Prob med SuSE10.2, XGL o Compiz

Halloj

Har problem med att få Compiz att fungera. Använder ett 6200 128MB kort, med senaste nvidia drivers som jag installerat mha sh "drivernamn" -q. Får upp nvidia-loggan när suse startas, men när jag går in i "Desktop Effects" kontrollpanelen (i Gnome) står det:

"Your graphics card is not known to be supported by Xgl, and it is not currently configured for 3D acceleration. Xgl cannot be enabled. However, if 3D acceleration can be enabled on this card, then it might be possible to run Xgl.

You might be able to fix this using the SaX2 configuration tool. Press the button below if you'd like to try running SaX2." Vad kan jag gjort för fel?

xorg.conf ser ut såhär:

# /.../
# SaX generated X11 config file
# Created on: 2007-03-31T13:31:31+0200.
#
# Version: 8.1
# Contact: Marcus Schaefer <sax@suse.de>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [ISaX] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
FontPath "unix/:7100"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
EndSection

Section "Module"
Load "extmod"
Load "type1"
Load "glx"
Load "freetype"
Load "dbe"
Load "v4l"
EndSection

Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "se"
Option "XkbModel" "pc105"
Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "5"
EndSection

Section "Module"
Load "extmod"
Load "type1"
Load "glx"
Load "freetype"
Load "dbe"
Load "v4l"
EndSection

Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "se"
Option "XkbModel" "pc105"
Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "ImPS/2 Logitech Wheel Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
DisplaySize 338 270
HorizSync 30-80
Identifier "Monitor[0]"
ModelName "7005L"
Option "DPMS"
VendorName "KTC"
VertRefresh 43-75
UseModes "Modes[0]"
EndSection

Section "Modes"
Identifier "Modes[0]"
EndSection

Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768$
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768$
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768$
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768$
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection

Section "Device"
BoardName "GeForce 6200 (0x0221)"
BusID "1:0:0"
Driver "nvidia"
Identifier "Device[0]"
Option "CIOverlay"
Option "Dac8Bit"
Option "RenderAccel"
Option "HWcursor"
Option "Overlay"
Option "AllowDFPStereo"
Option "CursorShadow"
Screen 0
VendorName "NVidia"
EndSection

Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768$
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768$
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768$
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1280x960" "1280x800" "1152x864" "1280x768" "1024x768$
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection

Section "Device"
BoardName "GeForce 6200 (0x0221)"
BusID "1:0:0"
Driver "nvidia"
Identifier "Device[0]"
Option "CIOverlay"
Option "Dac8Bit"
Option "RenderAccel"
Option "HWcursor"
Option "Overlay"
Option "AllowDFPStereo"
Option "CursorShadow"
Screen 0
VendorName "NVidia"
EndSection

Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection

Command not found

Det ger så mkt som:

"direct rendering: Yes"