Byta språk i en Hp Pavillion dv6000

Trädvy Permalänk
Medlem
Plats
Kiruna
Registrerad
Nov 2009

Byta språk i en Hp Pavillion dv6000

När jag startade min dator för första gången kunde jag välja mellan olika språk på Win Xp, jag valde engelska.

Nu ska jag ge bort burken till en person som inte är så bevandrade i det engelska språket och skulle vilja byta tillbaka till svenska.

Är det möjligt?

Det sitter en 100Gb hårdisk i burken med en C och en D partiion. I D partitionen finns en recoverydel.

När jag kollar med diskmgmt.msc så visar den en C och en D partition, dessutom visar den en till partition utan enhetsbeteckning.

Har försökt göra D partitionen aktiv och köra en ny recovery, funkar inte. La in en Ubuntuskiva och kollade vad som finns i recoverydelen men hittar inget som verkar hänga ihop med språket.

Nån som har några tips att komma med?

EDIT: Gick in med Ubuntuskivan i hårddisken och hittade denna fil. Nån som kan tyda den?

MBR.INI

; English HP 12/02/02
; V1.9e Modified System Lock Message - added Boot Switches
; v1.9g UseSmallMBR=1 / STR_START=""
; v2.0d
; line feed before "Press any key..." etc.
; ShowRecoveryPart=1
; SwapPart=0 04/04/02
; v2.2b1 Replaced HP by tag %BRANDNAME% in STR_NO_PASSWORD (section [BootLoader])

[PEImage]
Verify=1
LeaveFreeSpace=300
Absolute_Size=1
ImageSize=8000

[BootLoader]
RecoveryPartition=1
RecoveryPartitionOnStartOfDisk=0
; Boot loader timeout for "\nOperating system found.\nPress 'R' to display System Recovery options.\n"
TimeOut=0
; answer key for "nNo operating system installed or partition corrupted.\nPress 'R' to perform a full System Recovery.\n"
ANSWER_FullRestore="R"
; answer key for "\nOperating system found.\nPress 'R' to display System Recovery options. "
ANSWER_SHOW_MENU="R"
; answer key for "Press 'F' to format the hard drive and perform a full System Recovery."
ANSWER_DESTROY_HD="F"
; answer key for "Press 'R' for standard System Recovery options."
ANSWER_BOOT_PE="R"
; answer key for "Press 'Q' to Quit."
ANSWER_BOOT_XP="Q"
; answer key for "\n\nPlease confirm with 'Y' to format drive and install a new operating system.\n"
ANSWER_YES="Y"
; Error strings
STR_CD_READ_ERR="\nCD/DVD read error!"
STR_HD_WRITE_ERR="\nHard drive write error!\n"
STR_ERROR="\nNon-System disk or disk error\n"
STR_PRESSAKEY="\nPress any key to continue.\n"
STR_HD_TOO_SMALL="\nERROR: The hard drive is too small for the recovery!\n"
; Menu Strings
STR_HD_ERROR="\nNo hard drive found.\nPC Recovery cannot be continued!\n"
STR_CD_ERROR="\nError! Unable to detect CD/DVD drive.\nPC Recovery cannot be continued!\n"
STR_PT_ERROR="\nNo operating system installed or partition corrupted.\nPress 'R' to perform a full PC Recovery.\n"
STR_ASK_RESTORE="\nPress 'R' to display PC Recovery options. "
STR_MENU_OPTIONS="\nPress 'R' for standard PC Recovery options.\n\nPress 'F' to format the hard drive and reinstall the original factory settings.\n All data will be lost!\n\nPress 'Q' to Quit this menu.\n"
STR_CONFIRM_FORMAT="\n\nPress 'Y' to format the hard drive and reinstall original factory settings.\nPress 'Esc' to exit this menu."
STR_NORMAL_BOOT="\n\nBooting PC..."
STR_RECOVERY_BOOT="\n\nStarting recovery...\n"
STR_COPY_TO_HD="\nPreparing recovery partition - please wait.\n"
STR_CURRENT_SIZE="\nThe current recovery partition size in MB is ";
STR_GET_IMAGE_SIZE="\nPlease enter the new size "
; Startup stuff
STR_WRONG_BLOCK="Error! Could not verify CD-ROM image.\n"
STR_SEARCH_CDDRIVE="Detected CD-ROM as drive "
STR_SEARCH_IMAGE="Detected boot image on LBA "

; Password stuff
STR_NO_PASSWORD="\nThese PC Recovery discs do NOT support this PC model. "
LockSystem=1
SystemPassword="Hewlett-Packard"
LockSystem2=0
; Max 4 chars!
SystemPassword2="****"
;5.0.42
PasswordsOn_HD=0
Use_Harddisk_Lock=0

OEM_Option123=1
OEM_Option007=5B03
OEM_Option008=8906
;IF AskCreateRecoveryPartition=1 THEN the boot loader will ask STR_ASK_CREATE_RP
AskCreateRecoveryPartition=0
;IF asked for Yes or NO, this is the NO letter
ANSWER_NO="N"
;...
STR_ASK_CREATE_RP="\n\n\n\nDo you want to create a recovery partition on the hard drive?\n\n * Press 'Y' to create the recovery partition used for standard PC\n Recovery.\n\n * Press 'N' to bypass creating the recovery partition and always recover\n directly from PC Recovery discs."

[MasterBootRecord]
UseSmallMBR=1
CountMode=3
RecoveryInUserPart=0
SwapPart=0
TimeOut=0
STR_BS_ERROR=
STR_ERROR="\nMBR Error\n"
STR_PRESSAKEY=
STR_START=
QuietCountDown=0
AutoHideRecovery=0
ShowRecoveryPart=1
ScanCode=133

Framtiden är aldrig säker (detta gäller även datorer...)

Trädvy Permalänk
Medlem
Plats
Kiruna
Registrerad
Nov 2009

Fy fan va lama ni är. Ska jag lära er att byta bakgrundsbild i windows?

Framtiden är aldrig säker (detta gäller även datorer...)

Trädvy Permalänk
Medlem
Plats
Borlänge
Registrerad
Maj 2009

Borde finnas i
Control Panel > Region & Language
Finns där i Windows 7 iallafall, borde väl finnas något liknande i XP, du kan alltid testa Lycka till!

Windows 8 x64 | i7 2600k Stock @ 1.05V | P8P67-M Pro | Vengeance LP 1600MHz | Samsung 840 Pro + Crucial C300 64GB | R9 290 @ 1122MHz | Newton R2 650W | Define Mini | Y500 Laptop (650M SLI)