Allt från Computex 2023

Fråga ang. hur man kopplar modulärt nätagg (Corsair RM750X)

Permalänk
Medlem

Fråga ang. hur man kopplar modulärt nätagg (Corsair RM750X)

Yo! Snabb grej bara. Jag har inte haft något modulärt aggregat tidigare och 24 pins atx kabeln ska kopplas in i moderkortet. Ena sidan av kabeln har 24 pins och den andra 18 pin+en mindre connector med 8 pin. Ska både 18 pin+8 pin kopplas in i PSU:n?

Är ju ganska säker på att det ska vara så men är lite nojig när det gäller sånt här

Permalänk
Avstängd

Ja, eller tvärtom. Fungerar vilket som.

Visa signatur

lolclockers

Permalänk
Medlem

@vulkott: Ja, båda ska kopplas in.

Permalänk
Medlem

http://www.tomshardware.com/reviews/corsair-rm750x-power-supp...

"A very interesting feature of the RMx units comes in the modular cables they use, which are similar to those of the RMi models and which Corsair describes as Type 4 cables. Polymer capacitors are installed on the +12V, 5V and 3.3V wires of the ATX cable and on the +12V wires of the EPS and PCIe cables, providing extra ripple filtering. On top of that, the ATX cable plugs into the PSU's modular interface through 28 pins instead of the usual 24 pins, with the extra four pins acting as sense wires. The use of sense wires allows for a very tight load regulation, Corsair claims, which is a key performance feature for any high-end PSU."

Säker på att det är 18+8?

Permalänk
Medlem

@Frisell Näe 18+10 skulle jag ju skriva, så 28!

Tack för svar alla, då kan man vara säker