Forum Övrigt Nyhetskommentarer Annonskommentarer Tråd

12th Gen Delid Tool and Thermal Grizzly Mounting Kit

1
Skriv svar
Permalänk
Proffsmoddare
●

12th Gen Delid Tool and Thermal Grizzly Mounting Kit

Hello.

I am looking for a delid tool for my 12th gen Intel i9 12900ks CPU.

I am also looking for a Thermal Grizzly Mounting kit for 12th gen Intel as well.

Does anyone here have a Rockit Delid kit (and hopefully also the copper IHS) that they could rent to me, or preferably sell?

Name your price in the thread or in PM.

Kind regards,
Justin

Läs hela annonsen här

Visa signatur

https://facebook.com/metallicacidcustomspcs
https://youtube.com/metallicacidcustoms
https://instagram.com/metallicacidcustoms

Redigera
Citera flera Citera
Permalänk
Medlem
●

i have also been looking fore these used but no one is selling it !

https://www.thermal-grizzly.com/produkte/522-cpu-contact-fram...

i only have the 3d printed one for all the lga 115x cpus

Visa signatur

MSI Z490 A-Pro | Intel i5-10600KF AllCore 5.1ghz | MSI 1660 Ti Gaming X
Corsair TX650W | Fractal D Meshify S2 | HyperX 3600CL17 @ 3800cl17
Kingston A2000 256gb| | 3+2Tb HDD | 27" Samsung S27F350 75hz | 24" ACER G246HYL 65hz
EK block+pump/res x3 150ml, 360+240;45mm rads, 19/15mm fittings| Logitech- G213, G502, G933, x530 | Mionix deskpad 1200x800 4XL

Redigera
Citera flera Citera
Permalänk
Medlem ★
●

The Thermal Grizzly contact frame is in stock here: https://www.ebay.de/itm/265686144552?epid=11053909481&hash=it.... I bought mine from there and it arrived within 4 working days.

Redigera
Citera flera Citera
Permalänk
Proffsmoddare
●
Skrivet av megamats:

The Thermal Grizzly contact frame is in stock here: https://www.ebay.de/itm/265686144552?epid=11053909481&hash=it.... I bought mine from there and it arrived within 4 working days.

Gå till inlägget

Thank you so much for the link! It has been sold out everywhere, but thanks to your help, I have now made an order on the bracket

Visa signatur

https://facebook.com/metallicacidcustomspcs
https://youtube.com/metallicacidcustoms
https://instagram.com/metallicacidcustoms

Redigera
Citera flera Citera
Permalänk
Medlem
●

did you not find it here ?
https://www.dustinhome.se/product/5011293364/intel-12th-gen-c...

Visa signatur

MSI Z490 A-Pro | Intel i5-10600KF AllCore 5.1ghz | MSI 1660 Ti Gaming X
Corsair TX650W | Fractal D Meshify S2 | HyperX 3600CL17 @ 3800cl17
Kingston A2000 256gb| | 3+2Tb HDD | 27" Samsung S27F350 75hz | 24" ACER G246HYL 65hz
EK block+pump/res x3 150ml, 360+240;45mm rads, 19/15mm fittings| Logitech- G213, G502, G933, x530 | Mionix deskpad 1200x800 4XL

Redigera
Citera flera Citera
Permalänk
Proffsmoddare
●

Yes, I did. Dustin, including all other retailers in Sweden and other parts of Europe (caseking, highflow, aquatuning, Proshop etc.) didnt have it in stock or was a beställningsvara.

I have a time-crunch here, and I need it ASAP. I didn't have the luxury to purchase it and wait an unknown amount of time for it to ship and arrive

But thank you for flagging it at Dustin. If the results are any good then I want to pick one up for myself.

Visa signatur

https://facebook.com/metallicacidcustomspcs
https://youtube.com/metallicacidcustoms
https://instagram.com/metallicacidcustoms

Redigera
Citera flera Citera
Permalänk
Medlem ★
●
Skrivet av MetallicAcid:

Yes, I did. Dustin, including all other retailers in Sweden and other parts of Europe (caseking, highflow, aquatuning, Proshop etc.) didnt have it in stock or was a beställningsvara.

I have a time-crunch here, and I need it ASAP. I didn't have the luxury to purchase it and wait an unknown amount of time for it to ship and arrive

But thank you for flagging it at Dustin. If the results are any good then I want to pick one up for myself.

Gå till inlägget

I don't want to derail the comment section too much here, but just a small tip before mounting the correction frame is to have a look at Gamers Nexus' video about the Alder Lake bending issue, more specifically how they mount the frame.

In order to get the mounting pressure as even as possible, it's vital to first rotate the screw counterclockwise to find the start of the thread before screwing it in. This should be done for all four screws to make sure you tighten them the same amount of degrees.

I have both Alphacool's Socket 1700 backplate and the TG Contact Frame installed in my system. I experienced a 2-4°C improvement across all cores (Prime95 AVX Small FFT) compared to just the Alphacool backplate and the 0,8 mm washer mod + stock Intel ILM.

Redigera
Citera flera Citera
Permalänk
Proffsmoddare
●
Skrivet av megamats:

I don't want to derail the comment section too much here, but just a small tip before mounting the correction frame is to have a look at Gamers Nexus' video about the Alder Lake bending issue, more specifically how they mount the frame.

In order to get the mounting pressure as even as possible, it's vital to first rotate the screw counterclockwise to find the start of the thread before screwing it in. This should be done for all four screws to make sure you tighten them the same amount of degrees.

I have both Alphacool's Socket 1700 backplate and the TG Contact Frame installed in my system. I experienced a 2-4°C improvement across all cores (Prime95 AVX Small FFT) compared to just the Alphacool backplate and the 0,8 mm washer mod + stock Intel ILM.

Gå till inlägget

Thanks for the tip. I have already watched the video, and also own a torque screwdriver to mount the plate to the spec.

Visa signatur

https://facebook.com/metallicacidcustomspcs
https://youtube.com/metallicacidcustoms
https://instagram.com/metallicacidcustoms

Redigera
Citera flera Citera
Permalänk
Medlem
●
Skrivet av MetallicAcid:

Yes, I did. Dustin, including all other retailers in Sweden and other parts of Europe (caseking, highflow, aquatuning, Proshop etc.) didnt have it in stock or was a beställningsvara.

I have a time-crunch here, and I need it ASAP. I didn't have the luxury to purchase it and wait an unknown amount of time for it to ship and arrive

But thank you for flagging it at Dustin. If the results are any good then I want to pick one up for myself.

Gå till inlägget

looks like we both looked at the same pages for this frame !
i were unable to tell if it were out of stock or not over at dustin tho .. pls leave a post about the resoults later if you dont mind. as i am gona do a eva 1 build and gona delid and test the 12900k and later the 13900k when it drops on to the market

Visa signatur

MSI Z490 A-Pro | Intel i5-10600KF AllCore 5.1ghz | MSI 1660 Ti Gaming X
Corsair TX650W | Fractal D Meshify S2 | HyperX 3600CL17 @ 3800cl17
Kingston A2000 256gb| | 3+2Tb HDD | 27" Samsung S27F350 75hz | 24" ACER G246HYL 65hz
EK block+pump/res x3 150ml, 360+240;45mm rads, 19/15mm fittings| Logitech- G213, G502, G933, x530 | Mionix deskpad 1200x800 4XL

Redigera
Citera flera Citera
Permalänk
Medlem
●

as of right now it is in stock here if you are still looking for it

https://www.proshop.se/CPU-flaektar/Thermal-Grizzly-CPU-Conta...

Redigera
Citera flera Citera
Permalänk
Proffsmoddare
●
Skrivet av Gorgi15:

as of right now it is in stock here if you are still looking for it

https://www.proshop.se/CPU-flaektar/Thermal-Grizzly-CPU-Conta...

Gå till inlägget

Thank you so much for the tip!

I ended up getting a bracket from Ebay Germany brand new a few weeks ago though

Visa signatur

https://facebook.com/metallicacidcustomspcs
https://youtube.com/metallicacidcustoms
https://instagram.com/metallicacidcustoms

Redigera
Citera flera Citera
Permalänk
Proffsmoddare
●

Annonsen är avslutad

Visa signatur

https://facebook.com/metallicacidcustomspcs
https://youtube.com/metallicacidcustoms
https://instagram.com/metallicacidcustoms

Redigera
Citera flera Citera
1
Skriv svar
Senaste nyheterna
Hårdvara
Mjukvara
Övrigt
Nytt i forumet
Datorkomponenter
System
Ljud, bild och kommunikation
Spel och mjukvara