Hur vet jag om raid fungerar? Amilo M3458g

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-45-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:37:48 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffcffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ffde000-0x000000007fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fed13000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: FUJITSU SIEMENS Amilo M3438 Series/P71EN0, BIOS 1.10C 10/05/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7ffd0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[ 0.000000] [mem 0x34000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01b96000, 0x01b96fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35a66000-0x36d2afff]
[ 0.000000] ACPI: RSDP 000f8110 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7ffd0000 00003C (v01 A M I OEMRSDT 10000505 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ffd0200 000084 (v02 A M I OEMFACP 10000505 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ffd0430 004A43 (v01 UW____ F18_____ 00000001 INTL 02002026)
[ 0.000000] ACPI: FACS 7ffde000 000040
[ 0.000000] ACPI: APIC 7ffd0390 000054 (v01 A M I OEMAPIC 10000505 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ffd03f0 00003C (v01 A M I OEMMCFG 10000505 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ffde040 000046 (v01 A M I AMI_OEM 10000505 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ffd4e80 00003C (v01 A M I OEMMCFG 10000505 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7ffd4ec0 0003F6 (v01 AMI CPU1PM 00000001 INTL 02002026)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1155MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01b97000, 0x01b97fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x7ffcffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffcffff]
[ 0.000000] On node 0 totalpages: 524142
[ 0.000000] free_area_init_node: node 0, pgdat c199d700, node_mem_map f4a66020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2312 pages used for memmap
[ 0.000000] HighMem zone: 295890 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xfed12fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7be4000 s36160 r0 d21184 u57344
[ 0.000000] pcpu-alloc: s36160 r0 d21184 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522358
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-45-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4193912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007ffd0)
[ 0.000000] Memory: 2044020K/2096568K available (6547K kernel code, 641K rwdata, 2764K rodata, 876K init, 924K bss, 52548K reserved, 1183560K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc19bb000 - 0xc1a96000 ( 876 kB)
[ 0.000000] .data : 0xc1665134 - 0xc19ba580 (3413 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1665134 (6548 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1733.331 MHz processor
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3466.66 BogoMIPS (lpj=6933324)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004056] Security Framework initialized
[ 0.004088] AppArmor: AppArmor initialized
[ 0.004090] Yama: becoming mindful.
[ 0.004201] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004205] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.008408] Initializing cgroup subsys memory
[ 0.008423] Initializing cgroup subsys devices
[ 0.008428] Initializing cgroup subsys freezer
[ 0.008432] Initializing cgroup subsys blkio
[ 0.008436] Initializing cgroup subsys perf_event
[ 0.008440] Initializing cgroup subsys hugetlb
[ 0.008480] Disabled fast string operations
[ 0.008491] mce: CPU supports 5 MCE banks
[ 0.008504] CPU0: Thermal monitoring enabled (TM2)
[ 0.008520] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.008520] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
[ 0.008520] tlb_flushall_shift: 6
[ 0.022434] Freeing SMP alternatives memory: 32K (c1a96000 - c1a9e000)
[ 0.024442] ACPI: Core revision 20131115
[ 0.028685] ACPI: All ACPI Tables successfully acquired
[ 0.029096] ftrace: allocating 27841 entries in 55 pages
[ 0.040140] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040528] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.082297] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.73GHz (fam: 06, model: 0d, stepping: 08)
[ 0.084000] Performance Events: p6 PMU driver.
[ 0.084000] ... version: 0
[ 0.084000] ... bit width: 32
[ 0.084000] ... generic registers: 2
[ 0.084000] ... value mask: 00000000ffffffff
[ 0.084000] ... max period: 000000007fffffff
[ 0.084000] ... fixed-purpose events: 0
[ 0.084000] ... event mask: 0000000000000003
[ 0.084000] x86: Booted up 1 node, 1 CPUs
[ 0.084000] smpboot: Total of 1 processors activated (3466.66 BogoMIPS)
[ 0.084000] devtmpfs: initialized
[ 0.084298] EVM: security.selinux
[ 0.084300] EVM: security.SMACK64
[ 0.084302] EVM: security.ima
[ 0.084304] EVM: security.capability
[ 0.084356] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.084474] PM: Registering ACPI NVS region [mem 0x7ffde000-0x7fffffff] (139264 bytes)
[ 0.086316] pinctrl core: initialized pinctrl subsystem
[ 0.086422] regulator-dummy: no parameters
[ 0.086459] RTC time: 20:15:55, date: 02/19/15
[ 0.086518] NET: Registered protocol family 16
[ 0.086770] EISA bus registered
[ 0.086773] cpuidle: using governor ladder
[ 0.086775] cpuidle: using governor menu
[ 0.086893] ACPI: bus type PCI registered
[ 0.086897] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.086998] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.087002] PCI: not using MMCONFIG
[ 0.087120] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.087148] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[ 0.087150] PCI: Using configuration type 1 for base access
[ 0.088963] bio: create slab <bio-0> at 0
[ 0.089174] ACPI: Added _OSI(Module Device)
[ 0.089177] ACPI: Added _OSI(Processor Device)
[ 0.089180] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.089182] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.091629] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.096054] ACPI: Interpreter enabled
[ 0.096073] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.096079] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.096100] ACPI: (supports S0 S3 S4 S5)
[ 0.096102] ACPI: Using IOAPIC for interrupt routing
[ 0.100012] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.105003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.105006] PCI: Using MMCONFIG for extended config space
[ 0.105027] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.105191] ACPI: No dock devices found.
[ 0.197860] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.197869] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.197878] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.198029] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.198033] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.198037] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.198040] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.198044] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.198047] PCI: root bus 00: using default resources
[ 0.198279] PCI host bridge to bus 0000:00
[ 0.198285] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.198289] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.198292] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.198305] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.198440] pci 0000:00:01.0: [8086:2591] type 01 class 0x060400
[ 0.198488] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.198554] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.198637] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
[ 0.198656] pci 0000:00:1b.0: reg 0x10: [mem 0xfebf8000-0xfebfbfff 64bit]
[ 0.198727] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.198795] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.198847] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
[ 0.198920] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.198989] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.199049] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.199091] pci 0000:00:1d.0: reg 0x20: [io 0xe480-0xe49f]
[ 0.199210] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.199252] pci 0000:00:1d.1: reg 0x20: [io 0xe800-0xe81f]
[ 0.199367] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.199410] pci 0000:00:1d.2: reg 0x20: [io 0xe880-0xe89f]
[ 0.199527] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.199570] pci 0000:00:1d.3: reg 0x20: [io 0xec00-0xec1f]
[ 0.199693] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.199715] pci 0000:00:1d.7: reg 0x10: [mem 0xfebffc00-0xfebfffff]
[ 0.199800] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.199915] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.200027] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.200081] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.200165] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.200176] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.200182] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.200187] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f
[ 0.200290] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
[ 0.200305] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.200315] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.200326] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.200337] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.200348] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.200472] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.200526] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.200720] pci 0000:03:00.0: [10de:00c8] type 00 class 0x030000
[ 0.200733] pci 0000:03:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.200745] pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.200758] pci 0000:03:00.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.200773] pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
[ 0.200858] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.200867] pci 0000:00:01.0: PCI bridge to [bus 03]
[ 0.200873] pci 0000:00:01.0: bridge window [mem 0xfaa00000-0xfeafffff]
[ 0.200878] pci 0000:00:01.0: bridge window [mem 0xbfe00000-0xdfefffff pref]
[ 0.200957] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.200963] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.200969] pci 0000:00:1c.0: bridge window [mem 0xbfc00000-0xbfcfffff]
[ 0.200976] pci 0000:00:1c.0: bridge window [mem 0xbfd00000-0xbfdfffff 64bit pref]
[ 0.201090] pci 0000:01:03.0: [8086:4220] type 00 class 0x028000
[ 0.201111] pci 0000:01:03.0: reg 0x10: [mem 0xfa9fe000-0xfa9fefff]
[ 0.201193] pci 0000:01:03.0: PME# supported from D0 D3hot D3cold
[ 0.201275] pci 0000:01:04.0: [104c:8023] type 00 class 0x0c0010
[ 0.201296] pci 0000:01:04.0: reg 0x10: [mem 0xfa9ff000-0xfa9ff7ff]
[ 0.201308] pci 0000:01:04.0: reg 0x14: [mem 0xfa9f8000-0xfa9fbfff]
[ 0.201382] pci 0000:01:04.0: supports D1 D2
[ 0.201386] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot
[ 0.201464] pci 0000:01:05.0: [10ec:8169] type 00 class 0x020000
[ 0.201484] pci 0000:01:05.0: reg 0x10: [io 0xc800-0xc8ff]
[ 0.201496] pci 0000:01:05.0: reg 0x14: [mem 0xfa9ffc00-0xfa9ffcff]
[ 0.201542] pci 0000:01:05.0: reg 0x30: [mem 0xfa9c0000-0xfa9dffff pref]
[ 0.201572] pci 0000:01:05.0: supports D1 D2
[ 0.201576] pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.201610] pci 0000:01:05.0: System wakeup disabled by ACPI
[ 0.201669] pci 0000:01:07.0: [1106:3249] type 00 class 0x010400
[ 0.201689] pci 0000:01:07.0: reg 0x10: [io 0xdc00-0xdc0f]
[ 0.201701] pci 0000:01:07.0: reg 0x14: [io 0xd880-0xd88f]
[ 0.201713] pci 0000:01:07.0: reg 0x18: [io 0xd800-0xd80f]
[ 0.201725] pci 0000:01:07.0: reg 0x1c: [io 0xd480-0xd48f]
[ 0.201737] pci 0000:01:07.0: reg 0x20: [io 0xd400-0xd41f]
[ 0.201749] pci 0000:01:07.0: reg 0x24: [io 0xd000-0xd0ff]
[ 0.201875] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.201880] pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff]
[ 0.201886] pci 0000:00:1e.0: bridge window [mem 0xfa900000-0xfa9fffff]
[ 0.201893] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.201897] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.201914] pci_bus 0000:00: on NUMA node 0
[ 0.204297] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.204390] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.204480] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.204573] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.204663] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.204753] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.204844] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.208083] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.208251] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.208309] Found 1 acpi root devices
[ 0.208370] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.208512] vgaarb: setting as boot device: PCI:0000:03:00.0
[ 0.208516] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.208519] vgaarb: loaded
[ 0.208521] vgaarb: bridge control possible 0000:03:00.0
[ 0.208868] SCSI subsystem initialized
[ 0.208918] libata version 3.00 loaded.
[ 0.208960] ACPI: bus type USB registered
[ 0.208992] usbcore: registered new interface driver usbfs
[ 0.209007] usbcore: registered new interface driver hub
[ 0.209037] usbcore: registered new device driver usb
[ 0.209190] PCI: Using ACPI for IRQ routing
[ 0.209194] PCI: pci_cache_line_size set to 64 bytes
[ 0.209202] pci 0000:00:1e.0: address space collision: [io 0xc000-0xdfff] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
[ 0.209226] pci 0000:01:07.0: address space collision: [io 0xdc00-0xdc0f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
[ 0.209232] pci 0000:01:07.0: address space collision: [io 0xd880-0xd88f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
[ 0.209236] pci 0000:01:07.0: address space collision: [io 0xd800-0xd80f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
[ 0.209241] pci 0000:01:07.0: address space collision: [io 0xd480-0xd48f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
[ 0.209245] pci 0000:01:07.0: address space collision: [io 0xd400-0xd41f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
[ 0.209250] pci 0000:01:07.0: address space collision: [io 0xd000-0xd0ff] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
[ 0.209279] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.209286] e820: reserve RAM buffer [mem 0x7ffd0000-0x7fffffff]
[ 0.209424] NetLabel: Initializing
[ 0.209427] NetLabel: domain hash size = 128
[ 0.209429] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.209448] NetLabel: unlabeled traffic allowed by default
[ 0.209726] hpet clockevent registered
[ 0.209731] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.209737] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.209743] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.211813] Switched to clocksource hpet
[ 0.219254] AppArmor: AppArmor Filesystem Enabled
[ 0.219330] pnp: PnP ACPI init
[ 0.219364] ACPI: bus type PNP registered
[ 0.219499] system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.219507] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.219542] pnp 00:01: [dma 4]
[ 0.219575] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.219642] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.219752] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.219847] pnp 00:04: Plug and Play ACPI device, IDs SYN0802 SYN0800 PNP0f13 (active)
[ 0.219892] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.219938] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.220132] pnp 00:07: disabling [io 0x0010-0x001f] because it overlaps 0000:01:07.0 BAR 4 [io 0x0000-0x001f]
[ 0.220139] pnp 00:07: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220143] pnp 00:07: disabling [io 0x0022-0x003f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220147] pnp 00:07: disabling [io 0x0044-0x004d] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220151] pnp 00:07: disabling [io 0x0050-0x005f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220155] pnp 00:07: disabling [io 0x0063] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220160] pnp 00:07: disabling [io 0x0065] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220164] pnp 00:07: disabling [io 0x0067-0x006f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220168] pnp 00:07: disabling [io 0x0072-0x007f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220172] pnp 00:07: disabling [io 0x0080] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220176] pnp 00:07: disabling [io 0x0084-0x0086] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220180] pnp 00:07: disabling [io 0x0088] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220185] pnp 00:07: disabling [io 0x008c-0x008e] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220189] pnp 00:07: disabling [io 0x0090-0x009f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220193] pnp 00:07: disabling [io 0x00a2-0x00bf] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220197] pnp 00:07: disabling [io 0x00e0-0x00ef] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220241] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.220246] system 00:07: [io 0x0800-0x087f] could not be reserved
[ 0.220250] system 00:07: [io 0x0480-0x04bf] has been reserved
[ 0.220255] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.220259] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.220263] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.220268] system 00:07: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.220272] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.220383] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.220388] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.220392] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.220453] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.220458] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.226420] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.226425] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.226429] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.226434] system 00:0a: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.226439] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.226646] pnp: PnP ACPI: found 11 devices
[ 0.226649] ACPI: bus type PNP unregistered
[ 0.226653] PnPBIOS: Disabled by ACPI PNP
[ 0.263702] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.263712] pci 0000:00:1e.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.263716] pci 0000:00:01.0: PCI bridge to [bus 03]
[ 0.263723] pci 0000:00:01.0: bridge window [mem 0xfaa00000-0xfeafffff]
[ 0.263728] pci 0000:00:01.0: bridge window [mem 0xbfe00000-0xdfefffff pref]
[ 0.263734] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.263738] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.263744] pci 0000:00:1c.0: bridge window [mem 0xbfc00000-0xbfcfffff]
[ 0.263750] pci 0000:00:1c.0: bridge window [mem 0xbfd00000-0xbfdfffff 64bit pref]
[ 0.263760] pci 0000:01:07.0: BAR 5: assigned [io 0x1000-0x10ff]
[ 0.263767] pci 0000:01:07.0: BAR 4: assigned [io 0x1400-0x141f]
[ 0.263773] pci 0000:01:07.0: BAR 0: assigned [io 0x1420-0x142f]
[ 0.263780] pci 0000:01:07.0: BAR 1: assigned [io 0x1430-0x143f]
[ 0.263786] pci 0000:01:07.0: BAR 2: assigned [io 0x1440-0x144f]
[ 0.263792] pci 0000:01:07.0: BAR 3: assigned [io 0x1450-0x145f]
[ 0.263798] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.263802] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.263809] pci 0000:00:1e.0: bridge window [mem 0xfa900000-0xfa9fffff]
[ 0.263818] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.263822] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.263826] pci_bus 0000:03: resource 1 [mem 0xfaa00000-0xfeafffff]
[ 0.263829] pci_bus 0000:03: resource 2 [mem 0xbfe00000-0xdfefffff pref]
[ 0.263833] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.263837] pci_bus 0000:02: resource 1 [mem 0xbfc00000-0xbfcfffff]
[ 0.263840] pci_bus 0000:02: resource 2 [mem 0xbfd00000-0xbfdfffff 64bit pref]
[ 0.263844] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.263848] pci_bus 0000:01: resource 1 [mem 0xfa900000-0xfa9fffff]
[ 0.263851] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.263855] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
[ 0.263916] NET: Registered protocol family 2
[ 0.264253] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.264286] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.264342] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.264384] TCP: reno registered
[ 0.264388] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.264404] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.264503] NET: Registered protocol family 1
[ 0.292116] pci 0000:03:00.0: Video device with shadowed ROM
[ 0.292131] PCI: CLS 32 bytes, default 64
[ 0.292211] Trying to unpack rootfs image as initramfs...
[ 0.859216] Freeing initrd memory: 19220K (f5a66000 - f6d2b000)
[ 0.859536] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 0.859632] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.859635] Scanning for low memory corruption every 60 seconds
[ 0.860103] Initialise system trusted keyring
[ 0.860181] audit: initializing netlink socket (disabled)
[ 0.860203] type=2000 audit(1424376955.860:1): initialized
[ 0.893774] bounce pool size: 64 pages
[ 0.893793] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.896069] zbud: loaded
[ 0.896181] VFS: Disk quotas dquot_6.5.2
[ 0.896258] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.897013] fuse init (API version 7.22)
[ 0.897141] msgmni has been set to 1718
[ 0.897240] Key type big_key registered
[ 0.897586] Key type asymmetric registered
[ 0.897589] Asymmetric key parser 'x509' registered
[ 0.897645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.897681] io scheduler noop registered
[ 0.897684] io scheduler deadline registered (default)
[ 0.897730] io scheduler cfq registered
[ 0.898019] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.898080] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.898169] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.898271] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.898298] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.898366] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.898368] vesafb: scrolling: redraw
[ 0.898372] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.898480] vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 1216k, total 1216k
[ 0.914910] Console: switching to colour frame buffer device 80x30
[ 0.931217] fb0: VESA VGA frame buffer device
[ 0.931250] intel_idle: does not run on family 6 model 13
[ 0.931261] ipmi message handler version 39.2
[ 0.931621] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.933292] ACPI: AC Adapter [AC0] (off-line)
[ 0.933399] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.933422] ACPI: Lid Switch [LID]
[ 0.933481] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.933487] ACPI: Sleep Button [SLPB]
[ 0.933547] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.933552] ACPI: Power Button [PWRB]
[ 0.933614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.933618] ACPI: Power Button [PWRF]
[ 0.933704] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.933716] ACPI: acpi_idle registered with cpuidle
[ 0.974206] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.974209] ACPI: Thermal Zone [THRM] (32 C)
[ 0.974263] GHES: HEST is not enabled!
[ 0.974377] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.976432] Linux agpgart interface v0.103
[ 0.978877] brd: module loaded
[ 0.980157] loop: module loaded
[ 0.980337] ata_piix 0000:00:1f.1: version 2.13
[ 0.981982] isapnp: Scanning for PnP cards...
[ 1.030911] scsi0 : ata_piix
[ 1.031001] scsi1 : ata_piix
[ 1.031054] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.031057] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.031687] libphy: Fixed MDIO Bus: probed
[ 1.031861] tun: Universal TUN/TAP device driver, 1.6
[ 1.031863] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.031916] PPP generic driver version 2.4.2
[ 1.031982] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.031988] ehci-pci: EHCI PCI platform driver
[ 1.032123] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.032133] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.032150] ehci-pci 0000:00:1d.7: debug port 1
[ 1.036054] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.123299] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfebffc00
[ 1.166743] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.264812] ata1.00: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CW02, max UDMA/33
[ 1.308489] isapnp: No Plug & Play device found
[ 1.308583] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.308587] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.308590] usb usb1: Product: EHCI Host Controller
[ 1.308594] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[ 1.308597] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.308748] hub 1-0:1.0: USB hub found
[ 1.308760] hub 1-0:1.0: 8 ports detected
[ 1.309028] ehci-platform: EHCI generic platform driver
[ 1.309041] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.309044] ohci-pci: OHCI PCI platform driver
[ 1.309059] ohci-platform: OHCI generic platform driver
[ 1.309070] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.309168] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.309176] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.309201] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e480
[ 1.309263] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.309267] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.309270] usb usb2: Product: UHCI Host Controller
[ 1.309273] usb usb2: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[ 1.309277] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.309409] hub 2-0:1.0: USB hub found
[ 1.309421] hub 2-0:1.0: 2 ports detected
[ 1.309621] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.309629] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.309667] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[ 1.309727] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.309731] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.309734] usb usb3: Product: UHCI Host Controller
[ 1.309738] usb usb3: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[ 1.309741] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.309879] hub 3-0:1.0: USB hub found
[ 1.309889] hub 3-0:1.0: 2 ports detected
[ 1.310081] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.310092] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.310130] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 1.310191] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.310195] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.310198] usb usb4: Product: UHCI Host Controller
[ 1.310201] usb usb4: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[ 1.310204] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.310335] hub 4-0:1.0: USB hub found
[ 1.310346] hub 4-0:1.0: 2 ports detected
[ 1.310550] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.310557] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.310594] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 1.310654] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.310658] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.310661] usb usb5: Product: UHCI Host Controller
[ 1.310664] usb usb5: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[ 1.310668] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.310796] hub 5-0:1.0: USB hub found
[ 1.310806] hub 5-0:1.0: 2 ports detected
[ 1.311024] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.316225] i8042: Detected active multiplexing controller, rev 1.0
[ 1.317117] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.317122] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.317126] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.317129] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.317132] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.317220] mousedev: PS/2 mouse device common for all mice
[ 1.317576] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.317603] rtc_cmos 00:02: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.317722] device-mapper: uevent: version 1.0.3
[ 1.317814] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.317848] platform eisa.0: Probing EISA bus 0
[ 1.317856] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.317882] platform eisa.0: EISA: Detected 0 cards
[ 1.317891] cpufreq-nforce2: No nForce2 chipset.
[ 1.317895] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.318107] TCP: cubic registered
[ 1.318275] NET: Registered protocol family 10
[ 1.318587] NET: Registered protocol family 17
[ 1.318608] Key type dns_resolver registered
[ 1.318821] Using IPI No-Shortcut mode
[ 1.318929] Loading compiled-in X.509 certificates
[ 1.325010] Loaded X.509 cert 'Magrathea: Glacier signing key: 3689bf48af502cbafe71e5c25d6c55340b7f13ff'
[ 1.325029] registered taskstats version 1
[ 1.327989] Key type trusted registered
[ 1.330416] Key type encrypted registered
[ 1.334662] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.334673] ACPI: Battery Slot [BAT0] (battery present)
[ 1.334908] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.334913] IMA: No TPM chip found, activating TPM-bypass!
[ 1.335185] regulator-dummy: disabling
[ 1.335250] Magic number: 3:245:296
[ 1.335302] tty tty29: hash matches
[ 1.335366] rtc_cmos 00:02: setting system clock to 2015-02-19 20:15:56 UTC (1424376956)
[ 1.335647] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.335652] EDD information not available.
[ 1.335737] PM: Hibernation image not present or could not be loaded.
[ 1.335969] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.336303] ata1.00: configured for UDMA/33
[ 1.453597] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4082N CW02 PQ: 0 ANSI: 5
[ 1.562957] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.562965] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.563234] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.563479] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.564339] Freeing unused kernel memory: 876K (c19bb000 - c1a96000)
[ 1.564456] Write protecting the kernel text: 6552k
[ 1.564674] Write protecting the kernel read-only data: 2768k
[ 1.564678] NX-protecting the kernel data: 5736k
[ 1.600344] systemd-udevd[95]: starting version 204
[ 1.970446] sata_via 0000:01:07.0: version 2.6
[ 1.970671] sata_via 0000:01:07.0: routed to hard irq line 10
[ 1.985370] scsi2 : sata_via
[ 1.988047] scsi3 : sata_via
[ 1.990379] scsi4 : sata_via
[ 1.995473] ata3: SATA max UDMA/133 port i16@0x1420 bmdma 0x1400 irq 16
[ 1.995482] ata4: SATA max UDMA/133 port i16@0x1430 bmdma 0x1408 irq 16
[ 1.995488] ata5: PATA max UDMA/133 port i16@0x1440 bmdma 0x1410 irq 16
[ 2.068108] firewire_ohci 0000:01:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 2.068475] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.068661] r8169 0000:01:05.0 (unregistered net_device): not PCI Express
[ 2.069230] r8169 0000:01:05.0 eth0: RTL8169sb/8110sb at 0xf845ac00, 00:03:0d:36:de:c7, XID 10000000 IRQ 19
[ 2.069240] r8169 0000:01:05.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 2.316212] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.324689] ata3.00: ATA-7: ST96812AS, 3.03, max UDMA/133
[ 2.324698] ata3.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.332709] ata3.00: configured for UDMA/133
[ 2.332994] scsi 2:0:0:0: Direct-Access ATA ST96812AS 3.03 PQ: 0 ANSI: 5
[ 2.333465] sd 2:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.333613] sd 2:0:0:0: [sda] Write Protect is off
[ 2.333622] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.333689] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.334304] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.354217] sda: sda1 sda2 < sda5 >
[ 2.354989] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.568323] firewire_core 0000:01:04.0: created device fw0: GUID 00030d4971e33099, S400
[ 2.652153] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.660681] ata4.00: ATA-7: ST96812AS, 3.03, max UDMA/133
[ 2.660690] ata4.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.668682] ata4.00: configured for UDMA/133
[ 2.668921] scsi 3:0:0:0: Direct-Access ATA ST96812AS 3.03 PQ: 0 ANSI: 5
[ 2.669560] sd 3:0:0:0: [sdb] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.669711] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.669720] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.669785] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.670633] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.688397] sdb: sdb1 sdb2 < sdb5 >
[ 2.689369] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.720170] psmouse serio2: synaptics: Touchpad model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a/0x0, board id: 3655, fw id: 40930
[ 2.762071] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input14
[ 3.434662] random: nonblocking pool is initialized
[ 3.688308] bio: create slab <bio-1> at 1
[ 3.924226] bio: create slab <bio-2> at 2
[ 8.297826] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 22.141085] Adding 2097148k swap on /dev/mapper/xubuntu--vg-swap_1. Priority:-1 extents:1 across:2097148k FS
[ 22.179267] EXT4-fs (dm-4): re-mounted. Opts: errors=remount-ro
[ 22.583485] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.052598] EXT4-fs (dm-1): mounting ext2 file system using the ext4 subsystem
[ 23.081685] systemd-udevd[501]: starting version 204
[ 23.329605] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
[ 23.514835] lp: driver loaded but no devices found
[ 23.607874] ppdev: user-space parallel port driver
[ 25.544241] Bluetooth: Core ver 2.17
[ 25.544302] NET: Registered protocol family 31
[ 25.544308] Bluetooth: HCI device and connection manager initialized
[ 25.544325] Bluetooth: HCI socket layer initialized
[ 25.544334] Bluetooth: L2CAP socket layer initialized
[ 25.544346] Bluetooth: SCO socket layer initialized
[ 25.546950] ACPI: Video Device [PEG] (multi-head: yes rom: no post: no)
[ 25.548345] type=1400 audit(1424376980.709:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=670 comm="apparmor_parser"
[ 25.548364] type=1400 audit(1424376980.709:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=670 comm="apparmor_parser"
[ 25.550124] type=1400 audit(1424376980.709:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=670 comm="apparmor_parser"
[ 25.552257] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input17
[ 25.555309] cfg80211: Calling CRDA to update world regulatory domain
[ 25.706082] Bluetooth: RFCOMM TTY layer initialized
[ 25.706106] Bluetooth: RFCOMM socket layer initialized
[ 25.706119] Bluetooth: RFCOMM ver 1.11
[ 25.825232] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.825242] Bluetooth: BNEP filters: protocol multicast
[ 25.825263] Bluetooth: BNEP socket layer initialized
[ 25.890120] type=1400 audit(1424376981.049:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=703 comm="apparmor_parser"
[ 25.890144] type=1400 audit(1424376981.049:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=703 comm="apparmor_parser"
[ 25.890161] type=1400 audit(1424376981.049:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=703 comm="apparmor_parser"
[ 25.891879] type=1400 audit(1424376981.049:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=703 comm="apparmor_parser"
[ 25.891899] type=1400 audit(1424376981.049:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=703 comm="apparmor_parser"
[ 25.911407] type=1400 audit(1424376981.069:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=703 comm="apparmor_parser"
[ 25.998390] wmi: Mapper loaded
[ 26.287977] intel_rng: FWH not detected
[ 26.519389] lib80211: common routines for IEEE802.11 drivers
[ 26.519400] lib80211_crypt: registered algorithm 'NULL'
[ 26.661390] libipw: 802.11 data/management/control stack, git-1.1.13
[ 26.661400] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 26.690600] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 26.690619] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 26.690765] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 27.023545] type=1400 audit(1424376982.181:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=740 comm="apparmor_parser"
[ 27.078628] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 27.078638] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 27.078967] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 27.143376] [drm] Initialized drm 1.1.0 20060810
[ 27.272629] device-mapper: multipath: version 1.6.0 loaded
[ 28.474729] checking generic (c0000000 130000) vs hw (c0000000 10000000)
[ 28.474739] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 28.474831] Console: switching to colour dummy device 80x25
[ 28.493909] [drm] hdmi device not found 3 0 1
[ 28.494143] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x042800a1
[ 28.494151] nouveau [ DEVICE][0000:03:00.0] Chipset: NV42 (NV42)
[ 28.494158] nouveau [ DEVICE][0000:03:00.0] Family : NV40
[ 28.561818] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
[ 28.662578] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
[ 28.662586] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
[ 28.662979] nouveau [ VBIOS][0000:03:00.0] BIT signature found
[ 28.662989] nouveau [ VBIOS][0000:03:00.0] version 05.41.02.39.49
[ 28.708281] nouveau 0000:03:00.0: irq 42 for MSI/MSI-X
[ 28.708310] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
[ 28.708369] nouveau [ PFB][0000:03:00.0] RAM type: DDR1
[ 28.708376] nouveau [ PFB][0000:03:00.0] RAM size: 256 MiB
[ 28.708382] nouveau [ PFB][0000:03:00.0] ZCOMP: 189440 tags
[ 28.721183] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 29.742640] init: failsafe main process (821) killed by TERM signal
[ 29.986132] 2-004c supply vcc not found, using dummy regulator
[ 30.052760] nouveau [ PTHERM][0000:03:00.0] Found an adm1032 at address 0x4c (controlled by lm_sensors, temp offset +0 C)
[ 30.052774] nouveau [ I2C][0000:03:00.0] detected monitoring device: adm1032
[ 30.201403] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
[ 30.201436] nouveau [ PTHERM][0000:03:00.0] fan management: automatic
[ 30.201445] nouveau [ PTHERM][0000:03:00.0] internal sensor: no
[ 30.201469] nouveau [ CLK][0000:03:00.0] 20: core 100 MHz shader 100 MHz memory 220 MHz
[ 30.201482] nouveau [ CLK][0000:03:00.0] 21: core 200 MHz shader 200 MHz memory 400 MHz
[ 30.201494] nouveau [ CLK][0000:03:00.0] 22: core 325 MHz shader 325 MHz memory 600 MHz
[ 30.201513] nouveau [ CLK][0000:03:00.0] --: core 200 MHz shader 200 MHz memory 401 MHz
[ 30.222696] [TTM] Zone kernel: Available graphics memory: 440294 kiB
[ 30.222706] [TTM] Zone highmem: Available graphics memory: 1032074 kiB
[ 30.222711] [TTM] Initializing pool allocator
[ 30.222725] [TTM] Initializing DMA pool allocator
[ 30.223732] nouveau [ DRM] VRAM: 251 MiB
[ 30.223742] nouveau [ DRM] GART: 512 MiB
[ 30.223754] nouveau [ DRM] TMDS table version 1.1
[ 30.223760] nouveau [ DRM] DCB version 3.0
[ 30.223769] nouveau [ DRM] DCB outp 00: 01000300 00000023
[ 30.223777] nouveau [ DRM] DCB outp 01: 03015323 00000004
[ 30.223784] nouveau [ DRM] DCB outp 02: 04024312 00000000
[ 30.223791] nouveau [ DRM] DCB outp 03: 020313f1 0084c080
[ 30.223797] nouveau [ DRM] DCB conn 00: 0000
[ 30.223805] nouveau [ DRM] DCB conn 01: 0110
[ 30.223811] nouveau [ DRM] DCB conn 02: 0111
[ 30.223817] nouveau [ DRM] DCB conn 03: 0113
[ 30.223823] nouveau [ DRM] DCB conn 04: 0230
[ 30.223829] nouveau [ DRM] DCB conn 05: 0340
[ 30.223840] nouveau W[ DRM] Pointer to flat panel table invalid
[ 30.277793] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 30.277803] [drm] No driver support for vblank timestamp query.
[ 30.277816] nouveau [ DRM] 0xD0F4: Parsing digital output script table
[ 30.547171] nouveau [ DRM] MM: using M2MF for buffer copies
[ 30.547195] nouveau [ DRM] Calling LVDS script 6:
[ 30.547202] nouveau [ DRM] 0xCE3E: Parsing digital output script table
[ 30.825052] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
[ 31.141284] nouveau [ DRM] allocated 1440x900 fb: 0x9000, bo f2c88000
[ 31.150575] fbcon: nouveaufb (fb0) is primary device
[ 31.258822] type=1400 audit(1424376986.417:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=994 comm="apparmor_parser"
[ 31.258839] type=1400 audit(1424376986.417:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=994 comm="apparmor_parser"
[ 31.259901] type=1400 audit(1424376986.417:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=994 comm="apparmor_parser"
[ 31.277505] cfg80211: World regulatory domain updated:
[ 31.277507] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 31.277512] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 31.277515] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 31.277519] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 31.277522] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 31.277525] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 31.309302] type=1400 audit(1424376986.469:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=996 comm="apparmor_parser"
[ 31.309320] type=1400 audit(1424376986.469:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=996 comm="apparmor_parser"
[ 31.309334] type=1400 audit(1424376986.469:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=996 comm="apparmor_parser"
[ 31.311046] type=1400 audit(1424376986.469:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=996 comm="apparmor_parser"
[ 31.311059] type=1400 audit(1424376986.469:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=996 comm="apparmor_parser"
[ 31.311939] type=1400 audit(1424376986.469:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=996 comm="apparmor_parser"
[ 31.333073] nouveau [ DRM] Calling LVDS script 2:
[ 31.333079] nouveau [ DRM] 0xCEB5: Parsing digital output script table
[ 31.448234] nouveau [ DRM] Calling LVDS script 5:
[ 31.448238] nouveau [ DRM] 0xCE1A: Parsing digital output script table
[ 31.733756] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 31.759609] gpio_ich: ACPI BAR is unavailable, GPI 0 - 15 unavailable
[ 31.772832] gpio_ich: GPIO from 206 to 255 on gpio_ich
[ 31.817589] type=1400 audit(1424376986.977:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=997 comm="apparmor_parser"
[ 31.912541] Console: switching to colour frame buffer device 180x56
[ 31.914973] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[ 31.914981] nouveau 0000:03:00.0: registered panic notifier
[ 31.932869] [drm] Initialized nouveau 1.1.2 20120801 for 0000:03:00.0 on minor 0
[ 32.319671] autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
[ 32.319682] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 32.319688] hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 32.319692] mono: mono_out=0x0
[ 32.319695] inputs:
[ 32.319701] Mic=0x19
[ 32.319704] dig-in=0x1f
[ 32.319710] realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
[ 32.319714] realtek: Enable default setup for auto mode as fallback
[ 34.216553] r8169 0000:01:05.0 eth0: link down
[ 34.216616] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.217851] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.308590] lib80211_crypt: registered algorithm 'CCMP'
[ 35.353427] lib80211_crypt: registered algorithm 'TKIP'
[ 35.577897] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 35.578192] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 36.172405] systemd-udevd[529]: conflicting device node '/dev/mapper/via_jigbaahcd2' found, link to '/dev/dm-2' will not be created
[ 36.180743] systemd-udevd[532]: conflicting device node '/dev/mapper/via_jigbaahcd5' found, link to '/dev/dm-3' will not be created
[ 38.411994] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 46.472686] init: plymouth-upstart-bridge main process ended, respawning
[ 46.521392] init: plymouth-upstart-bridge main process (1443) terminated with status 1
[ 46.521433] init: plymouth-upstart-bridge main process ended, respawning
[ 52.010239] init: anacron main process (1312) killed by TERM signal
[ 1142.757083] perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000