0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.131 (buildbot@2ccc8102e0c3) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7808-ef686b7292)) #0 SMP Thu Jun 27 12:18:52 2019
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Linksys WRT1900ACS
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c0931180, node_mem_map dfbf9000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] random: get_random_bytes called from 0xc08008bc with crng_init=0
[ 0.000000] percpu: Embedded 12 pages/cpu s18956 r8192 d22004 u49152
[ 0.000000] pcpu-alloc: s18956 r8192 d22004 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock5 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg)
[ 0.000000] Bootloader command line (ignored): console=ttyS0,115200 root=/dev/mtdblock5 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg)
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 510924K/524288K available (6144K kernel code, 198K rwdata, 812K rodata, 1024K init, 232K bss, 13364K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB)
[ 0.000000] .init : 0xc0800000 - 0xc0900000 (1024 kB)
[ 0.000000] .data : 0xc0900000 - 0xc0931a80 ( 199 kB)
[ 0.000000] .bss : 0xc0931a80 - 0xc096bb58 ( 233 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000007] sched_clock: 64 bits at 800MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.000016] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns
[ 0.000028] Switching to timer-based delay loop, resolution 1ns
[ 0.000140] Ignoring duplicate/late registration of read_current_timer delay
[ 0.000147] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000278] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.00 BogoMIPS (lpj=8000000)
[ 0.000285] pid_max: default: 32768 minimum: 301
[ 0.000338] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000343] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000557] CPU: Testing write buffer coherency: ok
[ 0.000568] CPU0: Spectre v2: using BPIALL workaround
[ 0.000665] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.000770] Setting up static identity map for 0x100000 - 0x100060
[ 0.000838] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.000908] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.000950] Hierarchical SRCU implementation.
[ 0.001126] smp: Bringing up secondary CPUs ...
[ 0.001238] Booting CPU 1
[ 0.001384] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.001386] CPU1: Spectre v2: using BPIALL workaround
[ 0.001433] smp: Brought up 1 node, 2 CPUs
[ 0.001438] SMP: Total of 2 processors activated (3200.00 BogoMIPS).
[ 0.001441] CPU: All CPU(s) started in SVC mode.
[ 0.002916] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.002963] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.002970] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.003016] pinctrl core: initialized pinctrl subsystem
[ 0.003317] NET: Registered protocol family 16
[ 0.003815] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.004436] cpuidle: using governor ladder
[ 0.004593] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.004600] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.010142] reg-fixed-voltage usb3_1-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/usb3_1-vbus-pins, deferring probe
[ 0.010309] SCSI subsystem initialized
[ 0.010415] libata version 3.00 loaded.
[ 0.010492] usbcore: registered new interface driver usbfs
[ 0.010512] usbcore: registered new interface driver hub
[ 0.010536] usbcore: registered new device driver usb
[ 0.011191] clocksource: Switched to clocksource arm_global_timer
[ 0.011544] NET: Registered protocol family 2
[ 0.011783] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.011806] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.011838] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.011875] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.011890] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.011952] NET: Registered protocol family 1
[ 0.011965] PCI: CLS 0 bytes, default 64
[ 0.012950] Crashlog allocated RAM at address 0x3f00000
[ 0.013013] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.014444] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.014449] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.016452] io scheduler noop registered
[ 0.016459] io scheduler deadline registered (default)
[ 0.016880] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 0.017811] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00
[ 0.017819] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 0.017824] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 0.017829] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.017844] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[ 0.017926] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[ 0.017995] PCI: bus0: Fast back to back transfers disabled
[ 0.018001] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.018007] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.018054] pci 0000:01:00.0: [11ab:2a55] type 00 class 0x020000
[ 0.018076] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x400fffff 64bit pref]
[ 0.018086] pci 0000:01:00.0: reg 0x18: [mem 0x40100000-0x401fffff 64bit pref]
[ 0.018144] pci 0000:01:00.0: supports D1 D2
[ 0.018147] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.018205] PCI: bus1: Fast back to back transfers disabled
[ 0.018212] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.018261] pci 0000:02:00.0: [11ab:2a55] type 00 class 0x020000
[ 0.018289] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x420fffff 64bit pref]
[ 0.018301] pci 0000:02:00.0: reg 0x18: [mem 0x42100000-0x421fffff 64bit pref]
[ 0.018379] pci 0000:02:00.0: supports D1 D2
[ 0.018382] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.018438] PCI: bus2: Fast back to back transfers disabled
[ 0.018444] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.018459] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe01fffff]
[ 0.018465] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0200000-0xe03fffff]
[ 0.018472] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.018482] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0100000-0xe01fffff 64bit pref]
[ 0.018491] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.018497] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe01fffff]
[ 0.018504] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[ 0.018515] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0300000-0xe03fffff 64bit pref]
[ 0.018524] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.018529] pci 0000:00:02.0: bridge window [mem 0xe0200000-0xe03fffff]
[ 0.018739] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.061631] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.061735] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.121598] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.121737] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.122352] console [ttyS0] disabled
[ 0.142426] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 12500000) is a 16550A
[ 0.914948] console [ttyS0] enabled
[ 0.919938] loop: module loaded
[ 0.923402] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 0.932495] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 0.941629] scsi host0: ahci-mvebu
[ 0.945178] scsi host1: ahci-mvebu
[ 0.948658] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[ 0.956619] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[ 0.964937] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
[ 0.972712] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[ 0.979091] nand: AMD/Spansion S34ML01G2
[ 0.983037] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.990639] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048
[ 0.997820] Bad block table found at page 65472, version 0x01
[ 1.003926] Bad block table found at page 65408, version 0x01
[ 1.009958] 10 fixed-partitions partitions found on MTD device pxa3xx_nand-0
[ 1.017042] Creating 10 MTD partitions on "pxa3xx_nand-0":
[ 1.022554] 0x000000000000-0x000000200000 : "u-boot"
[ 1.027760] 0x000000200000-0x000000240000 : "u_env"
[ 1.032861] 0x000000240000-0x000000280000 : "s_env"
[ 1.037933] 0x000000900000-0x000000a00000 : "devinfo"
[ 1.043192] 0x000000a00000-0x000003200000 : "kernel1"
[ 1.048520] 0x000001000000-0x000003200000 : "ubi"
[ 1.053500] 0x000003200000-0x000005a00000 : "kernel2"
[ 1.058832] 0x000003800000-0x000005a00000 : "rootfs2"
[ 1.064163] 0x000005a00000-0x000008000000 : "syscfg"
[ 1.069404] 0x000000280000-0x000000900000 : "unused_area"
[ 1.075341] libphy: Fixed MDIO Bus: probed
[ 1.079740] libphy: orion_mdio_bus: probed
[ 1.084030] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.092742] mvneta f1070000.ethernet eth0: Using hardware mac address 58:ef:68:b7:0c:8c
[ 1.102020] mvneta f1034000.ethernet eth1: Using random mac address 52:f4:75:ba:12:38
[ 1.110030] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.116593] ehci-pci: EHCI PCI platform driver
[ 1.121082] ehci-platform: EHCI generic platform driver
[ 1.126398] ehci-orion: EHCI orion driver
[ 1.130505] orion-ehci f1058000.usb: EHCI Host Controller
[ 1.135940] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 1.143587] orion-ehci f1058000.usb: irq 38, io mem 0xf1058000
[ 1.171167] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 1.177314] hub 1-0:1.0: USB hub found
[ 1.181091] hub 1-0:1.0: 1 port detected
[ 1.185450] usbcore: registered new interface driver usb-storage
[ 1.191642] i2c /dev entries driver
[ 1.206453] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.218895] orion_wdt: Initial timeout 171 sec
[ 1.223596] sdhci: Secure Digital Host Controller Interface driver
[ 1.229801] sdhci: Copyright(c) Pierre Ossman
[ 1.234267] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.243471] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 1.251055] NET: Registered protocol family 10
[ 1.255988] Segment Routing with IPv6
[ 1.259692] NET: Registered protocol family 17
[ 1.264177] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.277290] 8021q: 802.1Q VLAN Support v1.8
[ 1.281552] Registering SWP/SWPB emulation handler
[ 1.287802] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.292606] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.293207] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[ 1.298584] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.306135] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 1.320776] xhci-hcd f10f8000.usb3: irq 43, io mem 0xf10f8000
[ 1.326779] hub 2-0:1.0: USB hub found
[ 1.330559] hub 2-0:1.0: 1 port detected
[ 1.334610] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.339949] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[ 1.347477] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[ 1.353978] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.362272] hub 3-0:1.0: USB hub found
[ 1.366050] hub 3-0:1.0: 1 port detected
[ 1.370333] UBI: auto-attach mtd5
[ 1.373696] ubi0: attaching mtd5
[ 1.384253] random: fast init done
[ 1.470925] ubi0: scanning is finished
[ 1.478943] ubi0: attached mtd5 (name "ubi", size 34 MiB)
[ 1.484374] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.491281] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.498096] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.505088] ubi0: good PEBs: 272, bad PEBs: 0, corrupted PEBs: 0
[ 1.511118] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 1.518372] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1183894745
[ 1.527545] ubi0: available PEBs: 0, total reserved PEBs: 272, PEBs reserved for bad PEB handling: 20
[ 1.536816] ubi0: background thread "ubi_bgt0d" started, PID 697
[ 1.543073] block ubiblock0_0: created from ubi0:0(rootfs)
[ 1.548581] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 1.555762] mvsw61xx 10.mvsw61xx: Found MV88E6176 at f1072004.mdio-mii:10
[ 1.562586] mvsw61xx 10.mvsw61xx: Using direct addressing
[ 1.577552] hctosys: unable to open rtc device (rtc0)
[ 1.582974] Waiting 1 sec before mounting root device...
[ 2.633042] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.640751] Freeing unused kernel memory: 1024K
[ 2.836816] init: Console is alive
[ 2.840300] init: - watchdog -
[ 3.013247] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.046825] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.054808] init: - preinit -
[ 3.195482] mvneta f1070000.ethernet tmp0: renamed from eth0
[ 3.201359] random: procd: uninitialized urandom read (4 bytes read)
[ 3.262587] mvneta f1034000.ethernet eth0: renamed from eth1
[ 3.302513] mvneta f1070000.ethernet eth1: renamed from tmp0
[ 3.587102] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.604137] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.780396] mvneta f1034000.ethernet eth0: configuring for fixed/sgmii link mode
[ 3.788230] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.794283] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 3.802234] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.883789] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 806
[ 6.904698] UBIFS (ubi0:1): recovery needed
[ 6.975284] UBIFS (ubi0:1): recovery completed
[ 6.979777] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 6.987651] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 6.997638] UBIFS (ubi0:1): FS size: 27934720 bytes (26 MiB, 220 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
[ 7.008122] UBIFS (ubi0:1): reserved for root: 1319425 bytes (1288 KiB)
[ 7.014769] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID B343E18F-C33A-4D32-962C-09B5CD6028EB, small LPT model
[ 7.027491] mount_root: switching to ubifs overlay
[ 7.074974] ubi1: attaching mtd8
[ 7.176720] ubi1: scanning is finished
[ 7.184769] ubi1: attached mtd8 (name "syscfg", size 38 MiB)
[ 7.190453] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 7.197366] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 7.204186] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 7.211179] ubi1: good PEBs: 296, bad PEBs: 8, corrupted PEBs: 0
[ 7.217279] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 7.224547] ubi1: max/mean erase counter: 371/234, WL threshold: 4096, image sequence number: 1071990009
[ 7.234071] ubi1: available PEBs: 0, total reserved PEBs: 296, PEBs reserved for bad PEB handling: 12
[ 7.243337] ubi1: background thread "ubi_bgt1d" started, PID 816
[ 7.253279] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 820
[ 7.281832] UBIFS (ubi1:0): recovery needed
[ 7.335766] random: crng init done
[ 7.339181] random: 3 urandom warning(s) missed due to ratelimiting
[ 7.358052] UBIFS (ubi1:0): recovery completed
[ 7.362550] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "syscfg"
[ 7.369980] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.379945] UBIFS (ubi1:0): FS size: 34283520 bytes (32 MiB, 270 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs)
[ 7.390450] UBIFS (ubi1:0): reserved for root: 1619295 bytes (1581 KiB)
[ 7.397097] UBIFS (ubi1:0): media format: w4/r0 (latest is w5/r0), UUID 87A41588-52C9-47EF-98C5-135CD785042D, small LPT model
[ 7.410131] urandom-seed: Seeding with /etc/urandom.seed
[ 7.446189] mvneta f1034000.ethernet eth0: Link is Down
[ 7.493338] procd: - early -
[ 7.496253] procd: - watchdog -
[ 8.107641] procd: - watchdog -
[ 8.110879] procd: - ubus -
[ 8.165031] procd: - init -
[ 8.261650] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.269074] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.276025] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 8.284082] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 8.298001] <<Marvell Mac80211 Wireless PCIE Network Driver version 10.3.8.0-20181114>>
[ 8.306087] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 8.311864] ieee80211 phy0: priv->pcmd_buf = de320000 priv->pphys_cmd_buf = 1e320000
[ 8.318223] ieee80211 phy0: fw download start
[ 8.434973] ieee80211 phy0: FwSize = 118776 downloaded Size = 118776 curr_iteration 65496
[ 9.407164] ieee80211 phy0: fw download complete
[ 9.407175] ieee80211 phy0: device node: /soc/pcie/pcie@1,0
[ 9.413327] ieee80211 phy0: pcmd = de320000
[ 9.430182] ieee80211 phy0: firmware version: 0x702091a
[ 9.781161] ieee80211 phy0: firmware region code: 30
[ 9.819992] ieee80211 phy0: 2G disabled, 5G enabled
[ 9.824925] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[ 9.830533] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 9.836348] ieee80211 phy1: priv->pcmd_buf = ddfd8000 priv->pphys_cmd_buf = 1dfd8000
[ 9.841189] ieee80211 phy1: fw download start
[ 9.960486] ieee80211 phy1: FwSize = 118776 downloaded Size = 118776 curr_iteration 65513
[ 10.917169] ieee80211 phy1: fw download complete
[ 10.917187] ieee80211 phy1: device node: /soc/pcie/pcie@2,0
[ 10.923252] ieee80211 phy1: pcmd = ddfd8000
[ 10.940185] ieee80211 phy1: firmware version: 0x702091a
[ 11.291161] ieee80211 phy1: firmware region code: 30
[ 11.327951] ieee80211 phy1: 2G enabled, 5G disabled
[ 11.332878] ieee80211 phy1: 4 TX antennas, 4 RX antennas
[ 11.339381] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.346799] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 11.363140] xt_time: kernel timezone is -0000
[ 11.369338] PPP generic driver version 2.4.2
[ 11.374174] NET: Registered protocol family 24
[ 11.379328] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 12.605818] mvneta f1034000.ethernet eth0: configuring for fixed/sgmii link mode
[ 12.613364] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.619273] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 12.627178] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.634959] br-lan: port 1(eth0.1) entered blocking state
[ 12.640388] br-lan: port 1(eth0.1) entered disabled state
[ 12.646031] device eth0.1 entered promiscuous mode
[ 12.650847] device eth0 entered promiscuous mode
[ 12.656280] br-lan: port 1(eth0.1) entered blocking state
[ 12.661726] br-lan: port 1(eth0.1) entered forwarding state
[ 12.667406] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 12.685025] mvneta f1070000.ethernet eth1: configuring for fixed/rgmii-id link mode
[ 12.693198] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 12.699156] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 12.715310] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 13.671209] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready