Klistrar in spec. kopierat från SiSoftware Sandra för min nuvarande Athlon processor. Läs gärn igenom och skriv om det är värt att uppgradera till en AMD Phenom2 X2 555 3,2Ghz BE AM3 BlackEdition - Inet.se
SiSoftware Sandra
Processor
Manufacturer : AMD
Model : AMD Athlon(tm) 64 X2 Dual Core Processor 4400+
Speed : 2.31GHz
Peak Processing Performance (PPP) : 18.49GFLOPS
Adjusted Peak Performance (APP) : 5.55WG
Cores per Processor : 2 Unit(s)
Threads per Core : 1 Unit(s)
Type : Dual-Core
Bus : HyperTransport
Package : Socket AM2/ASB1
Maximum Speed : 2.3GHz / 1x 200MHz (200MHz)
Multiplier : 23/2x
Minimum/Maximum/Turbo Multiplier : 5x - 23/2x
Generation : G8
Name : M6B-BH Athlon 64 M2 X2 (K8 Brisbane) 65nm 2.2-3.0GHz ?V
Revision/Stepping : 8D3 / 6B / 1
Stepping Mask : BH-G1
Core Voltage Rating : 1.250V
Min/Max Core Voltage : 1.100V - 1.300V
Maximum Power : 53.42W
Maximum Physical / Virtual Addressing : 40-bit / 48-bit
Native Page Size : 4kB
Co-Processor (FPU)
Speed : 2.31GHz
Type : Integrated
Revision/Stepping : 8D3 / 6B / 1
Memory Controller
Integrated in Processor : Yes
Speed : 2.31GHz
Multiplier : 23/2x
Minimum/Maximum/Turbo Multiplier : 5x - 23/2x
Cache Information
Integrated Data Cache : 64kB, Synchronous, Write-Back, 2-way, Exclusive, 64 byte line size
Integrated Instruction Cache : 64kB, Synchronous, Write-Back, 2-way, 64 byte line size
L2 On-board Cache : 512kB, ECC, Synchronous, Write-Back, 16-way, Exclusive, 64 byte line size
L2 Cache Multiplier : 1x
Upgradeability
Socket/Slot : Socket M2
Supported Speed(s) : 3.2GHz
Processor Power Management
Processor Throttling Support : Yes
Throttle Range : 43% - 100%
Sensors 1
Model : ITE IT8716F LPC
Mainboard Specific Support : No
Sensors 2
Model : AMD K8 CPU [P0, C2, SC0, SN0]
Version : 107.01
Mainboard Specific Support : No
Power Rating(s)
CPU Core Power : 54.62W
CPU Cooling System Thermal Resistance : 0.34°C/W
Sensors
CPU 1 Temperature : 52.75°C td
Auto Fan Speed Control : No
CPU 1 Fan : 493rpm
CPU 1 DC Line : 1.26V
Features
FPU - Integrated Co-Processor : Yes
VME - Virtual Mode Extensions : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
CX8 - Compare & Exchange 8-bytes Instruction : Yes
APIC - Local APIC Integrated : Yes
SEP - Fast System Call : Yes
MTRR - Memory Type Range Registers : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : Yes
PSN - Unique Serial Number : No
CLF - Cache Line Flush Support : Yes
DS - Debug Trace & EMON Store : No
ACPI - Software Clock Control : No
(W)MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
SSE Technology : Yes
SSE2 Technology : Yes
SS - Self Snoop : No
HTT - Hyper-Threading Technology : No
TM - Thermal Monitor : No
PBE - Pending Break Enable : No
IA64 Technology : No
SSE3 Technology : Yes
PCLMULQDQ - Carryless Multiplication : No
MON - Monitor/MWait : No
DSCPL - CPL qualified Debug Store : No
VMX - Virtual Machine eXtensions : No
SMX - Trust Execution Technology : No
EIST - Enhanced SpeedStep Technology : No
TM2 - Thermal Monitor 2 : No
Supplemental SSE3 Technology : No
CID - Context ID : No
FMA - Fused Multiply/Add eXtensions : No
CX16 - Compare & Exchange 16-bytes Instruction : Yes
xTPR - Send Task Priority Messages : No
PDCM - PerfMon and Debug : No
DCA - Direct Cache Access : No
SSE4.1 Technology : No
SSE4.2 Technology : No
x2APIC - v2 APIC Mode : No
MOVBE - Byte-swap Load/Store : No
POPCNT - Pop Count : No
AES - Cryptography Support : No
XSAVE - eXtended State Management : No
OSXSAVE - OS Enabled eXtended States : No
AVX - Advanced Vector eXtensions : No
CVT16 - Half Precision Float Conversion : No
GIH - Guest in Hypervisor : No
DAZ - Denormals Are Zero : Yes
Extended Features
SYCR - Extended Fast System Call : Yes
EMMX - Extended MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
FXSR - Instructions Optimisation : Yes
3DNow! Technology : Yes
Extended 3DNow! Technology : Yes
XD/NX - No-execute Page Protection : Yes
AMD64/EM64T Technology : Yes
RDTSCP - Serialised TSC : Yes
P1GB - 1GB Large Page Support : No
LAHF/SAHF - Support in 64-bit : Yes
CMP - Multi-Core Legacy Mode : Yes
SVM - Secure Virtual Machine : Yes
APICEX - Extended APIC Register Space : Yes
AltMovCr8 - Lock Move CRn : Yes
ABM - Advanced Bit Manipulation : No
SSE4A Technology : No
MASSE - Misaligned SSE Mode : No
3D Now! Prefetch Technology : Yes
OSVW - OS Visible Work-around : No
IBS - Instruction Based Sampling Support : No
XOP - eXtended OPerations : No
SKINIT - HVCE Support : No
WDT - Watchdog Timer Support : No
TBM - TBM Support : No
LWP - LightWeight Profiling Support : No
FMA4 - 4 Operands Fused Multiply/Add eXtensions : No
TCE - Translation Cache eXtension : No
NID - Multi-Node Support : No
ToP - Extended Topology : No
Power Management Features
TDP - TDP Limiting Support : No
CPB - Core Performance Boost : No
TSCINV - TSC Invariant Across States : No
HWPS - Hardware P-State Control : No
1/2 - Half Multiplier Support : Yes
STC - Software Thermal Control : Yes
TM - Thermal Monitor : Yes
TTP - Thermal Trip : Yes
VID - Voltage Control : Yes
FID - Frequency Control : Yes
TS - Thermal Sensor Integrated : Yes
Virtual Machine Features
Version : 1.01
NP - Nested Paging : No
LBRV - LBR Virtualisation : Yes
Advanced Settings
System Ack Limit : 1 request(s)
System Victim Limit : 0 request(s)
Extended MTRR Types : Yes
Top of Memory : 00000000E0000000
Top of Memory2 : 0000000120000000
Symmetric Multiprocessing (SMP) Settings
Maximum Supported Configuration : 1-way
Bootstrap CPU : Yes
Global APIC Engaged : Yes
x2APIC - v2 APIC Mode : No
APIC ID : 0 : P0C0T0
Cluster ID : 0
Symmetric Arbitration ID : 0
Memory Range : 00000000FEE00000
Machine Check Architecture Settings
Number of Reporting Banks : 5
Exception Reporting Control Support : Yes
Variable Range MTRR Settings
MTRR 0 : 00000000-7FFFFFFF WB
MTRR 1 : 80000000-BFFFFFFF WB
MTRR 2 : C0000000-DFFFFFFF WB
MTRR 3 : 0000000100000000-000000011FFFFFFF WB
Fixed Range MTRR Settings
MTRR 0 Range 0 : 00000000-0000FFFF WB
MTRR 0 Range 1 : 00010000-0001FFFF WB
MTRR 0 Range 2 : 00020000-0002FFFF WB
MTRR 0 Range 3 : 00030000-0003FFFF WB
MTRR 0 Range 4 : 00040000-0004FFFF WB
MTRR 0 Range 5 : 00050000-0005FFFF WB
MTRR 0 Range 6 : 00060000-0006FFFF WB
MTRR 0 Range 7 : 00070000-0007FFFF WB
MTRR 1 Range 0 : 00080000-00083FFF WB
MTRR 1 Range 1 : 00084000-00087FFF WB
MTRR 1 Range 2 : 00088000-0008BFFF WB
MTRR 1 Range 3 : 0008C000-0008FFFF WB
MTRR 1 Range 4 : 00090000-00093FFF WB
MTRR 1 Range 5 : 00094000-00097FFF WB
MTRR 1 Range 6 : 00098000-0009BFFF WB
MTRR 1 Range 7 : 0009C000-0009FFFF WB
MTRR 2 Range 0 : 000A0000-000A3FFF UC
MTRR 2 Range 1 : 000A4000-000A7FFF UC
MTRR 2 Range 2 : 000A8000-000ABFFF UC
MTRR 2 Range 3 : 000AC000-000AFFFF UC
MTRR 2 Range 4 : 000B0000-000B3FFF UC
MTRR 2 Range 5 : 000B4000-000B7FFF UC
MTRR 2 Range 6 : 000B8000-000BBFFF UC
MTRR 2 Range 7 : 000BC000-000BFFFF UC
MTRR 3 Range 0 : 000C0000-000C0FFF WP
MTRR 3 Range 1 : 000C1000-000C1FFF WP
MTRR 3 Range 2 : 000C2000-000C2FFF WP
MTRR 3 Range 3 : 000C3000-000C3FFF WP
MTRR 3 Range 4 : 000C4000-000C4FFF WP
MTRR 3 Range 5 : 000C5000-000C5FFF WP
MTRR 3 Range 6 : 000C6000-000C6FFF WP
MTRR 3 Range 7 : 000C7000-000C7FFF WP
MTRR 4 Range 0 : 000C8000-000C8FFF UC
MTRR 4 Range 1 : 000C9000-000C9FFF UC
MTRR 4 Range 2 : 000CA000-000CAFFF UC
MTRR 4 Range 3 : 000CB000-000CBFFF UC
MTRR 4 Range 4 : 000CC000-000CCFFF UC
MTRR 4 Range 5 : 000CD000-000CDFFF UC
MTRR 4 Range 6 : 000CE000-000CEFFF UC
MTRR 4 Range 7 : 000CF000-000CFFFF UC
MTRR 5 Range 0 : 000D0000-000D0FFF UC
MTRR 5 Range 1 : 000D1000-000D1FFF UC
MTRR 5 Range 2 : 000D2000-000D2FFF UC
MTRR 5 Range 3 : 000D3000-000D3FFF UC
MTRR 5 Range 4 : 000D4000-000D4FFF UC
MTRR 5 Range 5 : 000D5000-000D5FFF UC
MTRR 5 Range 6 : 000D6000-000D6FFF UC
MTRR 5 Range 7 : 000D7000-000D7FFF UC
MTRR 6 Range 0 : 000D8000-000D8FFF UC
MTRR 6 Range 1 : 000D9000-000D9FFF UC
MTRR 6 Range 2 : 000DA000-000DAFFF UC
MTRR 6 Range 3 : 000DB000-000DBFFF UC
MTRR 6 Range 4 : 000DC000-000DCFFF UC
MTRR 6 Range 5 : 000DD000-000DDFFF UC
MTRR 6 Range 6 : 000DE000-000DEFFF UC
MTRR 6 Range 7 : 000DF000-000DFFFF UC
MTRR 7 Range 0 : 000E0000-000E0FFF UC
MTRR 7 Range 1 : 000E1000-000E1FFF UC
MTRR 7 Range 2 : 000E2000-000E2FFF UC
MTRR 7 Range 3 : 000E3000-000E3FFF UC
MTRR 7 Range 4 : 000E4000-000E4FFF UC
MTRR 7 Range 5 : 000E5000-000E5FFF UC
MTRR 7 Range 6 : 000E6000-000E6FFF UC
MTRR 7 Range 7 : 000E7000-000E7FFF UC
MTRR 8 Range 0 : 000E8000-000E8FFF UC
MTRR 8 Range 1 : 000E9000-000E9FFF UC
MTRR 8 Range 2 : 000EA000-000EAFFF UC
MTRR 8 Range 3 : 000EB000-000EBFFF UC
MTRR 8 Range 4 : 000EC000-000ECFFF UC
MTRR 8 Range 5 : 000ED000-000EDFFF UC
MTRR 8 Range 6 : 000EE000-000EEFFF UC
MTRR 8 Range 7 : 000EF000-000EFFFF UC
MTRR 9 Range 0 : 000F0000-000F0FFF WT
MTRR 9 Range 1 : 000F1000-000F1FFF WT
MTRR 9 Range 2 : 000F2000-000F2FFF WT
MTRR 9 Range 3 : 000F3000-000F3FFF WT
MTRR 9 Range 4 : 000F4000-000F4FFF WT
MTRR 9 Range 5 : 000F5000-000F5FFF WT
MTRR 9 Range 6 : 000F6000-000F6FFF WT
MTRR 9 Range 7 : 000F7000-000F7FFF WT
MTRR 10 Range 0 : 000F8000-000F8FFF WT
MTRR 10 Range 1 : 000F9000-000F9FFF WT
MTRR 10 Range 2 : 000FA000-000FAFFF WT
MTRR 10 Range 3 : 000FB000-000FBFFF WT
MTRR 10 Range 4 : 000FC000-000FCFFF WT
MTRR 10 Range 5 : 000FD000-000FDFFF WT
MTRR 10 Range 6 : 000FE000-000FEFFF WT
MTRR 10 Range 7 : 000FF000-000FFFFF WT
PAT Settings
PAT 0 : WB
PAT 1 : WC
PAT 2 : UC-
PAT 3 : UC
PAT 4 : WB
PAT 5 : WC
PAT 6 : UC-
PAT 7 : UC
Performance Tips
Tip 210 : Mainboard supports faster CPUs, so the CPU can be upgraded when needed.
Notice 224 : SMBIOS/DMI information may be inaccurate.
Warning 216 : CPU fan has failed! Check it.
Tip 2 : Double-click tip or press Enter while a tip is selected for more information about the tip.
Nicke
