Opteron 170, Epox 9NDA3+ burn-in and OC help please

Permalänk
Medlem

Opteron 170, Epox 9NDA3+ burn-in and OC help please

Ursäkta min svengelska... lade ut detta på ett eng. forum o orkade inte skriva om det

I just got an Opteron 170 ( dont know wich stepping yet).
I would appreciate some help with how to do the burn-in process.
Wich max volt to use and so on.
Is it ok if i use the cpu for a while and do the burn-in later or should i do the burn-in at once directly after i installed it????

Right now i am using a Epox 9NDA3+ mobo, 4 x Corsair CMX512-3200C2, CM Stacker, Zalman CNPS9500, Xfx 6800GT + Zalman CNPS 700.
Cpu right now: 3500+ clawhammer@2.4Ghz.

I am thinking about getting new memories also... G.SKill F1-4000USU2-2GBHZ
Will those mems work with my other components??? And how much will i gain in performance if i change mems....

I will try to overclock the cpu as much as possible with the zalman 9500, aiming at 2.8Ghz 24/7, will that be possible???

Visa signatur

| CM Stacker | Asus P5K | Intel C2D E6600 @ 3.28GHz - 1.375 volt | 2 x OCZ Gold XTC DDR2 PC6400 4096MB KIT | Raptor WD1500ADFD | Leadtek Winfast 8800GTS TDH 640MB | Xfi- Platinum | Dell 3007WFP*HC lcd | Hiper 580w | Zalman CNPS9500 | Logitech Z-5450 |

Permalänk
Medlem

haha du och jag sitter i EXAKT samma sits m8
har hållit på att bränna in min prolle senaste två dygnen
jag följer den här ramen när jag gör:
* Stock settings for 6hrs (StressCPU)

* Bump net CPU Freq by 50 MHz for 1 hr (Edit*4 hrs) (CPUBurn with error checking off). If you computer crashes,back off by 20MHz.

* Check status for 30 min using StressCPU. If you find errors,bump voltage by 0.025 V and repeat step #2.

* Continue this process till you reach your Magic number/Target Freq (mine is 2.7GHz).

* Turn off error checking and use CPUBurn for > 14 hrs i.e overnight.

* Turn off computer, let it cool down and then use Stress CPU to check for errors. Let it run for the rest of the day. If you still see errors, you have not completed setps 1, 2 properly and have jumped the gun. Don't be hasty!

* Now decrease VCore in steps of 0.025 V and see if you get errors. The idea is to reduce the voltage threshold by this back and forth process.

gl hf

Visa signatur

Dfi Asus a8n32 | AMD Opteron 170 CCBWE 0550UPMW @ 2.8ghz, 1.425v | G.skill HZ black edition 2*1 gig pc4000 @ 560mhz 1:1| Leadtek 6800gt 256 mb | Seagate sata 160 gig, Seagate 3 * sata 300 gig, Western Digital raptor sata 36 gig, Western Digital 3 * sata 320 gig | Tagan 580watt easycon |

Permalänk
Medlem

bränna in? vad händer då?

Visa signatur

opteron 165+ @ 2,5 ghz tuniq, DFI lanparty d, 2x 1024 gskill pc4000. 7800Gtx 256 mb vf900, Hiper 580W psu blå, thermaltake armor,2 st raptor 36 gb

Permalänk
Medlem

Förhoppningsvis så ska man kunna sänka volten när man nåt optimal klockning, och därmed minska värmeutvecklingen och kanske kunna klocka lite till....

Vissa säger att det funkar och del att det bara är skitsnack... jag tänkte testa så snart jag hämtat ut min opteron på posten iaf .

STEPPING: CCBWE 0550UPMW

Samma som dig jhan.hz... hur går det för dig med inbränningen???

Visa signatur

| CM Stacker | Asus P5K | Intel C2D E6600 @ 3.28GHz - 1.375 volt | 2 x OCZ Gold XTC DDR2 PC6400 4096MB KIT | Raptor WD1500ADFD | Leadtek Winfast 8800GTS TDH 640MB | Xfi- Platinum | Dell 3007WFP*HC lcd | Hiper 580w | Zalman CNPS9500 | Logitech Z-5450 |

Permalänk
Medlem

hej patrik!
jodå det går bra faktiskt, har inte stött på ngra problem hittils, har hållit på med ibränningen i 3 dygn nu och ligger för tillfället på 2.55 ghz @ stock volt utan ngra som helst problem. Det är väldigt tidskrävande dock så det kmr nog ta ett tag till
Om du är sugen så kan jag beskriva lite mer utförligt hur JAG gjorde, men du kanske ska skita i det där med att bränna in, vet inte hur mkt det lönar sig..
peace

Visa signatur

Dfi Asus a8n32 | AMD Opteron 170 CCBWE 0550UPMW @ 2.8ghz, 1.425v | G.skill HZ black edition 2*1 gig pc4000 @ 560mhz 1:1| Leadtek 6800gt 256 mb | Seagate sata 160 gig, Seagate 3 * sata 300 gig, Western Digital raptor sata 36 gig, Western Digital 3 * sata 320 gig | Tagan 580watt easycon |

Permalänk
Medlem

Strange thing is i cant boot into win at 2.4Ghz not even if i raise V core.... should this cpu with that stepping do at least that??

I also thought my zalman cnps 9500 would cool the cpu much better1

Could it be that the NB is getting to hot, i cant read the temps on it and i am using a passive cooler???

Would it help if i re-install windows...

is there any drivers i should install for the opteron ?

2xPrime 95, vcore 1.232, 2.2Ghz full load, 57 degrees

Visa signatur

| CM Stacker | Asus P5K | Intel C2D E6600 @ 3.28GHz - 1.375 volt | 2 x OCZ Gold XTC DDR2 PC6400 4096MB KIT | Raptor WD1500ADFD | Leadtek Winfast 8800GTS TDH 640MB | Xfi- Platinum | Dell 3007WFP*HC lcd | Hiper 580w | Zalman CNPS9500 | Logitech Z-5450 |