Trädvy Permalänk
Medlem
Plats
Stockholm
Registrerad
Sep 2002

Dubbla skärmar - Ubuntu

Jag ska hålla ett föredrag imorgon i skolan och ska visa en presentation gjord i OpenOffice2.0.

Jag behöver därför kunna koppla in en extra skärm (projektor) till min laptop för att hålla presentationen. Jag har ett Mobility Radeon 9700 i den, och senaste drivrutinerna från ATI korrekt installerade.

Vad ska jag skriva i min xorg.conf för att få den andra skärmen att fungera? Den andra skärmen ska ha upplösningen 800*600.

Om någon kunde modifiera min xorg.conf så att den fungerar med 2 skärmar vore det kanon. Skärmen ska vara klonad.

# /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg Section "ServerLayout" Identifier "Default Layout" Screen 0 "aticonfig Screen 0" 0 0 InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "Synaptics Touchpad" EndSection Section "Files" # paths to defoma fonts FontPath "/usr/share/X11/fonts/misc" FontPath "/usr/share/X11/fonts/cyrillic" FontPath "/usr/share/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/X11/fonts/Type1" FontPath "/usr/share/X11/fonts/CID" FontPath "/usr/share/X11/fonts/100dpi" FontPath "/usr/share/X11/fonts/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID" EndSection Section "Module" Load "GLcore" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "type1" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "se" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Synaptics Touchpad" Driver "synaptics" Option "SendCoreEvents" "true" Option "Device" "/dev/psaux" Option "Protocol" "auto-dev" Option "HorizScrollDelta" "0" EndSection Section "Monitor" Identifier "Generic Monitor" HorizSync 28.0 - 50.0 VertRefresh 43.0 - 75.0 ModeLine "1280x800@60" 83.9 1280 1312 1624 1656 800 816 824 841 Option "DPMS" EndSection Section "Monitor" Identifier "aticonfig Monitor 0" EndSection Section "Device" Identifier "ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)" Driver "ati" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "ATI Graphics Adapter 0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Radeon Mobility 9600/9700 M10/M11 (RV350 NP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x800" EndSubSection SubSection "Display" Depth 4 Modes "1280x800" EndSubSection SubSection "Display" Depth 8 Modes "1280x800" EndSubSection SubSection "Display" Depth 15 Modes "1280x800" EndSubSection SubSection "Display" Depth 16 Modes "1280x800" EndSubSection SubSection "Display" Depth 24 Modes "1280x800" EndSubSection EndSection Section "Screen" Identifier "aticonfig Screen 0" Device "ATI Graphics Adapter 0" Monitor "aticonfig Monitor 0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "DRI" Mode 0666 EndSection

SWECLOCKERS.COM
Stationär: i7 4790K @ 4,6 GHz, GTX 1080 8GB, 16GB DDR3, Corsair Hydro H100i, Corsair AX760, Bitfenix Prodigy mITX
Laptop: Apple Macbook Pro Retina 15" Late 2013

Trädvy Permalänk
Medlem
Plats
Lund
Registrerad
Mar 2002

Går det inte utan?
Jag körde laptop med ubuntu + projektor utan problem i skolan utan att behöva ändra någonting.

"Knowledge amplification. What he learns, we all learn. What he knows, we all benefit from."

Trädvy Permalänk
Medlem
Plats
Stockholm
Registrerad
Sep 2002

Jag försökte koppla in en extra vanlig skärm som klarar av 1024x768, men den reagerar inte på att jag kopplar in den.

SWECLOCKERS.COM
Stationär: i7 4790K @ 4,6 GHz, GTX 1080 8GB, 16GB DDR3, Corsair Hydro H100i, Corsair AX760, Bitfenix Prodigy mITX
Laptop: Apple Macbook Pro Retina 15" Late 2013

Trädvy Permalänk
Medlem
Registrerad
Maj 2004

Jag skulle också verkligen uppskatta hjälp här. Jag har kollat runt på ubuntuforums, men inget där verkar funka. Jag tänkte använda s-videoutgången på ett gforce 2. Jättetacksam om någon kan förklara!

Trädvy Permalänk
Medlem
Registrerad
Mar 2004
Citat:

Ursprungligen inskrivet av AtlasPatlas
Jag skulle också verkligen uppskatta hjälp här. Jag har kollat runt på ubuntuforums, men inget där verkar funka. Jag tänkte använda s-videoutgången på ett gforce 2. Jättetacksam om någon kan förklara!

Prova detta:

http://linux.bytesex.org/xawtv/
http://www.exploits.org/v4l/

Trädvy Permalänk
Medlem
Registrerad
Maj 2004
Citat:

Ursprungligen inskrivet av Soulfly
Prova detta:

http://linux.bytesex.org/xawtv/
http://www.exploits.org/v4l/

Tackar, men jag tror du missuppfattade. Jag vill använda mig av en utgång från grafikkortet, inte en ingång. Den sortens utgång jag syftar på är den som inte är vga eller component, jag tror den heter s-video men jag kan mycket väl ha fel.

Trädvy Permalänk
Medlem
Plats
/dev/null
Registrerad
Feb 2004

Ändra
Driver "ati"
till
Driver "fglrx"

AtlasPatlas: Med nvidia är det lätt att få igång TV ut google xorg+twinview

Hur man installerar program i *nix | There is no Swedish conspiracy

these days you can't use the Web at 2400 baud because the ads are 24KB - Bill Joy

Trädvy Permalänk
Medlem
Registrerad
Maj 2004
Citat:

Ursprungligen inskrivet av Lunke
Ändra
Driver "ati"
till
Driver "fglrx"

AtlasPatlas: Med nvidia är det lätt att få igång TV ut google xorg+twinview

Det är det säkert, om man vet vad man pysslar med. Jag har nu försökt följa tre olika guider till hur man ska göra, men får det helt enkelt inte att funka. Nu har den iaf hittat tv:n, men jag får ingen bild på den. Min xorg.conf ser ut så här:

Section "Module" Load "GLcore" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "type1" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "se" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Device" Identifier "NVIDIA Corporation NV11 [GeForce2 MX/MX 400]" Driver "nvidia" BusID "PCI:1:0:0" Option "TwinView" "yes" Option "MetaModes" "1280x1024,1280x1024;1024x768,1024x768;800x600,800x600" Option "ConnectedMonitor" "CRT-0, TV-0" EndSection Section "Monitor" Identifier "DELL 1901FP" Option "DPMS" EndSection Section "Screen" Identifier "Default Screen" Device "NVIDIA Corporation NV11 [GeForce2 MX/MX 400]" Monitor "DELL 1901FP" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection

och min xorg.0.log så här:

(II) NVIDIA X Driver 1.0-7667 Fri Jun 17 07:03:12 PDT 2005 (II) NVIDIA Unified Driver for all NVIDIA GPUs (II) Primary Device is: PCI 01:00:0 (--) Chipset NVIDIA GPU found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdfe00000 - 0xdfefffff (0x100000) MX[B] [6] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B] [7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [8] -1 0 0xdfaf0000 - 0xdfafffff (0x10000) MX[B](B) [9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [10] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B) [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [13] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [14] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B] [15] -1 0 0x0000ec00 - 0x0000ec3f (0x40) IX[B] (II) resource ranges after probing: [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0 0xdfe00000 - 0xdfefffff (0x100000) MX[B] [6] -1 0 0xdffff000 - 0xdfffffff (0x1000) MX[B] [7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O [8] -1 0 0xdfaf0000 - 0xdfafffff (0x10000) MX[B](B) [9] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B) [10] -1 0 0xde000000 - 0xdeffffff (0x1000000) MX[B](B) [11] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] [12] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [13] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [15] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] [16] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B] [17] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B] [18] -1 0 0x0000ec00 - 0x0000ec3f (0x40) IX[B] [19] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] [20] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) NVIDIA(0): Option "ConnectedMonitor" "CRT-0, TV-0" (**) NVIDIA(0): Option "TwinView" "yes" (**) NVIDIA(0): Option "MetaModes" "1280x1024,1280x1024;1024x768,1024x768;800x600,800x600" (**) NVIDIA(0): ConnectedMonitor string: "CRT-0, TV-0" (**) NVIDIA(0): TwinView enabled (--) NVIDIA(0): Linear framebuffer at 0xD0000000 (--) NVIDIA(0): MMIO registers at 0xDE000000 (II) NVIDIA(0): NVIDIA GPU detected as: GeForce2 MX/MX 400 (--) NVIDIA(0): VideoBIOS: 03.11.00.18.00 (--) NVIDIA(0): Interlaced video modes are not supported on this GPU (II) NVIDIA(0): Detected AGP rate: 2X (--) NVIDIA(0): VideoRAM: 32768 kBytes (II) NVIDIA(0): Using ConnectedMonitor string "CRT-0, TV-0" (--) NVIDIA(0): CRT-0: maximum pixel clock: 350 MHz (--) NVIDIA(0): Detected TV Encoder: Chrontel 7007 (--) NVIDIA(0): TV-0: maximum pixel clock: 650 MHz (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a (WW) NVIDIA(0): No SecondMonitorHorizSync given; using default range (WW) NVIDIA(0): No SecondMonitorVertRefresh given, using default range (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) NVIDIA(0): Primary V_BIOS segment is: 0xc000 (II) NVIDIA(0): DELL 1901FP: Using default hsync range of 30.00-80.00 kHz (II) NVIDIA(0): DELL 1901FP: Using default vrefresh range of 56.00-76.00 Hz (II) NVIDIA(0): Clock range: 12.00 to 350.00 MHz ...här följer massa rader med olika upplösningar... För att sedan se ut så här: (**) NVIDIA(0): Validated modes for display device TV-0: (**) NVIDIA(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz (**) NVIDIA(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) (WW) NVIDIA(0): Unable to find mode "1280x1024" for display device 1 in (WW) NVIDIA(0): MetaMode "1280x1024,1280x1024" (WW) NVIDIA(0): Unable to find mode "1024x768" for display device 1 in (WW) NVIDIA(0): MetaMode "1024x768,1024x768" (WW) NVIDIA(0): Unable to find mode "800x600" for display device 1 in MetaMode (WW) NVIDIA(0): "800x600,800x600" (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024 (--) NVIDIA(0): Display dimensions: (380, 310) mm (--) NVIDIA(0): DPI set to (85, 83)

Trädvy Permalänk
Medlem
Plats
Stockholm
Registrerad
Sep 2002

Jag fick det faktiskt att fungera! Fråga mig inte hur jag gjorde, ändrade på i stort sett allt känns det som

SWECLOCKERS.COM
Stationär: i7 4790K @ 4,6 GHz, GTX 1080 8GB, 16GB DDR3, Corsair Hydro H100i, Corsair AX760, Bitfenix Prodigy mITX
Laptop: Apple Macbook Pro Retina 15" Late 2013

Trädvy Permalänk
Medlem
Plats
/dev/null
Registrerad
Feb 2004

Section "Module" Load "GLcore" Load "i2c" Load "bitmap" Load "ddc" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "type1" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "se" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Device" Identifier "NVIDIA Corporation NV11 [GeForce2 MX/MX 400]" Driver "nvidia" BusID "PCI:1:0:0" Screen 0 Option "TwinView" "yes" Option "MetaModes" "1280x1024,1024x768;1024x768,1024x768;800x600,800x600" Option "ConnectedMonitor" "CRT-0, TV-0" Option "TwinViewOrientation" "RightOf" #Option "SecondMonitorHorizSync" "DINAVÄRDENHÄR" #Option "SecondMonitorVertRefresh" "DINAVÄRDENHÄR" EndSection Section "Monitor" Identifier "DELL 1901FP" #HorizSync DINAVÄRDENHÄR #VertRefresh DINAVÄRDENHÄR Option "DPMS" EndSection Section "Screen" Identifier "Default Screen" Device "NVIDIA Corporation NV11 [GeForce2 MX/MX 400]" Monitor "DELL 1901FP" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "720x400" "640x480" EndSubSection EndSection Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection

Testa den configen, funkar det inte ta bort #-teckenet i början på de rader som DINAVÄRDENHÄR står i, se till att skriva in korrekta värden istället för DINAVÄRDENHÄR också.
Kommentera bort allt om dri, klarar din TV verkligen 1280x1024?

Hur man installerar program i *nix | There is no Swedish conspiracy

these days you can't use the Web at 2400 baud because the ads are 24KB - Bill Joy