jag får blue screen men jag tror jag hittat felet

Trädvy Permalänk
Medlem
Plats
Hallstavik
Registrerad
Jan 2007

jag får blue screen men jag tror jag hittat felet

som sagt när jag kör spel så får jag bluescreen det står machine_check_exception men jag fick ett förslag testa windows debugger tools jag körde det gjorde som han sa och jag fick detta:

MACHINE_CHECK_EXCEPTION (9c)
A fatal Machine Check Exception has occurred.
KeBugCheckEx parameters;
x86 Processors
If the processor has ONLY MCE feature available (For example Intel
Pentium), the parameters are:
1 - Low 32 bits of P5_MC_TYPE MSR
2 - Address of MCA_EXCEPTION structure
3 - High 32 bits of P5_MC_ADDR MSR
4 - Low 32 bits of P5_MC_ADDR MSR
If the processor also has MCA feature available (For example Intel
Pentium Pro), the parameters are:
1 - Bank number
2 - Address of MCA_EXCEPTION structure
3 - High 32 bits of MCi_STATUS MSR for the MCA bank that had the error
4 - Low 32 bits of MCi_STATUS MSR for the MCA bank that had the error
IA64 Processors
1 - Bugcheck Type
1 - MCA_ASSERT
2 - MCA_GET_STATEINFO
SAL returned an error for SAL_GET_STATEINFO while processing MCA.
3 - MCA_CLEAR_STATEINFO
SAL returned an error for SAL_CLEAR_STATEINFO while processing MCA.
4 - MCA_FATAL
FW reported a fatal MCA.
5 - MCA_NONFATAL
SAL reported a recoverable MCA and we don't support currently
support recovery or SAL generated an MCA and then couldn't
produce an error record.
0xB - INIT_ASSERT
0xC - INIT_GET_STATEINFO
SAL returned an error for SAL_GET_STATEINFO while processing INIT event.
0xD - INIT_CLEAR_STATEINFO
SAL returned an error for SAL_CLEAR_STATEINFO while processing INIT event.
0xE - INIT_FATAL
Not used.
2 - Address of log
3 - Size of log
4 - Error code in the case of x_GET_STATEINFO or x_CLEAR_STATEINFO
AMD64 Processors
1 - Bank number
2 - Address of MCA_EXCEPTION structure
3 - High 32 bits of MCi_STATUS MSR for the MCA bank that had the error
4 - Low 32 bits of MCi_STATUS MSR for the MCA bank that had the error
Arguments:
Arg1: 00000004
Arg2: 805460f0
Arg3: b2000010
Arg4: 00010c0f

Debugging Details:
------------------

NOTE: This is a hardware error. This error was reported by the CPU
via Interrupt 18. This analysis will provide more information about
the specific error. Please contact the manufacturer for additional
information about this error and troubleshooting assistance.

This error is documented in the following publication:

- Bios and Kernel Developers Guid for AMD Athlon(r) 64 and AMD Opteron(r) Processors
Bit Mask:

MA Model Specific MCA
O ID Other Information Error Code Error Code
VV SDP ___________|____________ _______|_______ _______|______
AEUECRC| | | |
LRCNVVC| | | |
^^^^^^^| | | |
6 5 4 3 2 1
3210987654321098765432109876543210987654321098765432109876543210
----------------------------------------------------------------
1011001000000000000000000001000000000000000000010000110000001111

VAL - MCi_STATUS register is valid
Indicates that the information contained within the IA32_MCi_STATUS
register is valid. When this flag is set, the processor follows the
rules given for the OVER flag in the IA32_MCi_STATUS register when
overwriting previously valid entries. The processor sets the VAL
flag and software is responsible for clearing it.

UC - Error Uncorrected
Indicates that the processor did not or was not able to correct the
error condition. When clear, this flag indicates that the processor
was able to correct the error condition.

EN - Error Enabled
Indicates that the error was enabled by the associated EEj bit of the
IA32_MCi_CTL register.

PCC - Processor Context Corrupt
Indicates that the state of the processor might have been corrupted
by the error condition detected and that reliable restarting of the
processor may not be possible.

BUSCONNERR - Bus and Interconnect Error BUS{LL}_{PP}_{RRRR}_{II}_{T}_err
These errors match the format 0000 1PPT RRRR IILL

Concatenated Error Code:
--------------------------
_VAL_UC_EN_PCC_BUSCONNERR_F

This error code can be reported back to the manufacturer.
They may be able to provide additional information based upon
this error. All questions regarding STOP 0x9C should be
directed to the hardware manufacturer.

BUGCHECK_STR: 0x9C_IA32_AuthenticAMD

CUSTOMER_CRASH_COUNT: 1

DEFAULT_BUCKET_ID: DRIVER_FAULT

PROCESS_NAME: steam.exe

LAST_CONTROL_TRANSFER: from 806d38d7 to 804f8a51

STACK_TEXT:
805460c8 806d38d7 0000009c 00000004 805460f0 nt!KeBugCheckEx+0x1b
WARNING: Stack unwind information not available. Following frames may be wrong.
805461f4 806cec2e 80042000 00000000 00000000 hal+0x58d7
00000000 00000000 00000000 00000000 00000000 hal+0xc2e

STACK_COMMAND: kb

SYMBOL_NAME: ANALYSIS_INCONCLUSIVE

FOLLOWUP_NAME: MachineOwner

MODULE_NAME: Unknown_Module

IMAGE_NAME: Unknown_Image

DEBUG_FLR_IMAGE_TIMESTAMP: 0

FAILURE_BUCKET_ID: 0x9C_IA32_AuthenticAMD_ANALYSIS_INCONCLUSIVE

BUCKET_ID: 0x9C_IA32_AuthenticAMD_ANALYSIS_INCONCLUSIVE

Followup: MachineOwner

så jag tror att det är min amd athlon 64 processor som gör bluescreenen stämmer det?

en uppdatering: jag har testat att byta processor men jag får ändå bluescrren så jag tror att det är nått med moderkortet.