DDR2 - 800 tickar bara i 358MHz?
Har ett GA-MA69GM-S2H med 2st 1gb Corsair CM2X1024-6400 1GB DDR2-800
Kikade lite i CPU-Z och ser att dessa bara tickar i 358Mhz.
Det är ju surt.
Nån som vet vad jag ska ändra i Bios för att få dessa att ticka i 800Mhz?
Memory Type DDR2
Memory Size 2048 MBytes
Channels Dual
Memory Frequency 358.0 MHz (CPU/7)
CAS# latency (CL) 5.0
RAS# to CAS# delay (tRCD) 5
RAS# Precharge (tRP) 5
Cycle Time (tRAS) 18
Bank Cycle Time (tRC) 22
Command Rate (CR) 2T
Memory SPD
-------------------------------------------------------------------------
DIMM # 1
SMBus address 0x50
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Corsair (7F7F9E0000000000)
Size 1024 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number CM2X1024-6400
Manufacturing date Week 23/Year 06
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 4.0-4-4-13-15 @ 270 MHz
JEDEC #2 5.0-5-5-18-22 @ 400 MHz
DIMM # 2
SMBus address 0x51
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Corsair (7F7F9E0000000000)
Size 1024 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number CM2X1024-6400
Manufacturing date Week 23/Year 06
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 4.0-4-4-13-15 @ 270 MHz
JEDEC #2 5.0-5-5-18-22 @ 400 MHz
/Kalleb
