H100 fan control

2011-07-28 13:16

Permalänk

hurtone

Medlem

Plats: Stockholm
Registrerad: Jul 2011

●

H100 fan control

Dear Corsair,

I would appreciate if you could answer a question regarding the fan control on the Hydro H100. It appears as if the fan sockets on the cooling block are of the 4-pin configuration. Which of the following options is true:

1. The fan control is built in, disregards the control from the CPU_Fan socket on the motherboard, and is only compatible with PWM-controlled fans. 3-pin fans will not be properly controlled.
2. The fan control can control both PWM and 3-pin fans.
3. The fan control is a simple passthrough from the motherboard, so if the motherboard can control 3-pin fans, the block can as well.
4. The built in block can not control 3-pin fans, but if you have the fans connected to the Corsair Link Cooling Kit, you can have fan control based on CPU-temp.

Many thanks!

Rapportera Redigera

Citera flera Citera

2011-08-12 14:15

Permalänk

Blackbeard

Corsair

Plats: UK
Registrerad: Okt 2008

●

If you connect the fans to the H100 pump then the fan controller in the pump unit will control the RPM, based on the performance profile you select on the pump (Quiet, Balanced, Performance), and the temperature of the coolant. The profile basically sets the speed range of the fan - 900 - 1300rpm for Quiet, 1300 - 2000rpm for Balanced, and 1600 - 2600rpm for Performance.

3-pin and 4-pin fans should work - both are controlled by PWM, via the fan controller in the pump.

With Corsair Link, you can control the fans pretty much any way you like, based on coolant temp, CPU temp, GPU temp, or any other temp sensor you connect. And you can define custom profiles, set the RPM exactly and so forth.

Visa signatur

Corsair Support Forum

Rapportera Redigera

Citera flera Citera

2011-08-18 19:06

Permalänk

w00kiE

Medlem

Plats: Kungsbacka
Registrerad: Nov 2010

●

Sounds great! But where can I buy the Corsair Link Cooling Kit?

Senast redigerat 2011-08-18 21:04

Visa signatur

Intel i5 2500K l Corsair H80 l Asus P8P67 Pro l GeForce GTX 560 Ti OC 1GB l Corsair 8GB 1600 MHz Vengeance l Corsair SSD Force GT 120GB l Western Digital Caviar 2TB l Corsair HX 850W l Samsung SH-S222AB l NZXT H2 l Windows 7 64-bit

Rapportera Redigera

Citera flera Citera

2011-09-30 17:47

Permalänk

Nautilus011

Medlem ★

Plats: Norrköping
Registrerad: Jun 2008

●

Skrivet av Blackbeard:

If you connect the fans to the H100 pump then the fan controller in the pump unit will control the RPM, based on the performance profile you select on the pump (Quiet, Balanced, Performance), and the temperature of the coolant. The profile basically sets the speed range of the fan - 900 - 1300rpm for Quiet, 1300 - 2000rpm for Balanced, and 1600 - 2600rpm for Performance.

3-pin and 4-pin fans should work - both are controlled by PWM, via the fan controller in the pump.

With Corsair Link, you can control the fans pretty much any way you like, based on coolant temp, CPU temp, GPU temp, or any other temp sensor you connect. And you can define custom profiles, set the RPM exactly and so forth.

Gå till inlägget

Iv put 4 Scythe GT 1850rpm fans (3pin), and they Dont work. Im trying to find out why.

Visa signatur

Skärm: Acer XB271 HU, Keyboard: Corsair k95
Moderkort: Asus Prime-A Z690, GPU: RTX 4080
CPU: Intel i7 13700k, Ram: 32Gb DDR5 6000Hz
Chassi: Lian Li Lancool 3, Högtalare: ALTEC LANSING 5.1 THX
Disk 1: WD 850x 1Tb, Disk 2: WD 850x 2Tb,PSU: Seasonic Prime 1000w

Rapportera Redigera

Citera flera Citera

2011-09-30 18:07

Permalänk

MarkSix

Medlem ★

Plats: Upplands Väsby
Registrerad: Jun 2008

●

3 pin fans are they really pwm? i thought only 4 pin fans were pwm because of the extra control signal for pwm

Visa signatur

https://valid.x86.fr/pyrh0w
https://valid.x86.fr/hc225t
https://valid.x86.fr/6dilbx
Ryzen 9 7950X, Asus X670E Hero, 64GB ram, Zotac RTX 4090 AMP Extreme AIRO, Seasonic SnowSilent 1050, CORSAIR 7000D Airflow, Custom loop för CPU med ett Phanteks Glacier C360A CPU Block.
Det enda jag med säkerhet vet är att jag ingenting med säkerhet vet

Rapportera Redigera

Citera flera Citera

2011-09-30 18:24

Permalänk

jokke021

Medlem

Registrerad: Jul 2007

●

Skrivet av Blackbeard:

If you connect the fans to the H100 pump then the fan controller in the pump unit will control the RPM, based on the performance profile you select on the pump (Quiet, Balanced, Performance), and the temperature of the coolant. The profile basically sets the speed range of the fan - 900 - 1300rpm for Quiet, 1300 - 2000rpm for Balanced, and 1600 - 2600rpm for Performance.

3-pin and 4-pin fans should work - both are controlled by PWM, via the fan controller in the pump.

With Corsair Link, you can control the fans pretty much any way you like, based on coolant temp, CPU temp, GPU temp, or any other temp sensor you connect. And you can define custom profiles, set the RPM exactly and so forth.

Gå till inlägget

Skrivet av w00kiE:

Sounds great! But where can I buy the Corsair Link Cooling Kit?

Gå till inlägget

Wondering the same thing.
It´s out of stock on www.Corsair.com, where can i find another dealer for Corsair Link?

Rapportera Redigera

Citera flera Citera

2011-09-30 19:38

Permalänk

michael123

Avstängd