Intel Core i7-6700K, får blue screens trots jag har återställt bios efter OC

Permalänk

Intel Core i7-6700K, får blue screens trots jag har återställt bios efter OC

tjenare jag följde nån överclocknings guide som ledde till massa bluescreens, efter att jag har återställt bios till default så får jag fortfarande blue screens när jag gör olika saker på datorn. vad är felet? har jag pajat nån komponent?

§3.1/rubrik förtydligad /screamin-daemon, moderator
Permalänk
Inaktiv

Kan du länka till guiden så ser vi vad du gjort.

Permalänk
Permalänk
Hedersmedlem

Jag har svårt att tro att du tar sönder något genom att följa en av Linus guider, han är en av de största i detta området. Vad exakt gjorde du för inställningar?

Permalänk

@Andreaz1: gjorde som han gjorde:P kan fan inget om överclockning men bygga o instalera datorer kan jag.

Permalänk
Avstängd

Ladda ner WhoCrashed -> http://www.resplendence.com/downloads

Ladda sedan upp resultatet här.

Visa signatur

[I7 9700k] [Asus rog strix z390-f gaming] [2x8GB DDR4 3200MHz CL14 Flare X] [Msi rtx 2070 super gaming x trio] [Corsair RM850X 850W v2] [Samsung 970 EVO Plus 500GB
] [Noctua nh-d14] [Asus Xonar Essence STX] [fractal design define s] [Windows 10 pro x64]

Permalänk
Medlem

Låter som att något kan ha blivit korrupt i windows, antingen en drivare eller en win komponent. Det kan hända om man får bsod på precis fel (rätt?) tillfälle och har du haft en "massa"bsod's så är det hög sannolikhet. sfc /scannow är ett ställe att börja på om det visar sig vara en win komponent.

Visa signatur

| nVidia RTX3090FE | R9 5950x | MSI x570 Unify | Ballistix sport 3000c15 32GB DR@3800c16 | Custom Loop EKWB | 9TB nvme, 3TB sata SSD | RM1000x | Creative X4 | Lian Li o11 Dynamic | Alienware aw3821dw | >Zen2 på 3-400 mobo< | >x570 VRM< | :::AMD Zen Minnesguide:::|:::AMD Zen & Zen+ Överklockningsguide:::

Permalänk

jag har även installerat om datorn så att allt är fresh

Permalänk
Medlem

Dra ut batteriet som sitter på moderkortet i ca 5 min och stoppa sedan tillbaka det. Se om det hjälper!

Visa signatur

12c/24t 4.0GHz (Zen2) • 2x16GiB 3200MHz C14 • RTX 2080 FE 1965MHz 7000MHz • X570 I PW • Ghost S1 MKII

Permalänk
Skrivet av Icte:

Dra ut batteriet som sitter på moderkortet i ca 5 min och stoppa sedan tillbaka det. Se om det hjälper!

har gjort det nu och ska se vad som händer, min zowie za12 slutade o fungera dock:P

Permalänk
Skrivet av robalm:

Ladda ner WhoCrashed -> http://www.resplendence.com/downloads

Ladda sedan upp resultatet här.

Crash Dump Analysis
--------------------------------------------------------------------------------

Crash dump directory: C:\Windows\Minidump

Crash dumps are enabled on your computer.

On Thu 2016-09-08 22:54:37 GMT your computer crashed
crash dump file: C:\Windows\Minidump\090916-4578-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14A0D0)
Bugcheck code: 0xA (0x5699, 0xD, 0x0, 0xFFFFF8029A4283D1)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

On Thu 2016-09-08 22:54:37 GMT your computer crashed
crash dump file: C:\Windows\memory.dmp
This was probably caused by the following module: hal.dll (hal!HalPerformEndOfInterrupt+0xC6)
Bugcheck code: 0xA (0x5699, 0xD, 0x0, 0xFFFFF8029A4283D1)
Error: IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: This indicates that Microsoft Windows or a kernel-mode driver accessed paged memory at DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system that cannot be identified at this time.

On Thu 2016-09-08 20:28:55 GMT your computer crashed
crash dump file: C:\Windows\Minidump\090816-4593-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14A0D0)
Bugcheck code: 0x133 (0x0, 0x501, 0x500, 0x0)
Error: DPC_WATCHDOG_VIOLATION
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem. This problem might also be caused because of overheating (thermal issue).
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

On Thu 2016-09-08 17:12:39 GMT your computer crashed
crash dump file: C:\Windows\Minidump\090816-4750-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14A0D0)
Bugcheck code: 0x139 (0x3, 0xFFFF97804313B7D0, 0xFFFF97804313B728, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.

--------------------------------------------------------------------------------
Conclusion
--------------------------------------------------------------------------------

4 crash dumps have been found and analyzed. No offending third party drivers have been found. Connsider using WhoCrashed Professional which offers more detailed analysis using symbol resolution. Also configuring your system to produce a full memory dump may help you.

Read the topic general suggestions for troubleshooting system crashes for more information.

Note that it's not always possible to state with certainty whether a reported driver is responsible for crashing your system or that the root cause is in another module. Nonetheless it's suggested you look for updates for the products that these drivers belong to and regularly visit Windows update or enable automatic updates for Windows. In case a piece of malfunctioning hardware is causing trouble, a search with Google on the bug check errors together with the model name and brand of your computer may help you investigate this further.

Permalänk
Medlem
Skrivet av omenation:

har gjort det nu och ska se vad som händer, min zowie za12 slutade o fungera dock:P

Jag hoppas att du drog ur batteriet när datorn var avstängd?

Visa signatur

12c/24t 4.0GHz (Zen2) • 2x16GiB 3200MHz C14 • RTX 2080 FE 1965MHz 7000MHz • X570 I PW • Ghost S1 MKII

Permalänk
Avstängd

Kör Memtest86 i några timmar.

Visa signatur

[I7 9700k] [Asus rog strix z390-f gaming] [2x8GB DDR4 3200MHz CL14 Flare X] [Msi rtx 2070 super gaming x trio] [Corsair RM850X 850W v2] [Samsung 970 EVO Plus 500GB
] [Noctua nh-d14] [Asus Xonar Essence STX] [fractal design define s] [Windows 10 pro x64]

Permalänk

Eftersom du fått felmedelande på Hal.dll vilket jag har för mig är en del av AMD/ATI´s Drivrutiner eller mjukvara (var iaf förr när ATI inte var upköpta av AMD) möjligt att de fortfarande använder den så misstänker jag starkt att grafikdrivaren är boven i dramat.

testa någon äldre om du har nyaste har du någon gammlt härke kör in senaste.

http://support.amd.com/en-us/download

Visa signatur

ASUS B550-f-Gaming, R9 5800X3D, HyperX 3200Mhz cl16 128Gb ram, rtx 3070ti.
[Lista] De bästa gratisprogrammen för Windows
[Diskussion] De bästa gratisprogrammen för Windows

Permalänk

tror jag har löst problemet. har haft igång den i 14 timmar nu och ingen blue screen än.

Permalänk
Avstängd

Och,vet du vad felet var?

Visa signatur

Chassi.Corsair Obsidian 750 D.Moderkort Asus Maximus XI Hero Processor Intel I7 8700K Med kylare Fractal design Celsius S36.Grafikkort MSI Gaming X trio 2080.SSD.1 Samsung 850 Pro 256 GB.SSD.2 Samsung 840 Evo 500 GB till spel.Nätagg Evga 850 G2.Minne 16 gb corsair vengeance 3200 mhtz.Skärm. Asus PG278QR.
2×596 gb.Mekaniska hårddiskar.

Permalänk
Skrivet av Mange43:

Och,vet du vad felet var?

http://imgur.com/A0iEBK1

tog AI overclock tuner på XMP och CPU core ratio på sync all cores, vet inte om det är så man ska "fixa" problemet, men det fungerar iaf.

Permalänk
Medlem

Kan det vara så att det löste sig när du ställde in minnena att köras via sin XMP-profil kanske?

Visa signatur

Main
MOBO: Gigabyte B550M DS3H, CPU: AMD Ryzen 5 5600, RAM: 2x16B @ 3600MHz, GPU: RADEON RX5700 Flashat till XT, SSD: WD BLACK SN750 SE 1TB nVME, 2x1TB Sata SSD Chassi, : Fractal Design Node 804, PSU: Corsair RM1000e, Skärm: Philips 27M1N3500LS.

Permalänk
Skrivet av BM-Mods:

Kan det vara så att det löste sig när du ställde in minnena att köras via sin XMP-profil kanske?

tror det.