Permalänk

Hjälp-.-....UNMOUNTABLE_BOOT_VOLUME

Nu är det så att jag tryckte in en ny HHD i min Dator Dan efter då starade den inte får fel .
"STOP 0x000000ED (0x aaaaaaaa ,0x bbbbbbbb ,0x cccccccc ,0x dddddddd ) UNMOUNTABLE_BOOT_VOLUME"
Det ända jag undra om nån har haft det felet nån gång och vad dom har gjort då.?
På Microsoft Hemsida står det att det felet kommer under uppgradering av Win XP. Det har inte ens jag gjort ...nån som har haft det felet och vad har dom gjort för att åtgärda det?

MVH//Dempe

Permalänk
Medlem

Testa låta disken sitta ensam. Kan vara ett kompatibelt problem. Dvs, låt den var aensam master/slave

Visa signatur

[Dator]: Asus-N56VM-S4034V ¤ [SSD] Intel-520-Series-240GB ¤ [Youtube - Fys]: ¤ Rygg & Bröst ¤ Mage & Triceps
[Graveringar]: ¤ Angel ¤ Devil + Tribal ¤ Dragon ¤
[Recensioner]: ¤ 3R System R201 ¤ Acousticase ¤ Colorsit ATX8010-A43 ¤ Lian Li PC7 SE ¤ Ultra X-Connect 500W ¤

Permalänk
Citat:

Ursprungligen inskrivet av Frantic
Testa låta disken sitta ensam. Kan vara ett kompatibelt problem. Dvs, låt den var aensam master/slave

Prövade med det igår..Står På Microsoft hemsida att man ska gå in i återställningkonsolen .men vad är de? . Jag kommer ingestans .

Permalänk
Medlem

Vad har du för system i övrigt?

Visa signatur

[Dator]: Asus-N56VM-S4034V ¤ [SSD] Intel-520-Series-240GB ¤ [Youtube - Fys]: ¤ Rygg & Bröst ¤ Mage & Triceps
[Graveringar]: ¤ Angel ¤ Devil + Tribal ¤ Dragon ¤
[Recensioner]: ¤ 3R System R201 ¤ Acousticase ¤ Colorsit ATX8010-A43 ¤ Lian Li PC7 SE ¤ Ultra X-Connect 500W ¤

Permalänk
Citat:

Ursprungligen inskrivet av Frantic
Vad har du för system i övrigt?

AMD Athlon 3100+ Sempron 1,8 Ghz
256 Mb Ram
Intergerat 64 MB Grafikort
80 GB HHD + 40 GB båda två Samsung SpinPoint
Windows XP.

Nåt mer...

Permalänk
Avstängd

se:

http://support.microsoft.com/default.aspx?scid=kb;en-us;29718...

""STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME" Error Message When You Restart Your Computer or Upgrade to Windows XP"

vilket i korthet lyder:
"CAUSE
This behavior can occur if either of the following conditions is true: • Your computer uses an Ultra Direct Memory Access (UDMA) hard disk controller, and the following conditions are true: • You use a standard 40-wire connector cable to connect the UDMA drive to the controller instead of the required 80-wire, 40-pin cable.
• The basic input/output system (BIOS) settings are configured to force the faster UDMA modes.

• The file system is damaged and cannot be mounted.

RESOLUTION
To resolve this behavior, use the appropriate method.
UDMA Controller
If your computer uses a UDMA hard disk controller, use the following procedures:
• Replace the 40-wire cable with an 80-wire UDMA cable.
• In the BIOS settings for your computer, load the 'Fail-Safe' default settings, and then reactivate the most frequently used options such as USB Support. "

+ lite till!

Eller kolla in: http://support.microsoft.com/default.aspx?scid=kb;en-us;31540...

Eller: http://support.microsoft.com/default.aspx?scid=kb;en-us;89200...

Lycka till!

Permalänk
Citat:

Ursprungligen inskrivet av Teks
se:

http://support.microsoft.com/default.aspx?scid=kb;en-us;29718...

""STOP 0x000000ED UNMOUNTABLE_BOOT_VOLUME" Error Message When You Restart Your Computer or Upgrade to Windows XP"

vilket i korthet lyder:
"CAUSE
This behavior can occur if either of the following conditions is true: • Your computer uses an Ultra Direct Memory Access (UDMA) hard disk controller, and the following conditions are true: • You use a standard 40-wire connector cable to connect the UDMA drive to the controller instead of the required 80-wire, 40-pin cable.
• The basic input/output system (BIOS) settings are configured to force the faster UDMA modes.

• The file system is damaged and cannot be mounted.

RESOLUTION
To resolve this behavior, use the appropriate method.
UDMA Controller
If your computer uses a UDMA hard disk controller, use the following procedures:
• Replace the 40-wire cable with an 80-wire UDMA cable.
• In the BIOS settings for your computer, load the 'Fail-Safe' default settings, and then reactivate the most frequently used options such as USB Support. "

+ lite till!

Eller kolla in: http://support.microsoft.com/default.aspx?scid=kb;en-us;31540...

Eller: http://support.microsoft.com/default.aspx?scid=kb;en-us;89200...

Lycka till!

Tack ...Hittade in på den sidan oxå... Får hoppas på att Det är fel på Filsystemet och inte nån Hårdvara ,. Men tänkte ändå fråga om nån har haft samma problem nån gång?

Permalänk
Medlem

Jag har haft samma fel, i mitt fall berodde det på att en hårddisk (inte den med windows på utan en helt annan) var paj, när jag kopplade ur den så fungerade det som det skulle...

/KOssan

Permalänk

Fixat

Nu har jag fixat det...Fick byta Från Slave=Master och boota med Xpskivan därifrån. Sen fungerade det super.. illafall Tack alla som jag Info om det...