# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
HorizSync 31.5-110
VertRefresh 50-180
Option "DPMS"
# === mode lines based on GTF ===
# 640x480 @ 190.00 Hz (GTF) hsync: 102.03 kHz; pclk: 89.79 MHz
Modeline "640x480_190.00" 89.79 640 688 760 880 480 481 484 537 -HSync +Vsync
# 800x600 @ 160.00 Hz (GTF) hsync: 105.44 kHz; pclk: 116.41 MHz
Modeline "800x600_160.00" 116.41 800 864 952 1104 600 601 604 659 -HSync +Vsync
# 1024x768 @ 125.00 Hz (GTF) hsync: 103.25 kHz; pclk: 145.38 MHz
Modeline "1024x768_125.00" 145.38 1024 1104 1216 1408 768 769 772 826 -HSync +Vsync
# 1320x1020 @ 100.00 Hz (GTF) hsync: 108.00 kHz; pclk: 196.13 MHz
Modeline "1320x1020_100.00" 196.13 1320 1424 1568 1816 1020 1021 1024 1080 -HSync +Vsync
EndSection
*********** OCH LITE LÄNGRE NED MED MASSA SKIT BORTTAGET ******
**********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1320x1020_100.00" "1024x768_125.00" "800x600_160.00" "640x480_190.00"
ViewPort 0 0 # initial origin if mode is smaller than desktop
EndSubsection
EndSection