Visa signatur
Antec P180, Neopower480 IntelD865PERL 3.20E@3333MHz, 2GB HyperX (Dual), X850XT PE(AGP),Audigy 2 ZS, [Raptor,Seagate,Samsung HDD]Samsung 913N, 100mbit fiber
XP,ZoneAlarm,O&O Defrag,Gevalia
Saxat från Intels hemsida:
"Rules to Enable Dual Channel Mode
To achieve Dual Channel mode, the following conditions must be met:
Matched DIMM configuration in each channel
Same Density (128MB, 256MB, 512MB, etc.)
Same DRAM technology (128Mb, 256Mb, or 512Mb)
Same DRAM bus width (x8 or x16)
All either single-sided or dual-sided
Matched in both Channel A and Channel B memory channels
Populate symmetrical memory slots (Slot 0 or Slot 1)
Note: Configurations that do not match the above conditions will revert to Single Channel mode.
The following conditions do not need to be met:
Same brand
Same timing specifications
Same DDR speed "
Så nu hoppas jag all osäkerhet är över.
Antec P180, Neopower480 IntelD865PERL 3.20E@3333MHz, 2GB HyperX (Dual), X850XT PE(AGP),Audigy 2 ZS, [Raptor,Seagate,Samsung HDD]Samsung 913N, 100mbit fiber
XP,ZoneAlarm,O&O Defrag,Gevalia
Copyright © 1999–2024 Geeks AB. Allt innehåll tillhör Geeks AB.
Citering är tillåten om källan anges.