delay (tRAS)__________ 24
ACT to ACT Delay (tRRD)_________ AUTO
Rank Write to READ Delay________ AUTO
Write to Precharge Delay_________ AUTO
Refresh to ACT Delay______________ AUTO
Read to Precharge Delay__________ AUTO
Static tRead Value_______________ AUTO
Static tRead Phase Adjust________ AUTO
System Voltage Control__________[Manual]
DDR2/DDR3 OverVoltage Control__ [Standard]
PCI-E OverVoltage Control_______ [Standard]
FSB OverVoltage Control________ [Standard]
(G)MCH OverVoltage Control_____ [Standard]
Någon som har någon aning om vad som kan vara felet?
Memtest86+ är kört och jag får en hel del fel.