Ubuntu-noobfrågor

Tjena, har just slängt in Ubuntu på datorn och jag undrar hur jag ska göra för att få högre upplösning och hz?

Har radeon9600 (non-pro).
Hur gör jag för att installera drivrutinerna till kortet?
/toxic

Wooteliwoot?

Det blir inte bättre även fast jag säger åt ubuntu att jag ska ha 1600x1200 i upplösning.

Ska testa detta som jag läste på ett annat forum:
The unnoficial ATI ubuntu howto:

1)If you have installed the drivers through synaptic or apt-get, uninstall them using apt-get or synaptic(or kynaptic).
2) Download the 50MB(!) installer from ATI (http://www2.ati.com/drivers/linux/a....16.20-i386.run)
3) check that you have your kernel headers in /usr/src/linux-headers-<version> and that /usr/src/linux is a symbolic link to that directory. This is needed to compile the fglrx kernel module.
3.1)If you don't have the headers get them by finding the package in synaptic called "linux-headers-(the name you got from uname -r)". Then "ln -s /usr/src/linux-headers<version> /usr/src/linux".
4) change to single user mode via "sudo telinit 1", this will drop you to the console.
5) start the installer as root: "sudo sh ./ati-driver-installer-xxxxx"
6) most people can just accept the defaults in the installer (just hit enter at each screen) until the driver starts installation.
7) wait for installation to finish (shouldn't take too long, 30sec at most maybe).
run "sudo fglrxconfig" to generate your /etc/X11/xorg.conf file or simply change "radeon" to "fglrx" in your Device section if it exists already. It might be a good idea to generate one even if you have one already just to see how they are different. Make sure you don't copy over the original!
9.)reboot (I recommend a reboot, even though it is technically not necessary, as I've hit problems before when not rebooting).

Vad tror ni om det?

Edit: Kommer till steg 5. Sen vet jag inte vart jag ska lägga ati-driver-installer-8.16.20-x86_64.run som jag tankade från ati.com