Antec Kühler 920 och egen kylpasta?

arctic silver anses väll vara en av de bästa? oavsett är det väldigt lite temperaturskillnad med olika typer av kylpasta, skilljer några enstaka grad på sin höjd villket oftast är inom felmarginalen.

Så ingen fara om man tycker att den är "lite för varm" i början...?

Är inte inbränningsperioden en myt? Arctic silver säger själva att det är så, men jag såg något test på olika kylpastor och då testade de även inbränningsperioden. Visade sig att det blev bättre cirka 1 timme inbränning men sedan blev det stabilt sämre.

Due to the unique carrier fluid used and the shapes and sizes of the thermally
conductive particles in Arctic Silver's thermal compounds it will take multiple
thermal cycles to achieve maximum particle to particle thermal conduction and
for the heatsink to metal cap interface to reach maximum conductivity. (This
period will be longer in a system without a fan on the heatsink.) On systems
measuring actual internal core temperatures via the CPU's internal diode, the
measured temperature will often drop slightly to significantly over this "break-in"
period. This break-in will occur during the normal use of the computer as long as
the computer is turned off from time to time and the interface is allowed to cool.

Break-In Period by Thermal Compound:
Arctic Silver 5:
Break-in period: 200 hours (Break-in period will occur during normal use.)
Temps will drop several degrees over the break-in period measured with a thermal
diode in the hottest part of the CPU core.

Céramique:
Break-in period: 25 hours (Break-in period will occur during normal use.)
Temps will drop several degrees over the break-in period measured with a thermal
diode in the hottest part of the CPU core.

Arctic Alumina:
Break-in period: 36 hours (Break-in period will occur during normal use.)
Temps will drop several degrees over the break-in period measured with a thermal
diode in the hottest part of the CPU core.

Matrix:
Break-in period: 300 hours (Break-in period will occur during normal use.)
Temps will drop several degrees over the break-in period measured with a thermal
diode in the hottest part of the CPU core.