Hur vet jag om raid fungerar? Amilo M3458g

Permalänk
Medlem

Hur vet jag om raid fungerar? Amilo M3458g

Ska installera linux åt min morfar (jorå!) och det går rätt bra. Skulle köra debian först men fick inte nätverkskortet att fungera, även om jag laddade in firmware så gick det inte att logga in på routern, stod att det var fel lösenord fast jag trippelkollade :/

Det är hur som helst inte mitt problem just nu för jag installerade xubuntu istället, jag vet inte om min raid konfiguration fungerar och undrar ödmjukt om någon kan se det på bilden HÄR

Eller vilken kommando kan jag använda, eller program om det är lättare.

Om någon vet om att det kan finnas någon enkel förklaring till varför debian inte vill logga in på min router vore det också trevligt

Permalänk
Medlem

Trolig orsak att du inte kunde logga in på din router är att lösenordet innehåller tecken, som kodas olika i UTF-8 (Linux) och ISO 8859-1 (Windows). Sådana är t.ex å, ä och ö. Har inte användt RAID men enligt din bild verkar arrayen (/dev/md-0) fungera. RAID 1 eller RAID 0?

Permalänk
Medlem

cat /proc/mdstat kanske kan fungera?

Permalänk
Medlem
Skrivet av fagerja:

Trolig orsak att du inte kunde logga in på din router är att lösenordet innehåller tecken, som kodas olika i UTF-8 (Linux) och ISO 8859-1 (Windows). Sådana är t.ex å, ä och ö. Har inte användt RAID men enligt din bild verkar arrayen (/dev/md-0) fungera. RAID 1 eller RAID 0?

Okej, fast lösenorder var bara internationella tecken eller vad man säger. Inga svenska specialare
Det är raid-1 och har kollat lite till, det ser ut som det fungerar men inte helt säker, får ett meddelande vid boot ang raiden. Och kunde bara installera om jag valde logiska volymer (så man kan ändra storlek och ta printar, kommer inte exakt ihåg vad fördelarna var det stod under installationen.)

Skrivet av Aene:

cat /proc/mdstat kanske kan fungera?

Nej det ger tomma resultat. Tyvärr.

Jag antar att det funkar, funkar okej för morfar iallafall Tack för hjälpen båda två!

Bifogar dmesg ifall någon blir sugen på att lura på detta.

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-45-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #74-Ubuntu SMP Tue Jan 13 19:37:48 UTC 2015 (Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffcffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007ffddfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007ffde000-0x000000007fffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000fed13000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: FUJITSU SIEMENS Amilo M3438 Series/P71EN0, BIOS 1.10C 10/05/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7ffd0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[ 0.000000] [mem 0x34000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x01b96000, 0x01b96fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35a66000-0x36d2afff]
[ 0.000000] ACPI: RSDP 000f8110 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7ffd0000 00003C (v01 A M I OEMRSDT 10000505 MSFT 00000097)
[ 0.000000] ACPI: FACP 7ffd0200 000084 (v02 A M I OEMFACP 10000505 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7ffd0430 004A43 (v01 UW____ F18_____ 00000001 INTL 02002026)
[ 0.000000] ACPI: FACS 7ffde000 000040
[ 0.000000] ACPI: APIC 7ffd0390 000054 (v01 A M I OEMAPIC 10000505 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ffd03f0 00003C (v01 A M I OEMMCFG 10000505 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7ffde040 000046 (v01 A M I AMI_OEM 10000505 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7ffd4e80 00003C (v01 A M I OEMMCFG 10000505 MSFT 00000097)
[ 0.000000] ACPI: SSDT 7ffd4ec0 0003F6 (v01 AMI CPU1PM 00000001 INTL 02002026)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1155MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x01b97000, 0x01b97fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x7ffcffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x7ffcffff]
[ 0.000000] On node 0 totalpages: 524142
[ 0.000000] free_area_init_node: node 0, pgdat c199d700, node_mem_map f4a66020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2312 pages used for memmap
[ 0.000000] HighMem zone: 295890 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xfed12fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7be4000 s36160 r0 d21184 u57344
[ 0.000000] pcpu-alloc: s36160 r0 d21184 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522358
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.13.0-45-generic root=/dev/mapper/xubuntu--vg-root ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4193912 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0007ffd0)
[ 0.000000] Memory: 2044020K/2096568K available (6547K kernel code, 641K rwdata, 2764K rodata, 876K init, 924K bss, 52548K reserved, 1183560K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc19bb000 - 0xc1a96000 ( 876 kB)
[ 0.000000] .data : 0xc1665134 - 0xc19ba580 (3413 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1665134 (6548 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1733.331 MHz processor
[ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3466.66 BogoMIPS (lpj=6933324)
[ 0.004009] pid_max: default: 32768 minimum: 301
[ 0.004056] Security Framework initialized
[ 0.004088] AppArmor: AppArmor initialized
[ 0.004090] Yama: becoming mindful.
[ 0.004201] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.004205] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.008408] Initializing cgroup subsys memory
[ 0.008423] Initializing cgroup subsys devices
[ 0.008428] Initializing cgroup subsys freezer
[ 0.008432] Initializing cgroup subsys blkio
[ 0.008436] Initializing cgroup subsys perf_event
[ 0.008440] Initializing cgroup subsys hugetlb
[ 0.008480] Disabled fast string operations
[ 0.008491] mce: CPU supports 5 MCE banks
[ 0.008504] CPU0: Thermal monitoring enabled (TM2)
[ 0.008520] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[ 0.008520] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
[ 0.008520] tlb_flushall_shift: 6
[ 0.022434] Freeing SMP alternatives memory: 32K (c1a96000 - c1a9e000)
[ 0.024442] ACPI: Core revision 20131115
[ 0.028685] ACPI: All ACPI Tables successfully acquired
[ 0.029096] ftrace: allocating 27841 entries in 55 pages
[ 0.040140] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040528] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.082297] smpboot: CPU0: Intel(R) Pentium(R) M processor 1.73GHz (fam: 06, model: 0d, stepping: 08)
[ 0.084000] Performance Events: p6 PMU driver.
[ 0.084000] ... version: 0
[ 0.084000] ... bit width: 32
[ 0.084000] ... generic registers: 2
[ 0.084000] ... value mask: 00000000ffffffff
[ 0.084000] ... max period: 000000007fffffff
[ 0.084000] ... fixed-purpose events: 0
[ 0.084000] ... event mask: 0000000000000003
[ 0.084000] x86: Booted up 1 node, 1 CPUs
[ 0.084000] smpboot: Total of 1 processors activated (3466.66 BogoMIPS)
[ 0.084000] devtmpfs: initialized
[ 0.084298] EVM: security.selinux
[ 0.084300] EVM: security.SMACK64
[ 0.084302] EVM: security.ima
[ 0.084304] EVM: security.capability
[ 0.084356] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.084474] PM: Registering ACPI NVS region [mem 0x7ffde000-0x7fffffff] (139264 bytes)
[ 0.086316] pinctrl core: initialized pinctrl subsystem
[ 0.086422] regulator-dummy: no parameters
[ 0.086459] RTC time: 20:15:55, date: 02/19/15
[ 0.086518] NET: Registered protocol family 16
[ 0.086770] EISA bus registered
[ 0.086773] cpuidle: using governor ladder
[ 0.086775] cpuidle: using governor menu
[ 0.086893] ACPI: bus type PCI registered
[ 0.086897] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.086998] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.087002] PCI: not using MMCONFIG
[ 0.087120] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.087148] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[ 0.087150] PCI: Using configuration type 1 for base access
[ 0.088963] bio: create slab <bio-0> at 0
[ 0.089174] ACPI: Added _OSI(Module Device)
[ 0.089177] ACPI: Added _OSI(Processor Device)
[ 0.089180] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.089182] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.091629] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.096054] ACPI: Interpreter enabled
[ 0.096073] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.096079] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.096100] ACPI: (supports S0 S3 S4 S5)
[ 0.096102] ACPI: Using IOAPIC for interrupt routing
[ 0.100012] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.105003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.105006] PCI: Using MMCONFIG for extended config space
[ 0.105027] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.105191] ACPI: No dock devices found.
[ 0.197860] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.197869] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.197878] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.198029] acpi PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.198033] acpi PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.198037] acpi PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.198040] acpi PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.198044] acpi PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff] (ignored)
[ 0.198047] PCI: root bus 00: using default resources
[ 0.198279] PCI host bridge to bus 0000:00
[ 0.198285] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.198289] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.198292] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.198305] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.198440] pci 0000:00:01.0: [8086:2591] type 01 class 0x060400
[ 0.198488] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.198554] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.198637] pci 0000:00:1b.0: [8086:2668] type 00 class 0x040300
[ 0.198656] pci 0000:00:1b.0: reg 0x10: [mem 0xfebf8000-0xfebfbfff 64bit]
[ 0.198727] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.198795] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.198847] pci 0000:00:1c.0: [8086:2660] type 01 class 0x060400
[ 0.198920] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.198989] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.199049] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.199091] pci 0000:00:1d.0: reg 0x20: [io 0xe480-0xe49f]
[ 0.199210] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.199252] pci 0000:00:1d.1: reg 0x20: [io 0xe800-0xe81f]
[ 0.199367] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.199410] pci 0000:00:1d.2: reg 0x20: [io 0xe880-0xe89f]
[ 0.199527] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.199570] pci 0000:00:1d.3: reg 0x20: [io 0xec00-0xec1f]
[ 0.199693] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.199715] pci 0000:00:1d.7: reg 0x10: [mem 0xfebffc00-0xfebfffff]
[ 0.199800] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.199915] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.200027] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.200081] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.200165] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.200176] pci 0000:00:1f.0: address space collision: [io 0x0800-0x087f] conflicts with ACPI CPU throttle [??? 0x00000810-0x00000815 flags 0x80000000]
[ 0.200182] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.200187] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 1600-167f
[ 0.200290] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
[ 0.200305] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007]
[ 0.200315] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003]
[ 0.200326] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007]
[ 0.200337] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003]
[ 0.200348] pci 0000:00:1f.1: reg 0x20: [io 0xffa0-0xffaf]
[ 0.200472] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.200526] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.200720] pci 0000:03:00.0: [10de:00c8] type 00 class 0x030000
[ 0.200733] pci 0000:03:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.200745] pci 0000:03:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.200758] pci 0000:03:00.0: reg 0x1c: [mem 0xfc000000-0xfcffffff 64bit]
[ 0.200773] pci 0000:03:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
[ 0.200858] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.200867] pci 0000:00:01.0: PCI bridge to [bus 03]
[ 0.200873] pci 0000:00:01.0: bridge window [mem 0xfaa00000-0xfeafffff]
[ 0.200878] pci 0000:00:01.0: bridge window [mem 0xbfe00000-0xdfefffff pref]
[ 0.200957] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.200963] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.200969] pci 0000:00:1c.0: bridge window [mem 0xbfc00000-0xbfcfffff]
[ 0.200976] pci 0000:00:1c.0: bridge window [mem 0xbfd00000-0xbfdfffff 64bit pref]
[ 0.201090] pci 0000:01:03.0: [8086:4220] type 00 class 0x028000
[ 0.201111] pci 0000:01:03.0: reg 0x10: [mem 0xfa9fe000-0xfa9fefff]
[ 0.201193] pci 0000:01:03.0: PME# supported from D0 D3hot D3cold
[ 0.201275] pci 0000:01:04.0: [104c:8023] type 00 class 0x0c0010
[ 0.201296] pci 0000:01:04.0: reg 0x10: [mem 0xfa9ff000-0xfa9ff7ff]
[ 0.201308] pci 0000:01:04.0: reg 0x14: [mem 0xfa9f8000-0xfa9fbfff]
[ 0.201382] pci 0000:01:04.0: supports D1 D2
[ 0.201386] pci 0000:01:04.0: PME# supported from D0 D1 D2 D3hot
[ 0.201464] pci 0000:01:05.0: [10ec:8169] type 00 class 0x020000
[ 0.201484] pci 0000:01:05.0: reg 0x10: [io 0xc800-0xc8ff]
[ 0.201496] pci 0000:01:05.0: reg 0x14: [mem 0xfa9ffc00-0xfa9ffcff]
[ 0.201542] pci 0000:01:05.0: reg 0x30: [mem 0xfa9c0000-0xfa9dffff pref]
[ 0.201572] pci 0000:01:05.0: supports D1 D2
[ 0.201576] pci 0000:01:05.0: PME# supported from D1 D2 D3hot D3cold
[ 0.201610] pci 0000:01:05.0: System wakeup disabled by ACPI
[ 0.201669] pci 0000:01:07.0: [1106:3249] type 00 class 0x010400
[ 0.201689] pci 0000:01:07.0: reg 0x10: [io 0xdc00-0xdc0f]
[ 0.201701] pci 0000:01:07.0: reg 0x14: [io 0xd880-0xd88f]
[ 0.201713] pci 0000:01:07.0: reg 0x18: [io 0xd800-0xd80f]
[ 0.201725] pci 0000:01:07.0: reg 0x1c: [io 0xd480-0xd48f]
[ 0.201737] pci 0000:01:07.0: reg 0x20: [io 0xd400-0xd41f]
[ 0.201749] pci 0000:01:07.0: reg 0x24: [io 0xd000-0xd0ff]
[ 0.201875] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.201880] pci 0000:00:1e.0: bridge window [io 0xc000-0xdfff]
[ 0.201886] pci 0000:00:1e.0: bridge window [mem 0xfa900000-0xfa9fffff]
[ 0.201893] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.201897] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.201914] pci_bus 0000:00: on NUMA node 0
[ 0.204297] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.204390] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.204480] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.204573] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.204663] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.204753] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.204844] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.208083] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.208251] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.208309] Found 1 acpi root devices
[ 0.208370] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.208512] vgaarb: setting as boot device: PCI:0000:03:00.0
[ 0.208516] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.208519] vgaarb: loaded
[ 0.208521] vgaarb: bridge control possible 0000:03:00.0
[ 0.208868] SCSI subsystem initialized
[ 0.208918] libata version 3.00 loaded.
[ 0.208960] ACPI: bus type USB registered
[ 0.208992] usbcore: registered new interface driver usbfs
[ 0.209007] usbcore: registered new interface driver hub
[ 0.209037] usbcore: registered new device driver usb
[ 0.209190] PCI: Using ACPI for IRQ routing
[ 0.209194] PCI: pci_cache_line_size set to 64 bytes
[ 0.209202] pci 0000:00:1e.0: address space collision: [io 0xc000-0xdfff] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
[ 0.209226] pci 0000:01:07.0: address space collision: [io 0xdc00-0xdc0f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
[ 0.209232] pci 0000:01:07.0: address space collision: [io 0xd880-0xd88f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
[ 0.209236] pci 0000:01:07.0: address space collision: [io 0xd800-0xd80f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
[ 0.209241] pci 0000:01:07.0: address space collision: [io 0xd480-0xd48f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
[ 0.209245] pci 0000:01:07.0: address space collision: [io 0xd400-0xd41f] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
[ 0.209250] pci 0000:01:07.0: address space collision: [io 0xd000-0xd0ff] conflicts with PCI Bus 0000:02 [io 0xd000-0xdfff]
[ 0.209279] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.209286] e820: reserve RAM buffer [mem 0x7ffd0000-0x7fffffff]
[ 0.209424] NetLabel: Initializing
[ 0.209427] NetLabel: domain hash size = 128
[ 0.209429] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.209448] NetLabel: unlabeled traffic allowed by default
[ 0.209726] hpet clockevent registered
[ 0.209731] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.209737] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.209743] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.211813] Switched to clocksource hpet
[ 0.219254] AppArmor: AppArmor Filesystem Enabled
[ 0.219330] pnp: PnP ACPI init
[ 0.219364] ACPI: bus type PNP registered
[ 0.219499] system 00:00: [mem 0xfed13000-0xfed19fff] has been reserved
[ 0.219507] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.219542] pnp 00:01: [dma 4]
[ 0.219575] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.219642] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.219752] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.219847] pnp 00:04: Plug and Play ACPI device, IDs SYN0802 SYN0800 PNP0f13 (active)
[ 0.219892] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.219938] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.220132] pnp 00:07: disabling [io 0x0010-0x001f] because it overlaps 0000:01:07.0 BAR 4 [io 0x0000-0x001f]
[ 0.220139] pnp 00:07: disabling [io 0x0010-0x001f disabled] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220143] pnp 00:07: disabling [io 0x0022-0x003f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220147] pnp 00:07: disabling [io 0x0044-0x004d] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220151] pnp 00:07: disabling [io 0x0050-0x005f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220155] pnp 00:07: disabling [io 0x0063] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220160] pnp 00:07: disabling [io 0x0065] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220164] pnp 00:07: disabling [io 0x0067-0x006f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220168] pnp 00:07: disabling [io 0x0072-0x007f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220172] pnp 00:07: disabling [io 0x0080] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220176] pnp 00:07: disabling [io 0x0084-0x0086] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220180] pnp 00:07: disabling [io 0x0088] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220185] pnp 00:07: disabling [io 0x008c-0x008e] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220189] pnp 00:07: disabling [io 0x0090-0x009f] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220193] pnp 00:07: disabling [io 0x00a2-0x00bf] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220197] pnp 00:07: disabling [io 0x00e0-0x00ef] because it overlaps 0000:01:07.0 BAR 5 [io 0x0000-0x00ff]
[ 0.220241] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.220246] system 00:07: [io 0x0800-0x087f] could not be reserved
[ 0.220250] system 00:07: [io 0x0480-0x04bf] has been reserved
[ 0.220255] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.220259] system 00:07: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.220263] system 00:07: [mem 0xffb00000-0xffbfffff] has been reserved
[ 0.220268] system 00:07: [mem 0xfff80000-0xffffffff] has been reserved
[ 0.220272] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.220383] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.220388] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.220392] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.220453] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.220458] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.226420] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.226425] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.226429] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.226434] system 00:0a: [mem 0x00100000-0x7fffffff] could not be reserved
[ 0.226439] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.226646] pnp: PnP ACPI: found 11 devices
[ 0.226649] ACPI: bus type PNP unregistered
[ 0.226653] PnPBIOS: Disabled by ACPI PNP
[ 0.263702] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.263712] pci 0000:00:1e.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.263716] pci 0000:00:01.0: PCI bridge to [bus 03]
[ 0.263723] pci 0000:00:01.0: bridge window [mem 0xfaa00000-0xfeafffff]
[ 0.263728] pci 0000:00:01.0: bridge window [mem 0xbfe00000-0xdfefffff pref]
[ 0.263734] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.263738] pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
[ 0.263744] pci 0000:00:1c.0: bridge window [mem 0xbfc00000-0xbfcfffff]
[ 0.263750] pci 0000:00:1c.0: bridge window [mem 0xbfd00000-0xbfdfffff 64bit pref]
[ 0.263760] pci 0000:01:07.0: BAR 5: assigned [io 0x1000-0x10ff]
[ 0.263767] pci 0000:01:07.0: BAR 4: assigned [io 0x1400-0x141f]
[ 0.263773] pci 0000:01:07.0: BAR 0: assigned [io 0x1420-0x142f]
[ 0.263780] pci 0000:01:07.0: BAR 1: assigned [io 0x1430-0x143f]
[ 0.263786] pci 0000:01:07.0: BAR 2: assigned [io 0x1440-0x144f]
[ 0.263792] pci 0000:01:07.0: BAR 3: assigned [io 0x1450-0x145f]
[ 0.263798] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.263802] pci 0000:00:1e.0: bridge window [io 0x1000-0x1fff]
[ 0.263809] pci 0000:00:1e.0: bridge window [mem 0xfa900000-0xfa9fffff]
[ 0.263818] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.263822] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.263826] pci_bus 0000:03: resource 1 [mem 0xfaa00000-0xfeafffff]
[ 0.263829] pci_bus 0000:03: resource 2 [mem 0xbfe00000-0xdfefffff pref]
[ 0.263833] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.263837] pci_bus 0000:02: resource 1 [mem 0xbfc00000-0xbfcfffff]
[ 0.263840] pci_bus 0000:02: resource 2 [mem 0xbfd00000-0xbfdfffff 64bit pref]
[ 0.263844] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.263848] pci_bus 0000:01: resource 1 [mem 0xfa900000-0xfa9fffff]
[ 0.263851] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
[ 0.263855] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
[ 0.263916] NET: Registered protocol family 2
[ 0.264253] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.264286] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.264342] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.264384] TCP: reno registered
[ 0.264388] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.264404] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.264503] NET: Registered protocol family 1
[ 0.292116] pci 0000:03:00.0: Video device with shadowed ROM
[ 0.292131] PCI: CLS 32 bytes, default 64
[ 0.292211] Trying to unpack rootfs image as initramfs...
[ 0.859216] Freeing initrd memory: 19220K (f5a66000 - f6d2b000)
[ 0.859536] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 0.859632] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.859635] Scanning for low memory corruption every 60 seconds
[ 0.860103] Initialise system trusted keyring
[ 0.860181] audit: initializing netlink socket (disabled)
[ 0.860203] type=2000 audit(1424376955.860:1): initialized
[ 0.893774] bounce pool size: 64 pages
[ 0.893793] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.896069] zbud: loaded
[ 0.896181] VFS: Disk quotas dquot_6.5.2
[ 0.896258] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.897013] fuse init (API version 7.22)
[ 0.897141] msgmni has been set to 1718
[ 0.897240] Key type big_key registered
[ 0.897586] Key type asymmetric registered
[ 0.897589] Asymmetric key parser 'x509' registered
[ 0.897645] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.897681] io scheduler noop registered
[ 0.897684] io scheduler deadline registered (default)
[ 0.897730] io scheduler cfq registered
[ 0.898019] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.898080] pcieport 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.898169] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.898271] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.898298] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.898366] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.898368] vesafb: scrolling: redraw
[ 0.898372] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.898480] vesafb: framebuffer at 0xc0000000, mapped to 0xf8480000, using 1216k, total 1216k
[ 0.914910] Console: switching to colour frame buffer device 80x30
[ 0.931217] fb0: VESA VGA frame buffer device
[ 0.931250] intel_idle: does not run on family 6 model 13
[ 0.931261] ipmi message handler version 39.2
[ 0.931621] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.933292] ACPI: AC Adapter [AC0] (off-line)
[ 0.933399] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.933422] ACPI: Lid Switch [LID]
[ 0.933481] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.933487] ACPI: Sleep Button [SLPB]
[ 0.933547] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.933552] ACPI: Power Button [PWRB]
[ 0.933614] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.933618] ACPI: Power Button [PWRF]
[ 0.933704] tsc: Marking TSC unstable due to TSC halts in idle
[ 0.933716] ACPI: acpi_idle registered with cpuidle
[ 0.974206] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.974209] ACPI: Thermal Zone [THRM] (32 C)
[ 0.974263] GHES: HEST is not enabled!
[ 0.974377] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.976432] Linux agpgart interface v0.103
[ 0.978877] brd: module loaded
[ 0.980157] loop: module loaded
[ 0.980337] ata_piix 0000:00:1f.1: version 2.13
[ 0.981982] isapnp: Scanning for PnP cards...
[ 1.030911] scsi0 : ata_piix
[ 1.031001] scsi1 : ata_piix
[ 1.031054] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.031057] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.031687] libphy: Fixed MDIO Bus: probed
[ 1.031861] tun: Universal TUN/TAP device driver, 1.6
[ 1.031863] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.031916] PPP generic driver version 2.4.2
[ 1.031982] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.031988] ehci-pci: EHCI PCI platform driver
[ 1.032123] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.032133] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.032150] ehci-pci 0000:00:1d.7: debug port 1
[ 1.036054] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.123299] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfebffc00
[ 1.166743] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.264812] ata1.00: ATAPI: HL-DT-ST DVD-RW GWA-4082N, CW02, max UDMA/33
[ 1.308489] isapnp: No Plug & Play device found
[ 1.308583] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.308587] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.308590] usb usb1: Product: EHCI Host Controller
[ 1.308594] usb usb1: Manufacturer: Linux 3.13.0-45-generic ehci_hcd
[ 1.308597] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.308748] hub 1-0:1.0: USB hub found
[ 1.308760] hub 1-0:1.0: 8 ports detected
[ 1.309028] ehci-platform: EHCI generic platform driver
[ 1.309041] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.309044] ohci-pci: OHCI PCI platform driver
[ 1.309059] ohci-platform: OHCI generic platform driver
[ 1.309070] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.309168] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.309176] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.309201] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e480
[ 1.309263] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.309267] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.309270] usb usb2: Product: UHCI Host Controller
[ 1.309273] usb usb2: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[ 1.309277] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.309409] hub 2-0:1.0: USB hub found
[ 1.309421] hub 2-0:1.0: 2 ports detected
[ 1.309621] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.309629] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.309667] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
[ 1.309727] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.309731] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.309734] usb usb3: Product: UHCI Host Controller
[ 1.309738] usb usb3: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[ 1.309741] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.309879] hub 3-0:1.0: USB hub found
[ 1.309889] hub 3-0:1.0: 2 ports detected
[ 1.310081] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.310092] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.310130] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e880
[ 1.310191] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.310195] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.310198] usb usb4: Product: UHCI Host Controller
[ 1.310201] usb usb4: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[ 1.310204] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.310335] hub 4-0:1.0: USB hub found
[ 1.310346] hub 4-0:1.0: 2 ports detected
[ 1.310550] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.310557] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.310594] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ec00
[ 1.310654] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.310658] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.310661] usb usb5: Product: UHCI Host Controller
[ 1.310664] usb usb5: Manufacturer: Linux 3.13.0-45-generic uhci_hcd
[ 1.310668] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.310796] hub 5-0:1.0: USB hub found
[ 1.310806] hub 5-0:1.0: 2 ports detected
[ 1.311024] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.316225] i8042: Detected active multiplexing controller, rev 1.0
[ 1.317117] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.317122] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.317126] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.317129] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.317132] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.317220] mousedev: PS/2 mouse device common for all mice
[ 1.317576] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.317603] rtc_cmos 00:02: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.317722] device-mapper: uevent: version 1.0.3
[ 1.317814] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.317848] platform eisa.0: Probing EISA bus 0
[ 1.317856] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.317882] platform eisa.0: EISA: Detected 0 cards
[ 1.317891] cpufreq-nforce2: No nForce2 chipset.
[ 1.317895] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.318107] TCP: cubic registered
[ 1.318275] NET: Registered protocol family 10
[ 1.318587] NET: Registered protocol family 17
[ 1.318608] Key type dns_resolver registered
[ 1.318821] Using IPI No-Shortcut mode
[ 1.318929] Loading compiled-in X.509 certificates
[ 1.325010] Loaded X.509 cert 'Magrathea: Glacier signing key: 3689bf48af502cbafe71e5c25d6c55340b7f13ff'
[ 1.325029] registered taskstats version 1
[ 1.327989] Key type trusted registered
[ 1.330416] Key type encrypted registered
[ 1.334662] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.334673] ACPI: Battery Slot [BAT0] (battery present)
[ 1.334908] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.334913] IMA: No TPM chip found, activating TPM-bypass!
[ 1.335185] regulator-dummy: disabling
[ 1.335250] Magic number: 3:245:296
[ 1.335302] tty tty29: hash matches
[ 1.335366] rtc_cmos 00:02: setting system clock to 2015-02-19 20:15:56 UTC (1424376956)
[ 1.335647] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.335652] EDD information not available.
[ 1.335737] PM: Hibernation image not present or could not be loaded.
[ 1.335969] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.336303] ata1.00: configured for UDMA/33
[ 1.453597] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-RW GWA-4082N CW02 PQ: 0 ANSI: 5
[ 1.562957] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.562965] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.563234] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.563479] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.564339] Freeing unused kernel memory: 876K (c19bb000 - c1a96000)
[ 1.564456] Write protecting the kernel text: 6552k
[ 1.564674] Write protecting the kernel read-only data: 2768k
[ 1.564678] NX-protecting the kernel data: 5736k
[ 1.600344] systemd-udevd[95]: starting version 204
[ 1.970446] sata_via 0000:01:07.0: version 2.6
[ 1.970671] sata_via 0000:01:07.0: routed to hard irq line 10
[ 1.985370] scsi2 : sata_via
[ 1.988047] scsi3 : sata_via
[ 1.990379] scsi4 : sata_via
[ 1.995473] ata3: SATA max UDMA/133 port i16@0x1420 bmdma 0x1400 irq 16
[ 1.995482] ata4: SATA max UDMA/133 port i16@0x1430 bmdma 0x1408 irq 16
[ 1.995488] ata5: PATA max UDMA/133 port i16@0x1440 bmdma 0x1410 irq 16
[ 2.068108] firewire_ohci 0000:01:04.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[ 2.068475] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.068661] r8169 0000:01:05.0 (unregistered net_device): not PCI Express
[ 2.069230] r8169 0000:01:05.0 eth0: RTL8169sb/8110sb at 0xf845ac00, 00:03:0d:36:de:c7, XID 10000000 IRQ 19
[ 2.069240] r8169 0000:01:05.0 eth0: jumbo features [frames: 7152 bytes, tx checksumming: ok]
[ 2.316212] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.324689] ata3.00: ATA-7: ST96812AS, 3.03, max UDMA/133
[ 2.324698] ata3.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.332709] ata3.00: configured for UDMA/133
[ 2.332994] scsi 2:0:0:0: Direct-Access ATA ST96812AS 3.03 PQ: 0 ANSI: 5
[ 2.333465] sd 2:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.333613] sd 2:0:0:0: [sda] Write Protect is off
[ 2.333622] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.333689] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.334304] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.354217] sda: sda1 sda2 < sda5 >
[ 2.354989] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.568323] firewire_core 0000:01:04.0: created device fw0: GUID 00030d4971e33099, S400
[ 2.652153] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 2.660681] ata4.00: ATA-7: ST96812AS, 3.03, max UDMA/133
[ 2.660690] ata4.00: 117210240 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.668682] ata4.00: configured for UDMA/133
[ 2.668921] scsi 3:0:0:0: Direct-Access ATA ST96812AS 3.03 PQ: 0 ANSI: 5
[ 2.669560] sd 3:0:0:0: [sdb] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB)
[ 2.669711] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.669720] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.669785] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.670633] sd 3:0:0:0: Attached scsi generic sg2 type 0
[ 2.688397] sdb: sdb1 sdb2 < sdb5 >
[ 2.689369] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.720170] psmouse serio2: synaptics: Touchpad model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a/0x0, board id: 3655, fw id: 40930
[ 2.762071] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input14
[ 3.434662] random: nonblocking pool is initialized
[ 3.688308] bio: create slab <bio-1> at 1
[ 3.924226] bio: create slab <bio-2> at 2
[ 8.297826] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
[ 22.141085] Adding 2097148k swap on /dev/mapper/xubuntu--vg-swap_1. Priority:-1 extents:1 across:2097148k FS
[ 22.179267] EXT4-fs (dm-4): re-mounted. Opts: errors=remount-ro
[ 22.583485] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 23.052598] EXT4-fs (dm-1): mounting ext2 file system using the ext4 subsystem
[ 23.081685] systemd-udevd[501]: starting version 204
[ 23.329605] EXT4-fs (dm-1): mounted filesystem without journal. Opts: (null)
[ 23.514835] lp: driver loaded but no devices found
[ 23.607874] ppdev: user-space parallel port driver
[ 25.544241] Bluetooth: Core ver 2.17
[ 25.544302] NET: Registered protocol family 31
[ 25.544308] Bluetooth: HCI device and connection manager initialized
[ 25.544325] Bluetooth: HCI socket layer initialized
[ 25.544334] Bluetooth: L2CAP socket layer initialized
[ 25.544346] Bluetooth: SCO socket layer initialized
[ 25.546950] ACPI: Video Device [PEG] (multi-head: yes rom: no post: no)
[ 25.548345] type=1400 audit(1424376980.709:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=670 comm="apparmor_parser"
[ 25.548364] type=1400 audit(1424376980.709:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=670 comm="apparmor_parser"
[ 25.550124] type=1400 audit(1424376980.709:4): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=670 comm="apparmor_parser"
[ 25.552257] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/LNXVIDEO:00/input/input17
[ 25.555309] cfg80211: Calling CRDA to update world regulatory domain
[ 25.706082] Bluetooth: RFCOMM TTY layer initialized
[ 25.706106] Bluetooth: RFCOMM socket layer initialized
[ 25.706119] Bluetooth: RFCOMM ver 1.11
[ 25.825232] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 25.825242] Bluetooth: BNEP filters: protocol multicast
[ 25.825263] Bluetooth: BNEP socket layer initialized
[ 25.890120] type=1400 audit(1424376981.049:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=703 comm="apparmor_parser"
[ 25.890144] type=1400 audit(1424376981.049:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=703 comm="apparmor_parser"
[ 25.890161] type=1400 audit(1424376981.049:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=703 comm="apparmor_parser"
[ 25.891879] type=1400 audit(1424376981.049:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=703 comm="apparmor_parser"
[ 25.891899] type=1400 audit(1424376981.049:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=703 comm="apparmor_parser"
[ 25.911407] type=1400 audit(1424376981.069:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=703 comm="apparmor_parser"
[ 25.998390] wmi: Mapper loaded
[ 26.287977] intel_rng: FWH not detected
[ 26.519389] lib80211: common routines for IEEE802.11 drivers
[ 26.519400] lib80211_crypt: registered algorithm 'NULL'
[ 26.661390] libipw: 802.11 data/management/control stack, git-1.1.13
[ 26.661400] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[ 26.690600] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \PMRG 1 (20131115/utaddress-251)
[ 26.690619] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 26.690765] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 27.023545] type=1400 audit(1424376982.181:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=740 comm="apparmor_parser"
[ 27.078628] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 27.078638] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 27.078967] ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
[ 27.143376] [drm] Initialized drm 1.1.0 20060810
[ 27.272629] device-mapper: multipath: version 1.6.0 loaded
[ 28.474729] checking generic (c0000000 130000) vs hw (c0000000 10000000)
[ 28.474739] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 28.474831] Console: switching to colour dummy device 80x25
[ 28.493909] [drm] hdmi device not found 3 0 1
[ 28.494143] nouveau [ DEVICE][0000:03:00.0] BOOT0 : 0x042800a1
[ 28.494151] nouveau [ DEVICE][0000:03:00.0] Chipset: NV42 (NV42)
[ 28.494158] nouveau [ DEVICE][0000:03:00.0] Family : NV40
[ 28.561818] nouveau [ VBIOS][0000:03:00.0] checking PRAMIN for image...
[ 28.662578] nouveau [ VBIOS][0000:03:00.0] ... appears to be valid
[ 28.662586] nouveau [ VBIOS][0000:03:00.0] using image from PRAMIN
[ 28.662979] nouveau [ VBIOS][0000:03:00.0] BIT signature found
[ 28.662989] nouveau [ VBIOS][0000:03:00.0] version 05.41.02.39.49
[ 28.708281] nouveau 0000:03:00.0: irq 42 for MSI/MSI-X
[ 28.708310] nouveau [ PMC][0000:03:00.0] MSI interrupts enabled
[ 28.708369] nouveau [ PFB][0000:03:00.0] RAM type: DDR1
[ 28.708376] nouveau [ PFB][0000:03:00.0] RAM size: 256 MiB
[ 28.708382] nouveau [ PFB][0000:03:00.0] ZCOMP: 189440 tags
[ 28.721183] ipw2200: Detected geography ZZR (14 802.11bg channels, 0 802.11a channels)
[ 29.742640] init: failsafe main process (821) killed by TERM signal
[ 29.986132] 2-004c supply vcc not found, using dummy regulator
[ 30.052760] nouveau [ PTHERM][0000:03:00.0] Found an adm1032 at address 0x4c (controlled by lm_sensors, temp offset +0 C)
[ 30.052774] nouveau [ I2C][0000:03:00.0] detected monitoring device: adm1032
[ 30.201403] nouveau [ PTHERM][0000:03:00.0] FAN control: none / external
[ 30.201436] nouveau [ PTHERM][0000:03:00.0] fan management: automatic
[ 30.201445] nouveau [ PTHERM][0000:03:00.0] internal sensor: no
[ 30.201469] nouveau [ CLK][0000:03:00.0] 20: core 100 MHz shader 100 MHz memory 220 MHz
[ 30.201482] nouveau [ CLK][0000:03:00.0] 21: core 200 MHz shader 200 MHz memory 400 MHz
[ 30.201494] nouveau [ CLK][0000:03:00.0] 22: core 325 MHz shader 325 MHz memory 600 MHz
[ 30.201513] nouveau [ CLK][0000:03:00.0] --: core 200 MHz shader 200 MHz memory 401 MHz
[ 30.222696] [TTM] Zone kernel: Available graphics memory: 440294 kiB
[ 30.222706] [TTM] Zone highmem: Available graphics memory: 1032074 kiB
[ 30.222711] [TTM] Initializing pool allocator
[ 30.222725] [TTM] Initializing DMA pool allocator
[ 30.223732] nouveau [ DRM] VRAM: 251 MiB
[ 30.223742] nouveau [ DRM] GART: 512 MiB
[ 30.223754] nouveau [ DRM] TMDS table version 1.1
[ 30.223760] nouveau [ DRM] DCB version 3.0
[ 30.223769] nouveau [ DRM] DCB outp 00: 01000300 00000023
[ 30.223777] nouveau [ DRM] DCB outp 01: 03015323 00000004
[ 30.223784] nouveau [ DRM] DCB outp 02: 04024312 00000000
[ 30.223791] nouveau [ DRM] DCB outp 03: 020313f1 0084c080
[ 30.223797] nouveau [ DRM] DCB conn 00: 0000
[ 30.223805] nouveau [ DRM] DCB conn 01: 0110
[ 30.223811] nouveau [ DRM] DCB conn 02: 0111
[ 30.223817] nouveau [ DRM] DCB conn 03: 0113
[ 30.223823] nouveau [ DRM] DCB conn 04: 0230
[ 30.223829] nouveau [ DRM] DCB conn 05: 0340
[ 30.223840] nouveau W[ DRM] Pointer to flat panel table invalid
[ 30.277793] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 30.277803] [drm] No driver support for vblank timestamp query.
[ 30.277816] nouveau [ DRM] 0xD0F4: Parsing digital output script table
[ 30.547171] nouveau [ DRM] MM: using M2MF for buffer copies
[ 30.547195] nouveau [ DRM] Calling LVDS script 6:
[ 30.547202] nouveau [ DRM] 0xCE3E: Parsing digital output script table
[ 30.825052] nouveau [ DRM] Setting dpms mode 3 on TV encoder (output 3)
[ 31.141284] nouveau [ DRM] allocated 1440x900 fb: 0x9000, bo f2c88000
[ 31.150575] fbcon: nouveaufb (fb0) is primary device
[ 31.258822] type=1400 audit(1424376986.417:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=994 comm="apparmor_parser"
[ 31.258839] type=1400 audit(1424376986.417:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=994 comm="apparmor_parser"
[ 31.259901] type=1400 audit(1424376986.417:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=994 comm="apparmor_parser"
[ 31.277505] cfg80211: World regulatory domain updated:
[ 31.277507] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 31.277512] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 31.277515] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 31.277519] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 31.277522] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 31.277525] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 31.309302] type=1400 audit(1424376986.469:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=996 comm="apparmor_parser"
[ 31.309320] type=1400 audit(1424376986.469:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=996 comm="apparmor_parser"
[ 31.309334] type=1400 audit(1424376986.469:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=996 comm="apparmor_parser"
[ 31.311046] type=1400 audit(1424376986.469:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=996 comm="apparmor_parser"
[ 31.311059] type=1400 audit(1424376986.469:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=996 comm="apparmor_parser"
[ 31.311939] type=1400 audit(1424376986.469:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=996 comm="apparmor_parser"
[ 31.333073] nouveau [ DRM] Calling LVDS script 2:
[ 31.333079] nouveau [ DRM] 0xCEB5: Parsing digital output script table
[ 31.448234] nouveau [ DRM] Calling LVDS script 5:
[ 31.448238] nouveau [ DRM] 0xCE1A: Parsing digital output script table
[ 31.733756] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 31.759609] gpio_ich: ACPI BAR is unavailable, GPI 0 - 15 unavailable
[ 31.772832] gpio_ich: GPIO from 206 to 255 on gpio_ich
[ 31.817589] type=1400 audit(1424376986.977:21): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=997 comm="apparmor_parser"
[ 31.912541] Console: switching to colour frame buffer device 180x56
[ 31.914973] nouveau 0000:03:00.0: fb0: nouveaufb frame buffer device
[ 31.914981] nouveau 0000:03:00.0: registered panic notifier
[ 31.932869] [drm] Initialized nouveau 1.1.2 20120801 for 0000:03:00.0 on minor 0
[ 32.319671] autoconfig: line_outs=1 (0x15/0x0/0x0/0x0/0x0) type:speaker
[ 32.319682] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 32.319688] hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 32.319692] mono: mono_out=0x0
[ 32.319695] inputs:
[ 32.319701] Mic=0x19
[ 32.319704] dig-in=0x1f
[ 32.319710] realtek: No valid SSID, checking pincfg 0x411111f0 for NID 0x1d
[ 32.319714] realtek: Enable default setup for auto mode as fallback
[ 34.216553] r8169 0000:01:05.0 eth0: link down
[ 34.216616] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.217851] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.308590] lib80211_crypt: registered algorithm 'CCMP'
[ 35.353427] lib80211_crypt: registered algorithm 'TKIP'
[ 35.577897] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 35.578192] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 36.172405] systemd-udevd[529]: conflicting device node '/dev/mapper/via_jigbaahcd2' found, link to '/dev/dm-2' will not be created
[ 36.180743] systemd-udevd[532]: conflicting device node '/dev/mapper/via_jigbaahcd5' found, link to '/dev/dm-3' will not be created
[ 38.411994] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 46.472686] init: plymouth-upstart-bridge main process ended, respawning
[ 46.521392] init: plymouth-upstart-bridge main process (1443) terminated with status 1
[ 46.521433] init: plymouth-upstart-bridge main process ended, respawning
[ 52.010239] init: anacron main process (1312) killed by TERM signal
[ 1142.757083] perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000

Dold text