Klocka Q6600 Utan Kunskap
Hej!
Tänkte ge mig på att klocka enligt följande spec. Har endast lite Googlande som erfarenhet. Vet ej heller hur mycket jag skall våga/kan klocka?
Moderkort: Abit IP35 E
Processor: core 2 quad q6600
Ram minne: 2 x KVR800D2N6/2G
OS: Win 7 64-bit
Spec på ram:
KVR800D2N6/2G
2GB 2Rx8 256M x 64-Bit DDR2-800
CL6 240-Pin DIMM
Clock Cycle Time (tCK) 2.5ns (min.) / 8ns (max.)
Row Cycle Time (tRCmin) 60ns (min.)
Refresh to Active/Refresh 127.5ns (min.)
Command Time (tRFCmin)
Row Active Time (tRASmin) 45ns (min.) / 70,000 (max.)
Single Power Supply of +1.8V (+/- .1V)
Power Operating 2.016 W (Approx.*)
UL Rating 94 V - 0
Detta är det jag hittat vad andra har gjort men om jag förstått allt rätt så varierar resultaten.
"Here is a tutorial of the Abit IP35-E bios settings: Dev's Hardware
You are going to have to set your FSB to 333MHz, your CPU vcore to 1.30v, and you memory to 2.2v since they are crucial Ballistix. Then change the following memory timings:
CAS (tCL): 4
RAS to CAS Delay (tRCD): 4
RAS Precharge (tRP): 4
Cycle Time (tRAS): 12
Command Rate: 2T
Just be aware that you have to stress test the overclock with Prime95 for 8 hrs and make sure the temps, while running this test, stay under 68°C. Also grab CPU-Z to verify CPU and RAM speeds. These programs are located in the downloads section.
Note you might need less then 1.30v vcore. So if it is stable, try lowering the vcore a notch or 2 and see if it is still stable.
Ballistix specs:2x1Gb Ballistix DDR2 PC2-6400
Quote:
Module Size: 2GB kit (1GBx2)
Package: Ballistix 240-pin DIMM
Feature: DDR2 PC2-6400
Specs: DDR2 PC2-6400 • 4-4-4-12 • Unbuffered • NON-ECC • DDR2-800 • 2.2V"
Vad tror ni om detta?
Skall man våga prova och har ni några tips och råd?
Mvh