Forum Mjukvara Linux och övriga operativsystem Tråd Inlägg

Dubbla skärmar - Ubuntu

1
Skriv svar
Permalänk
Medlem
●

Dubbla skärmar - Ubuntu

Jag ska hålla ett föredrag imorgon i skolan och ska visa en presentation gjord i OpenOffice2.0.

Jag behöver därför kunna koppla in en extra skärm (projektor) till min laptop för att hålla presentationen. Jag har ett Mobility Radeon 9700 i den, och senaste drivrutinerna från ATI korrekt installerade.

Vad ska jag skriva i min xorg.conf för att få den andra skärmen att fungera? Den andra skärmen ska ha upplösningen 800*600.

Om någon kunde modifiera min xorg.conf så att den fungerar med 2 skärmar vore det kanon. Skärmen ska vara klonad.

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
	Identifier     "Default Layout"
	Screen      0  "aticonfig Screen 0" 0 0
	InputDevice    "Generic Keyboard"
	InputDevice    "Configured Mouse"
	InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"

        # paths to defoma fonts
	FontPath     "/usr/share/X11/fonts/misc"
	FontPath     "/usr/share/X11/fonts/cyrillic"
	FontPath     "/usr/share/X11/fonts/100dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/75dpi/:unscaled"
	FontPath     "/usr/share/X11/fonts/Type1"
	FontPath     "/usr/share/X11/fonts/CID"
	FontPath     "/usr/share/X11/fonts/100dpi"
	FontPath     "/usr/share/X11/fonts/75dpi"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
	FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
	Load  "GLcore"
	Load  "bitmap"
	Load  "ddc"
	Load  "dri"
	Load  "extmod"
	Load  "freetype"
	Load  "glx"
	Load  "int10"
	Load  "type1"
	Load  "vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "CoreKeyboard"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc105"
	Option	    "XkbLayout" "se"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
	Option	    "CorePointer"
	Option	    "Device" "/dev/input/mice"
	Option	    "Protocol" "ImPS/2"
	Option	    "Emulate3Buttons" "true"
	Option	    "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
	Identifier  "Synaptics Touchpad"
	Driver      "synaptics"
	Option	    "SendCoreEvents" "true"
	Option	    "Device" "/dev/psaux"
	Option	    "Protocol" "auto-dev"
	Option	    "HorizScrollDelta" "0"
EndSection

Section "Monitor"
	Identifier   "Generic Monitor"
	HorizSync    28.0 - 50.0
	VertRefresh  43.0 - 75.0
	ModeLine     "1280x800@60" 83.9 1280 1312 1624 1656 800 816 824 841
	Option	    "DPMS"
EndSection

Section "Monitor"
	Identifier   "aticonfig Monitor 0"
EndSection

Section "Device"
	Identifier  "ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
	Driver      "ati"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "ATI Graphics Adapter 0"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Default Screen"
	Device     "ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)"
	Monitor    "Generic Monitor"
	DefaultDepth     24
	SubSection "Display"
		Depth     1
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     4
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     8
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     15
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     16
		Modes    "1280x800"
	EndSubSection
	SubSection "Display"
		Depth     24
		Modes    "1280x800"
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig Screen 0"
	Device     "ATI Graphics Adapter 0"
	Monitor    "aticonfig Monitor 0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "DRI"
	Mode         0666
EndSection
Visa signatur

SWECLOCKERS
AMD 5800X, Gigabyte GeForce RTX 3080 AORUS MASTER, G.SKill Trident Z Neo RGB 32GB 3600MHz, Gigabyte X570 AORUS MASTER, Noctua NH-D15, Corsair HX1000 V2, Fractal Design Define 7 TG
Lenovo Legion 5 Pro - 16" | Ryzen 7 5800H | 16GB | RTX 3070 | 165Hz | QHD

Redigera
Citera flera Citera
Permalänk
Medlem
●

Går det inte utan?
Jag körde laptop med ubuntu + projektor utan problem i skolan utan att behöva ändra någonting.

Visa signatur

"Knowledge amplification. What he learns, we all learn. What he knows, we all benefit from."

Redigera
Citera flera Citera
Permalänk
Medlem
●

Jag försökte koppla in en extra vanlig skärm som klarar av 1024x768, men den reagerar inte på att jag kopplar in den.

Visa signatur

SWECLOCKERS
AMD 5800X, Gigabyte GeForce RTX 3080 AORUS MASTER, G.SKill Trident Z Neo RGB 32GB 3600MHz, Gigabyte X570 AORUS MASTER, Noctua NH-D15, Corsair HX1000 V2, Fractal Design Define 7 TG
Lenovo Legion 5 Pro - 16" | Ryzen 7 5800H | 16GB | RTX 3070 | 165Hz | QHD

Redigera
Citera flera Citera
Permalänk
Medlem
●

Jag skulle också verkligen uppskatta hjälp här. Jag har kollat runt på ubuntuforums, men inget där verkar funka. Jag tänkte använda s-videoutgången på ett gforce 2. Jättetacksam om någon kan förklara!

Redigera
Citera flera Citera
Permalänk
Medlem
●
Citat:

Ursprungligen inskrivet av AtlasPatlas
Jag skulle också verkligen uppskatta hjälp här. Jag har kollat runt på ubuntuforums, men inget där verkar funka. Jag tänkte använda s-videoutgången på ett gforce 2. Jättetacksam om någon kan förklara!

Prova detta:

http://linux.bytesex.org/xawtv/
http://www.exploits.org/v4l/

Redigera
Citera flera Citera
Permalänk
Medlem
●
Citat:

Ursprungligen inskrivet av Soulfly
Prova detta:

http://linux.bytesex.org/xawtv/
http://www.exploits.org/v4l/

Tackar, men jag tror du missuppfattade. Jag vill använda mig av en utgång från grafikkortet, inte en ingång. Den sortens utgång jag syftar på är den som inte är vga eller component, jag tror den heter s-video men jag kan mycket väl ha fel.

Redigera
Citera flera Citera
Permalänk
Medlem
●

Ändra
Driver "ati"
till
Driver "fglrx"

AtlasPatlas: Med nvidia är det lätt att få igång TV ut google xorg+twinview

Visa signatur

Hur man installerar program i *nix | There is no Swedish conspiracy

these days you can't use the Web at 2400 baud because the ads are 24KB - Bill Joy

Redigera
Citera flera Citera
Permalänk
Medlem
●
Citat:

Ursprungligen inskrivet av Lunke
Ändra
Driver "ati"
till
Driver "fglrx"

AtlasPatlas: Med nvidia är det lätt att få igång TV ut google xorg+twinview

Det är det säkert, om man vet vad man pysslar med. Jag har nu försökt följa tre olika guider till hur man ska göra, men får det helt enkelt inte att funka. Nu har den iaf hittat tv:n, men jag får ingen bild på den. Min xorg.conf ser ut så här:

Section "Module"
	Load	"GLcore"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"dri"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"se"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
	Driver		"nvidia"
	BusID		"PCI:1:0:0"
	Option	"TwinView"	"yes"
	Option	"MetaModes"	"1280x1024,1280x1024;1024x768,1024x768;800x600,800x600" 
	Option	"ConnectedMonitor"	"CRT-0, TV-0"
EndSection

Section "Monitor"
	Identifier	"DELL 1901FP"
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
	Monitor		"DELL 1901FP"
	DefaultDepth	24
	SubSection "Display"
		Depth		1
		Modes		"1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		4
		Modes		"1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		8
		Modes		"1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		15
		Modes		"1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		16
		Modes		"1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

och min xorg.0.log så här:

(II) NVIDIA X Driver  1.0-7667  Fri Jun 17 07:03:12 PDT 2005
(II) NVIDIA Unified Driver for all NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Chipset NVIDIA GPU found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xdfe00000 - 0xdfefffff (0x100000) MX[B]
	[6] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]
	[7] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[8] -1	0	0xdfaf0000 - 0xdfafffff (0x10000) MX[B](B)
	[9] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[10] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
	[11] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[12] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[13] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[14] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[15] -1	0	0x0000ec00 - 0x0000ec3f (0x40) IX[B]
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xdfe00000 - 0xdfefffff (0x100000) MX[B]
	[6] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]
	[7] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[8] -1	0	0xdfaf0000 - 0xdfafffff (0x10000) MX[B](B)
	[9] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[10] -1	0	0xde000000 - 0xdeffffff (0x1000000) MX[B](B)
	[11] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[12] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[13] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[14] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[15] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[16] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[17] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[18] -1	0	0x0000ec00 - 0x0000ec3f (0x40) IX[B]
	[19] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[20] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "ConnectedMonitor" "CRT-0, TV-0"
(**) NVIDIA(0): Option "TwinView" "yes"
(**) NVIDIA(0): Option "MetaModes" "1280x1024,1280x1024;1024x768,1024x768;800x600,800x600"
(**) NVIDIA(0): ConnectedMonitor string: "CRT-0, TV-0"
(**) NVIDIA(0): TwinView enabled
(--) NVIDIA(0): Linear framebuffer at 0xD0000000
(--) NVIDIA(0): MMIO registers at 0xDE000000
(II) NVIDIA(0): NVIDIA GPU detected as: GeForce2 MX/MX 400
(--) NVIDIA(0): VideoBIOS: 03.11.00.18.00
(--) NVIDIA(0): Interlaced video modes are not supported on this GPU
(II) NVIDIA(0): Detected AGP rate: 2X
(--) NVIDIA(0): VideoRAM: 32768 kBytes
(II) NVIDIA(0): Using ConnectedMonitor string "CRT-0, TV-0"
(--) NVIDIA(0): CRT-0: maximum pixel clock: 350 MHz
(--) NVIDIA(0): Detected TV Encoder: Chrontel 7007
(--) NVIDIA(0): TV-0: maximum pixel clock: 650 MHz
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/X11R6/lib/modules/libddc.a
(WW) NVIDIA(0): No SecondMonitorHorizSync given; using default range
(WW) NVIDIA(0): No SecondMonitorVertRefresh given, using default range
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) NVIDIA(0): Primary V_BIOS segment is: 0xc000
(II) NVIDIA(0): DELL 1901FP: Using default hsync range of 30.00-80.00 kHz
(II) NVIDIA(0): DELL 1901FP: Using default vrefresh range of 56.00-76.00 Hz
(II) NVIDIA(0): Clock range:  12.00 to 350.00 MHz
...här följer massa rader med olika upplösningar...
För att sedan se ut så här:
(**) NVIDIA(0): Validated modes for display device TV-0:
(**) NVIDIA(0):      Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(**) NVIDIA(0):      Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
(WW) NVIDIA(0): Unable to find mode "1280x1024" for display device 1 in
(WW) NVIDIA(0):      MetaMode "1280x1024,1280x1024"
(WW) NVIDIA(0): Unable to find mode "1024x768" for display device 1 in
(WW) NVIDIA(0):      MetaMode "1024x768,1024x768"
(WW) NVIDIA(0): Unable to find mode "800x600" for display device 1 in MetaMode
(WW) NVIDIA(0):      "800x600,800x600"
(II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
(--) NVIDIA(0): Display dimensions: (380, 310) mm
(--) NVIDIA(0): DPI set to (85, 83)
Senast redigerat
Redigera
Citera flera Citera
Permalänk
Medlem
●

Jag fick det faktiskt att fungera! Fråga mig inte hur jag gjorde, ändrade på i stort sett allt känns det som

Visa signatur

SWECLOCKERS
AMD 5800X, Gigabyte GeForce RTX 3080 AORUS MASTER, G.SKill Trident Z Neo RGB 32GB 3600MHz, Gigabyte X570 AORUS MASTER, Noctua NH-D15, Corsair HX1000 V2, Fractal Design Define 7 TG
Lenovo Legion 5 Pro - 16" | Ryzen 7 5800H | 16GB | RTX 3070 | 165Hz | QHD

Redigera
Citera flera Citera
Permalänk
Medlem
●
Section "Module"
	Load	"GLcore"
	Load	"i2c"
	Load	"bitmap"
	Load	"ddc"
	Load	"extmod"
	Load	"freetype"
	Load	"glx"
	Load	"int10"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"se"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"		"/dev/input/mice"
	Option		"Protocol"		"ImPS/2"
	Option		"Emulate3Buttons"	"true"
	Option		"ZAxisMapping"		"4 5"
EndSection

Section "Device"
	Identifier	"NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
	Driver		"nvidia"
	BusID		"PCI:1:0:0"
        Screen      0
	Option	"TwinView"	"yes"
	Option	"MetaModes"	"1280x1024,1024x768;1024x768,1024x768;800x600,800x600" 
	Option	"ConnectedMonitor"	"CRT-0, TV-0"
        Option  "TwinViewOrientation"      "RightOf"
        #Option     "SecondMonitorHorizSync"   "DINAVÄRDENHÄR"
        #Option     "SecondMonitorVertRefresh" "DINAVÄRDENHÄR"
EndSection

Section "Monitor"
	Identifier	"DELL 1901FP"
        #HorizSync   DINAVÄRDENHÄR
        #VertRefresh DINAVÄRDENHÄR
	Option		"DPMS"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
	Monitor		"DELL 1901FP"
	DefaultDepth	24
	SubSection "Display"
		Depth		24
		Modes		"1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480"
	EndSubSection
EndSection

Section "ServerLayout"
	Identifier	"Default Layout"
	Screen		"Default Screen"
	InputDevice	"Generic Keyboard"
	InputDevice	"Configured Mouse"
EndSection

Testa den configen, funkar det inte ta bort #-teckenet i början på de rader som DINAVÄRDENHÄR står i, se till att skriva in korrekta värden istället för DINAVÄRDENHÄR också.
Kommentera bort allt om dri, klarar din TV verkligen 1280x1024?

Visa signatur

Hur man installerar program i *nix | There is no Swedish conspiracy

these days you can't use the Web at 2400 baud because the ads are 24KB - Bill Joy

Redigera
Citera flera Citera
1
Skriv svar
Senaste nyheterna
Hårdvara
Mjukvara
Övrigt
Nytt i forumet
Datorkomponenter
System
Ljud, bild och kommunikation
Spel och mjukvara