rtorret problem
Så fort jag ska börja ladda ner en torrent så får jag detta problemet, och plats på hårddisken är det... hjälp.
Http [0] xxxxx.ISO done
Caught Unlisted, dumping stack:0.0 / 0.0 KiB Listen: 83.226.167.233:6890 Bind: 83.226.167.233 [ 0/ 0/768]
0 rtorrent [0x8054e6f]
1 rtorrent [0x8057172]
2 rtorrent [0x806170d]
3 [0xffffe420]
4 /usr/lib/libcrypto.so.0.9.7(sha1_block_asm_data_order+0x25) [0xb7db7735]
A bus error propably means you ran out of diskspace.
TO AVOID CORRUPT DOWNLOADS, RUN "touch" ON ALL DOWNLOADED FILES OR INITATE HASH RECHECK WITH ^R ON ALL TORRENTS.
# This is an example resource file for rTorrent. Copy to
# ~/.rtorrent.rc and enable/modify the options as needed. Remember to
# uncomment the options you wish to enable.
# Minumum amount of peers to connect per torrent, if available.
#min_peers = 40
# Minumum amount of peers to connect per torrent.
#max_peers = 100
# Maximum number of simultanious uploads per torrent.
max_uploads = 1
# Global download rate in KiB. "0" for unlimited.
#download_rate = 0
# Global upload rate in KiB. "0" for unlimited.
upload_rate = 10
# Default directory to save downloaded files. Note it doesn't support
# space yet.
directory = /home/fabian/Backup/Media/rtorrent/
# Default session directory. Make sure you don't run multiple instance
# of rtorrent using the same session directory. Perhaps using a
# relative path?
#session = /home/fabian/Backup/Media/rtorrent
# The ip address reported to the tracker.
ip = xxxx <---x = du får inte se ;)
# The ip address the listening socket and outgoing connections is
# bound to.
bind = xxxx <---x = du får inte se ;)
# Port range to use for listening.
port_range = 6890-6999
#port_range =
# Start opening ports at a random position within the port range.
port_random = no
# Check hash for finished torrents. Might be usefull until the bug is
# fixed that causes lack of diskspace not to be properly reported.
check_hash = yes
# Set whetever the client should try to connect to UDP trackers.
use_udp_trackers = yes
#
# Do not modify the following parameters unless you know what you're doing.
#
# Hash read-ahead controls how many MB to request the kernel to read
# ahead. If the value is too low the disk may not be fully utilized,
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
# while if too high the kernel might not be able to keep the read
# pages in memory thus end up trashing.
#hash_read_ahead = 10
# Interval between attempts to check the hash, in milliseconds.
#hash_interval = 100
# Number of attempts to check the hash while using the mincore status,
# before forcing. Overworked systems might need lower values to get a
# decent hash checking rate.
#hash_max_tries = 10
# Max number of files to keep open simultaniously.
#max_open_files = 128
# Number of sockets to simultaneously keep open.
#max_open_sockets = <no default>
# Dump data received from trackers to the files
# "./tracker_dump.<time>".
#tracker_dump = no
# Change the interval between each throttle tick, in milliseconds. In
# the range 1-5000 ms.
#throttle_interval = 1000