Halloj, har lite problem med mitt twinhan dvb-t pci kort, det identifieras nämligen som dvb-s i ubuntu (satelit), vilken ger som följd att jag inte kan hitta några kanaler.
Nån som har tips på hur jag ska kunna lösa detta?
Tillagda moduler i /etc/modules
#DTV
dvb-bt8xx
videodev
bttv card=0x71 i2c_hw=1
dvb-core
dst dst_type=1
Relevanta rader i dmesg:
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 19, latency: 32, mmio: 0xcfdfe000
bttv0: detected: Twinhan VisionPlus DVB-T [card="113"], PCI subsystem ID is 1822:0001
bttv0: using: Twinhan DST + clones [card="113,autodetected"]
bttv0: gpio: en=00000000, out=00000000 in=00f500fd [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI interrupt 0000:00:0b.1[A] -> GSI 19 (level, low) -> IRQ 19
bt878(0): Bt878 (rev 17) at 00:0b.1, irq: 19, latency: 32, memory: 0xcfdff000
DVB: registering new adapter (bttv0).
DVB: registering frontend 0 (DST DVB-S)...
(Linux dist: Ubuntu, Frontend: Mythtv)
mitt gör detsamma i Windows. har inte testat det i Linux än dock.
http://users.bigpond.net.au/GympieElectronicService/mythtvHow...
Kanske något som kan hjälpa...
Testat olika dst_types?
T.ex. (/etc/modules)
dst dst_type=0
Har aldrig använt TV-kort i Linux så det är bara vilda gissningar.
Ursprungligen inskrivet av Marwin
http://users.bigpond.net.au/GympieElectronicService/mythtvHow...
Kanske något som kan hjälpa...
Testat olika dst_types?
T.ex. (/etc/modules)
dst dst_type=0
Har aldrig använt TV-kort i Linux så det är bara vilda gissningar.
Testat 0 och 1, har inte hittat nån dokumentation om det :/
Copyright © 1999–2024 Geeks AB. Allt innehåll tillhör Geeks AB.
Citering är tillåten om källan anges.