Trädvy Permalänk
Medlem
Plats
Partille
Registrerad
Dec 2009

Formatera Acer TravelMate 6291

Jag har en Acer TravelMate 6291 med Vista hemma som jag hade tänkt att formatera.
Jag tror inte jag fick med någon Windows CD. Jag har en CD som heter Windows Anytime Upgrade men jag tror inte den är till någon hjälp.
Hur ska jag då formatera, vad behöver jag veta, om jag formaterar utan CD, får jag inget operativsystem då och hur funkar det med drivrutiner och så?

| R2 | Fractal 650w modulärt | Sandy i5 2500k | 560ti | Corsair 2x4GB | P-67 |

Trädvy Permalänk
Medlem
Plats
Halland
Registrerad
Mar 2008

Fick du inte ens med en Windows Recovery skiva? Den ställer tillbaka Windows till ursprungligt skick.

Om inte se efter om du har en till partition på hårddisken, där kan det finnas en backup av Vista.

Antec Performance P182 | Intel Core i7 920 | Gigabyte GeForce GTX 660Ti | Gigabyte GA-EX58-DS4 | Corsair XMS3 1333 MHz 6 GB | Samsung SpinPoint F3 | Corsair 650TX | Windows 7 x86-64 | QPAD MK-50

Trädvy Permalänk
Medlem
Plats
Partille
Registrerad
Dec 2009
Citat:

Ursprungligen inskrivet av marcusnns
Fick du inte ens med en Windows Recovery skiva? Den ställer tillbaka Windows till ursprungligt skick.

Om inte se efter om du har en till partition på hårddisken, där kan det finnas en backup av Vista.

Hur vet man om man har en till partition på hårddisken?
Jag är inte så bra på såna grejer.

| R2 | Fractal 650w modulärt | Sandy i5 2500k | 560ti | Corsair 2x4GB | P-67 |

Trädvy Permalänk
Medlem
Plats
Halland
Registrerad
Mar 2008

Jag är inte säker på att går att installera om helt utan att du bara kan ställa om Vista till ursprungligt skick.

Du behöver ett program som heter Acer eRecovery Management.
Fick du med detta? Annars kanske Acer har detta på sin hemsida.

DETTA STÅR I MANUALEN

Acer eRecovery Management is a tool to quickly backup and restore the system.
You can create and save a backup of the current system configuration to hard
disk, CD or DVD. You can also backup/restore the factory default image, and
reinstall applications and drivers.
Acer eRecovery Management consists of the following functions:
1 Create backup
2 Burn backup disc
3 Restore and recovery
This chapter will guide you through each process.
Note: This feature is only available on certain models. For systems
that do not have a built-in optical disc burner, plug in an external
optical disc burner before entering Acer eRecovery Management
for optical disc-related tasks.
When using Acer eRecovery Management, you may be prompted to enter the
Empowering Technology password to proceed. The Empowering Technology
password is set using the Empowering Technology toolbar or when first running
Acer eLock Management or Acer eRecovery Management.
Create backup
You can easily create full and fast (incremental) backup images of your system
configuration to hard disk from the main Acer eRecovery Management screen.
Note: Fast (incremental) Backup is only available after a Full
Backup is made.
1 Press <Alt> + <F10> or select Acer eRecovery Management from the
Empowering Technology toolbar to start Acer eRecovery Management.
2 In the Acer eRecovery Management window, select the type of backup you
want to create using Full or Fast.

3 Follow the instructions on screen to complete the process.
Burn backup disc
Using the Burn Disc page of Acer eRecovery Management, you can burn the
factory default image, a user backup image, the current system configuration,
or an application backup image to CD or DVD.
1 Press <Alt> + <F10> or select Acer eRecovery Management from the
Empowering Technology toolbar to start Acer eRecovery Management.
2 Switch to the Burn Disc page by selecting the Burn Disc button.
3 Select the type of backup (factory default, user, current system,
application) you would like to burn to disc. Choosing to burn a user backup
will burn your most recently created backup image to disc.
4 Follow the instructions on screen to complete the process.
Note: Create a factory default image when you want to burn a
bootable disc that contains your computer's entire operating
system as it was delivered to you from the factory. If you wish to
have a disc that will allow you to browse the contents and install
selected drivers and applications, create an application backup
image instead — this disc will not be bootable.
Restore and recovery
The restore and recovery features allow you to restore or recover the system
from a factory default image, from a user created image, or from previously
created CD and DVD backups. You can also reinstall applications and drivers for
your Acer system.

1 Press <Alt> + <F10> or select Acer eRecovery Management from the
Empowering Technology toolbar to start Acer eRecovery Management.
2 Switch to the restore and recovery page by selecting the Restore button.
3 Select the backup point you would like to restore from. You can also
choose to recover the system from a factory default image, recover from a
previously created CD/DVD or reinstall applications and drivers.
4 Follow the instructions on screen to complete the process.

Antec Performance P182 | Intel Core i7 920 | Gigabyte GeForce GTX 660Ti | Gigabyte GA-EX58-DS4 | Corsair XMS3 1333 MHz 6 GB | Samsung SpinPoint F3 | Corsair 650TX | Windows 7 x86-64 | QPAD MK-50

Trädvy Permalänk
Medlem
Plats
Partille
Registrerad
Dec 2009
Citat:

Ursprungligen inskrivet av marcusnns
Jag är inte säker på att går att installera om helt utan att du bara kan ställa om Vista till ursprungligt skick.

Du behöver ett program som heter Acer eRecovery Management.
Fick du med detta? Annars kanske Acer har detta på sin hemsida.

DETTA STÅR I MANUALEN

Acer eRecovery Management is a tool to quickly backup and restore the system.
You can create and save a backup of the current system configuration to hard
disk, CD or DVD. You can also backup/restore the factory default image, and
reinstall applications and drivers.
Acer eRecovery Management consists of the following functions:
1 Create backup
2 Burn backup disc
3 Restore and recovery
This chapter will guide you through each process.
Note: This feature is only available on certain models. For systems
that do not have a built-in optical disc burner, plug in an external
optical disc burner before entering Acer eRecovery Management
for optical disc-related tasks.
When using Acer eRecovery Management, you may be prompted to enter the
Empowering Technology password to proceed. The Empowering Technology
password is set using the Empowering Technology toolbar or when first running
Acer eLock Management or Acer eRecovery Management.
Create backup
You can easily create full and fast (incremental) backup images of your system
configuration to hard disk from the main Acer eRecovery Management screen.
Note: Fast (incremental) Backup is only available after a Full
Backup is made.
1 Press <Alt> + <F10> or select Acer eRecovery Management from the
Empowering Technology toolbar to start Acer eRecovery Management.
2 In the Acer eRecovery Management window, select the type of backup you
want to create using Full or Fast.

3 Follow the instructions on screen to complete the process.
Burn backup disc
Using the Burn Disc page of Acer eRecovery Management, you can burn the
factory default image, a user backup image, the current system configuration,
or an application backup image to CD or DVD.
1 Press <Alt> + <F10> or select Acer eRecovery Management from the
Empowering Technology toolbar to start Acer eRecovery Management.
2 Switch to the Burn Disc page by selecting the Burn Disc button.
3 Select the type of backup (factory default, user, current system,
application) you would like to burn to disc. Choosing to burn a user backup
will burn your most recently created backup image to disc.
4 Follow the instructions on screen to complete the process.
Note: Create a factory default image when you want to burn a
bootable disc that contains your computer's entire operating
system as it was delivered to you from the factory. If you wish to
have a disc that will allow you to browse the contents and install
selected drivers and applications, create an application backup
image instead — this disc will not be bootable.
Restore and recovery
The restore and recovery features allow you to restore or recover the system
from a factory default image, from a user created image, or from previously
created CD and DVD backups. You can also reinstall applications and drivers for
your Acer system.

1 Press <Alt> + <F10> or select Acer eRecovery Management from the
Empowering Technology toolbar to start Acer eRecovery Management.
2 Switch to the restore and recovery page by selecting the Restore button.
3 Select the backup point you would like to restore from. You can also
choose to recover the system from a factory default image, recover from a
previously created CD/DVD or reinstall applications and drivers.
4 Follow the instructions on screen to complete the process.

Okej, tack så mycket.

| R2 | Fractal 650w modulärt | Sandy i5 2500k | 560ti | Corsair 2x4GB | P-67 |