Lite info hur man går tillväga.
uninstall mouseware
download this and run the program http://www.razerzone.com/drivers/drvr2012.exe
go to C:\Program Files\Karna\Razer\Driver and open razer.inf
find
[Karna.Mfg]
%Karna.DeviceDesc0% = razerusb, HID\VID_05E3&PID_000B
%Karna.DeviceDesc0% = razerusb, HID\VID_05E3&PID_FE00
and add this line if you have a mouseman dual optical
[Karna.Mfg]
%Karna.DeviceDesc0% = razerusb, HID\VID_05E3&PID_000B
%Karna.DeviceDesc0% = razerusb, HID\VID_05E3&PID_FE00
%Karna.DeviceDesc0% = razerusb, HID\VID_046D&PID_C012
if you have an mx 500 then you should add the line
[Karna.Mfg]
%Karna.DeviceDesc0% = razerusb, HID\VID_05E3&PID_000B
%Karna.DeviceDesc0% = razerusb, HID\VID_05E3&PID_FE00
%Karna.DeviceDesc0% = razerusb, HID\VID_046D&PID_C025
save the changes
go to your mouse in the hardware profile
click "update the driver"
check to "update from a list" and click next
then click "have disk"
browse to C:\Program Files\Karna\Razer\Driver
you then should be able to select "Karna USB Mouse" from the driver list if everything worked correctly.
Install this driver, and reboot. You should be able to use the karna software to assign the thumb button to a key.
-------------------------------------------------------------------
This Fix is intended for all users of a Razer Boomslang who have problems using it under Windows XP (Lost Settings when rebooted, not being able to program buttons).
If you install the common drivers from the provided cd (version 2.0.12, also downloadable from http://www.razerzone.com)
-First install the drivers, reboot when asked
If correctly installed, the razer application asks something about registration, press later, then apply or ok.
Double checking if the mouse is correctly installed
- Go to the Control Panel
- Click on "Mouse"
- Click on the "Hardware"-tab
- Check if it says "Karna USB mouse"
If so, continue, if not, install the drivers again
Customizing your mouse
- Open Control Panel
- Click on Razer Boomslang
- Adjust your settings (sensitivity, program buttons, etc.)
- Press apply, then ok
Continue to the next step.
Making the settings permanent (this involves editing your registry, so be carefull please & do not hold me responsible for mistakes you make after this point of warning!)
1. Startup Regedit (start>run>type: regedit >press enter)
2. Go to HKEY_CURRENT_USER\Software\Karna\Razer
3. You'll see all kinds of settings (I will call these "items") like DoubleClickSpeed etc.
4. Go to HKEY_USERS\.DEFAULT\Software\Karna\Razer aswell
5. You'll see the same items as seen by step 2 along with a few others, but with other values
6. Adjust the values (by double clicking on an item like DoubleClickSpeed) in such a way that the new values match the values seen in the items in step 2
Adjust the values for the follwing items
- ButtonAssignedX (where X = 1 through 5)
- DoubleClickSpeed
- RazerSpeedX
- RazerSpeedY
- ScrollWheelSpeed
7. Reboot, the settings are permanent from this point on
