Modifierade NF7-S BIOS'es [Arkiv]

Hej,

Här tänkte jag lägga upp ett litet arkiv för hämtning av modifierade BIOS'es som passar NF7-S-brädorna. Av anledning för allt fler mirrors/ställen börjar sakta men säkert försvinna..

Jag börjar med några stycken och sen får ni gärna hjälpa till och länka till fler så fler kan samlas på ett ställe!

En liten FAQ ang. dessa,

Q: Vad betyder 1T samt 2T och vilken ska jag använda?
A: Det är en typ av minneshastighet ungefär som 2-2-2-5-1T eller 2-2-2-5-2T. Generellt brukar man säga att man ska använda 1T om man har 2x256MB och 2T om du har 2x512MB eller högre.

Q: Varför ska man använda modifierade BIOS'es?
A: För att dessa generellt ger högre klockresultat

******************
T I C T A C B I O S E S
******************

D10 MANTARAYS-XT [1T (CPC ON)]

- CPU Disconnect function patch
- EXT P2P Discard time 1ms (to prevent SATA corruption)
- SBA Enabled by default
- New small ABIT logo
- New Full Screen boot up logo (Manta Rays XT Beta Test Logo)
- L12 Softmod for Tbred & Mobile to run on 166MHz Interface
- Beta 4x4 Ingredients : Included
- Command Per Clock : Enabled (D10 Stock BPL)
- Dimm Driving Strength & slew Rate : Stock D10
- Alpha Timing : Stock D10
- CPU Interface enable & Disable : Stock D10

HÄMTAS: http://psy.sh.nu/~madmax/nf7-s/ABIT-NF7D10-MantaRaysXT-1T.zip

****************************************

D10 Manta Rays-XT [2T (CPC OFF)]

- CPU Disconnect function patch
- EXT P2P Discard time 1ms (to prevent SATA corruption)
- SBA Enabled by default
- New small ABIT logo
- New Full Screen boot up logo (Manta Rays XT Logo) * Credit to HouseRat OcForums.com
- L12 Softmod for Tbred & Mobile to run on 166MHz Interface
- Beta 4x4 Ingredients : Included
- Command Per Clock : Disabled (D10 Stock V2.91 BPL + CPC Code by tictac)
- Dimm Driving Strength & Slew Rate : Stock D10
- Alpha Timing : Stock D10
- CPU Interface Enable & Disable : Stock D10

HÄMTAS: http://psy.sh.nu/~madmax/nf7-s/ABIT-NF7D10-MantaRaysXT-2T.zip

*****************************************

D22 ALPHA 1 [1T (CPC ON)]

- SIP Table of D10 Original
- SATA Bios Version 4247
- 1T Timing

HÄMTAS: http://psy.sh.nu/~madmax/nf7-s/ABIT-NF7D22-Alpha1-4247-1T.zip

******************************************

D23 3D Fire [1T (CPC ON)]

- Base on D23 bios structure
- ROMSIP Table Re-tune (Multiplier Working)
- Vcore Revised : 0.025V increasement
- Overclockers bios layout
- 3D Fire Ingredients
- SATA Bios Version 4247
- 1T Timing

HÄMTAS: http://psy.sh.nu/~madmax/nf7-s/ABIT-NF7D23-3DFire-4247-1T.zip

******************************************

D26 BLACK-MANTARAY [1T (CPC ON)]

1 . Changed the Disable and Enabled CPU Interface Table 133, 166 & 200 MHz FSB: (ABIT Stock ROMSIP Tweak by tictac)
- DISABLE CPU Interface : Unchanged
- ENABLED CPU Interface : Fix Unstable Timing in D26 SplitFire with 3D Application
2 . Vcore Revised same as D23 3D Fire R1 & R2
3 . Command Per Clock : Enable By Default (ABIT Stock V3.02 BPL)
4 . New Small ABIT Logo at Boot Up
5 . 3D Fire Ingredients : Included
6 . Bios Layout : Stock ABIT Bios
7 . CPU Disconnect Function Patch as Recomended by nVidia Tech
8 . Side Band Addressing : Enable by Default ( Depends on VGA Driver. It might overwrite the setting to Disable)
9 . Dimm Driving Stregth & Slew Rate : Stock ABIT Configuration
10. Alpha Memory Timing : Stock ABIT Configuration
11. Unknown Processor -> Renamed to AMD XP Mobile for Athlon Mobile User
12. New Full Screen Logo on BootUp( Press Tab to show POST screen , Press Delete to enter Bios)
13. Improve 3DMark2001SE & 3D Application stability at high FSB
14. SATA Bios Version 4247

HÄMTAS: http://psy.sh.nu/~madmax/nf7-s/D26-BlackMantaray-1T.zip

******************************************

D26 BLACK-MANTARAY [2T (CPC OFF)]

1 . Changed the Disable and Enabled CPU Interface Table 133, 166 & 200 MHz FSB: (ABIT Stock ROMSIP Tweak by tictac)
- DISABLE CPU Interface : Unchanged
- ENABLED CPU Interface : Fix Unstable Timing in D26 SplitFire with 3D Application
2 . Vcore Revised same as D23 3D Fire R1 & R2
3 . Command Per Clock : Disabled By Default (DFI V3.19 BPL)
4 . New Small ABIT Logo at Boot Up
5 . 3D Fire Ingredients : Included
6 . Bios Layout : Stock ABIT Bios
7 . CPU Disconnect Function Patch as Recomended by nVidia Tech
8 . Side Band Addressing : Enable by Default ( Depends on VGA Driver. It might overwrite the setting to Disable)
9 . Dimm Driving Stregth & Slew Rate : Stock ABIT Configuration
10. Alpha Memory Timing : Stock ABIT Configuration
11. Unknown Processor -> Renamed to AMD XP Mobile for Athlon Mobile User
12. New Full Screen Logo on BootUp( Press Tab to show POST screen , Press Delete to enter Bios)
13. Improve 3DMark2001SE & 3D Application stability at high FSB
14. SATA Bios Version 4247

HÄMTAS: http://psy.sh.nu/~madmax/nf7-s/D26-BlackMantaray-2T.zip

******************************************

D26 BLACK-MANTARAY L12 [1T (CPC ON)]

1 . Changed the Disable and Enabled CPU Interface Table 133, 166 & 200 MHz FSB: (ABIT Stock ROMSIP Tweak by tictac)
- DISABLE CPU Interface : Unchanged
- ENABLED CPU Interface : Fix Unstable Timing in D26 SplitFire with 3D Application
2 . Vcore Revised same as D23 3D Fire R1 & R2
3 . Command Per Clock : Enable By Default (ABIT Stock V3.02 BPL)
4 . New Small ABIT Logo at Boot Up
5 . 3D Fire Ingredients : Included
6 . Bios Layout : Stock ABIT Bios
7 . CPU Disconnect Function Patch as Recomended by nVidia Tech
8 . Side Band Addressing : Enable by Default ( Depends on VGA Driver. It might overwrite the setting to Disable)
9 . Dimm Driving Stregth & Slew Rate : Stock ABIT Configuration
10. Alpha Memory Timing : Stock ABIT Configuration
11. Unknown Processor -> Renamed to AMD XP Mobile for Athlon Mobile User
12. New Full Screen Logo on BootUp( Press Tab to show POST screen , Press Delete to enter Bios)
13. Improve 3DMark2001SE & 3D Application stability at high FSB
14. SATA Bios Version 4247
15. Soft L12 for Unmodded Tbred & Mobile to 166Mhz Interface

HÄMTAS: http://psy.sh.nu/~madmax/nf7-s/D26-BlackMantaray-L12-1T.zip

******************************************

D26 BLACK-MANTARAY L12 [2T (CPC OFF)]

1 . Changed the Disable and Enabled CPU Interface Table 133, 166 & 200 MHz FSB: (ABIT Stock ROMSIP Tweak by tictac)
- DISABLE CPU Interface : Unchanged
- ENABLED CPU Interface : Fix Unstable Timing in D26 SplitFire with 3D Application
2 . Vcore Revised same as D23 3D Fire R1 & R2
3 . Command Per Clock : Disabled By Default (DFI V3.19 BPL)
4 . New Small ABIT Logo at Boot Up
5 . 3D Fire Ingredients : Included
6 . Bios Layout : Stock ABIT Bios
7 . CPU Disconnect Function Patch as Recomended by nVidia Tech
8 . Side Band Addressing : Enable by Default ( Depends on VGA Driver. It might overwrite the setting to Disable)
9 . Dimm Driving Stregth & Slew Rate : Stock ABIT Configuration
10. Alpha Memory Timing : Stock ABIT Configuration
11. Unknown Processor -> Renamed to AMD XP Mobile for Athlon Mobile User
12. New Full Screen Logo on BootUp( Press Tab to show POST screen , Press Delete to enter Bios)
13. Improve 3DMark2001SE & 3D Application stability at high FSB
14. SATA Bios Version 4247
15. Soft L12 for Unmodded Tbred & Mobile to 166Mhz Interface

HÄMTAS: http://psy.sh.nu/~madmax/nf7-s/D26-BlackMantaray-L12-2T.zip

******************************************

D26 MANTARAYS-XT [1T (CPC ON)]

1 . CPU Interface Table 166 & 200 MHz FSB: (ABIT Stock ROMSIP)
- DISABLE CPU Interface : Unchanged
- ENABLED CPU Interface : Improved 3D Handling & Bandwith Efficiency multiplier lower than 10
Bandwith Peak @ Multiplier 10.5
2 . Vcore same as D23 3D Fire R1 & R2
3 . Command Per Clock : Enable By Default (V3.19 BPL)
4 . New Small ABIT Logo at Boot Up
5 . 3D Fire Ingredients : Included
6 . Bios Layout : Manta Rays XT Edition
7 . CPU Disconnect Function Patch as Recomended by nVidia Tech
8 . Side Band Addressing : Enable by Default ( Depends on VGA Driver. It might overwrite the setting to Disable)
9 . Dimm Driving Stregth & Slew Rate : Stock ABIT Configuration
10. Alpha Memory Timing : Stock ABIT Configuration
11. AMD XP Mobile -> Renamed to AMD Athlon XP-M for Athlon Mobile User
12. New Full Screen Logo on BootUp by HouseRat@OcForums.com( Press Tab to show POST screen , Press Delete to enter Bios)
13. Improve 3DMark2001SE & 3D Application stability at high FSB
14. SATA Bios Version 4247
15. Soft L12 for Unmodded Tbred & Mobile

HÄMTAS: http://psy.sh.nu/~madmax/nf7-s/ABIT-NF7D26-MantaRaysXT-1T.zip

******************************************

D26 MANTARAYS-XT [2T (CPC OFF)]

1 . CPU Interface Table 166 & 200 MHz FSB: (ABIT Stock ROMSIP)
- DISABLE CPU Interface : Unchanged
- ENABLED CPU Interface : Improved 3D Handling & Bandwith Efficiency multiplier lower than 10
Bandwith Peak @ Multiplier 10.5
2 . Vcore same as D23 3D Fire R1 & R2
3 . Command Per Clock : Disabled By Default (V3.19 BPL)
4 . New Small ABIT Logo at Boot Up
5 . 3D Fire Ingredients : Included
6 . Bios Layout : Manta Rays XT Edition
7 . CPU Disconnect Function Patch as Recomended by nVidia Tech
8 . Side Band Addressing : Enable by Default ( Depends on VGA Driver. It might overwrite the setting to Disable)
9 . Dimm Driving Stregth & Slew Rate : Stock ABIT Configuration
10. Alpha Memory Timing : Stock ABIT Configuration
11. AMD XP Mobile -> Renamed to AMD Athlon XP-M for Athlon Mobile User
12. New Full Screen Logo on BootUp by HouseRat@OcForums.com( Press Tab to show POST screen , Press Delete to enter Bios)
13. Improve 3DMark2001SE & 3D Application stability at high FSB
14. SATA Bios Version 4247
15. Soft L12 for Unmodded Tbred & Mobile

HÄMTAS: http://psy.sh.nu/~madmax/nf7-s/ABIT-NF7D26-MantaRaysXT-2T.zip

******************************************

D26 Split-Fire [1T (CPC ON)]

1 . Changed the Disable and Enabled CPU Interface Table 133, 166 & 200 MHz FSB: (ABIT Stock ROMSIP Tweak by tictac)
- DISABLE CPU Interface : 133MHz , 166MHz & 200MHz fix D23 3D Fire R2 not booting issue
- ENABLED CPU Interface : Recalls the lost bandwidth when FSB is above 166MHz & 200 MHz at a multiplier that is under 10 (1-3% Better Efficiency than 3D Fire)
2 . Vcore Revised same as D23 3D Fire R1 & R2
3 . Command Per Clock : Enable By Default (ABIT Stock V3.02 BPL)
4 . New Small ABIT Logo at Boot Up
5 . L12 mod built in : Not Included (No L12 build in)
6 . 3D Fire Ingredients : Included
7 . Bios Layout : Stock ABIT Bios
8 . CPU Disconnect Function Patch as Recomended by nVidia Tech (Bus:0 Dev:0 Func:0 Offset:6E Data: 01)
9 . Side Band Addressing : Enable by Default ( Depends on VGA Driver. It might overwrite the setting to Disable)
10. Dimm Driving Stregth & Slew Rate : Stock ABIT Configuration
11. Alpha Memory Timing : Stock ABIT Configuration
12. Maximum Memory Bandwith Efficiency Estimated : (Tested @ 191MHz 2.5-3-3-11 128MB RAM)
- Single Channel : Multiplier Higher than 10 -> 95% / 86%
- Single Channel : Multiplier Lower than 10 -> 94% / 84%
- Dual Channel : Multiplier Higher than 10 -> No Hardware to Test
- Dual Channel : Multiplier Higher than 10 -> No Hardware to Test

HÄMTAS: http://psy.sh.nu/~madmax/nf7-s/D26-SplitFire-1T.zip

******************************************

D27 3D Fire [1T (CPC ON)]

- D23 3D Fire Interface
- 3D Fire Ingredients included
- D26 Mantarays XT PCR Patching
- 1T Timing

HÄMTAS: http://psy.sh.nu/~madmax/nf7-s/ABIT-NF7D27-3DFire-1T.zip

******************************************

D27 3D Fire [2T (CPC OFF)]

- D23 3D Fire Interface
- 3D Fire Ingredients included
- D26 Mantarays XT PCR Patching
- 2T Timing

HÄMTAS: http://psy.sh.nu/~madmax/nf7-s/ABIT-NF7D27-3DFire-2T.zip

******************************************

... Personligen använder jag D26 Manta Rays XT 2T ... Och jag tar inget ansvar om din flashning misslyckas. Abit FlashMenu flashar du med, finns att hämtas här http://psy.sh.nu/~madmax/nf7-s/abit_abit_flashmenu_1.36_47.ex...