Edgerouter ingen publik ip
Hej jag har ett synnerligen frustrerande problem. Jag postade precis mitt problem på ubnt:s forum och orkar inte skriva om allt på svenska så copy läste nedan. Hjälp uppskattas.
__________________________
I have this weird issue that Google so far has not solved for me. Yesterday I bought an ER-6P. Before I have been using a synology ac2600 without any issues. I removed the synology and connected my pc to eth0 on the ER, manually set my pc to be in the 192.168.1.11 255.255.255.0 network. I manage to reach the web interface without a problem and followed the guide to make eth0 the wan port and lan1 lan2 on default up range. Once the router restarted I moved the cable from the pc to eth0 and plugged the network cable from the isp outlet right into eth0.
After these steps I manage to log back into the web gui from both lan interfaces. However, I have no internet access, the router can't ping outside the lan and when looking into the eth0 interface I see that it does not receive the public ip etc from the ISP. Just to make sure I connected the pc cable right to the isp outlet and sure enough it worked. Connected the synology again, worked.
After some reading I thought it might be the synology mac that somehow got locked at the ISP so I called them to make sure. They told me everything was in order (Not always a guarantee but...)
I can only assume that the eth0 port is working since I can get contact with the GUI prior to the wizard.
Been trying all the usual suspects, reset the router, power cycle it leaving it of for a minute etc. But simply put, it just won't receive the public ip via isp dhcp. Any ideas and help to solve this problem would be great