Permalänk
Medlem

Minnet vill inte klocka alls?

Köpte G.Skill minnen till min nya rigg efter att ha läst recensionen nedan. Datorn startar dock ej med timings på 8-8-8-24 eller 7-7-7-24, bara standard 9-9-9-24 går. Kör volt på auto. Missar jag något?

"This 8 GB set of G.Skill DDR3-1600 CL9 did kind of surprise me with the 1968 MHz ceiling at the stock rated timings of 9-9-9-24. Surprised because of the supposed difficulty in overclocking modules of this density. I just wasn't expecting this RAM to reach that level since the 2 GB Ripjaw sticks gave out at 1780 MHz with the same rated speed, timings and voltage. The XMP profile works just as expected, as does the RAM at its rated 1600 Mhz speed. You can also substantially tighten up the timings at the module's 1600MHz rated speed to 7-7-7-24, which of course is a nice bonus when you run this memory at 1600 MHz. Price wise, this set is an incredible value at the current pricing of $189 at Newegg for this 8GB set of memory from G.Skill. So, if you are in need of an 8 GB set of dual channel memory that still has some headroom for expansion in both timings and frequency, you may want to consider this G.Skill set. "

Permalänk

Vilka G.Skill minnen är det du har? Mina vill inte heller klocka alls.

Permalänk
Medlem
Skrivet av Dispersion:

Vilka G.Skill minnen är det du har? Mina vill inte heller klocka alls.

Dom här http://www.inet.se/artikel/5308804/g-skill-8gb-2x4096mb-cl9-1... .
Med tanke på vad som skrevs i reviewen så känns det konstigt.

Permalänk

Länk till reviewen hade också varit fint! Inte säkert att det är samma kit.

Permalänk
Medlem
Skrivet av Dispersion:

Länk till reviewen hade också varit fint! Inte säkert att det är samma kit.

Rätt säker på att det är samma.

http://www.overclockersclub.com/reviews/gskill_ddr3_1600_8gb/...

Permalänk
Avstängd

Öka volten lite? 1.65 volt ska inte vara farligt iallafall.