Issues with H80i and corsair link

Hello
I just mounted a brand new H80i water cooler on my i5-4690K on an Asus Z97M-plus motherboard
At first my mother board did not recognize the pump connected to the cpu fan connector and I was getting constant CP fan failure and had to F1 into the bios
After I force started into windows (8.1) I was able to install Corsairlink 2 and thus view some monitoring. I was unable to get any fan or pump information. My mainboard software monitor, Asus3 showed the pump running at 2300rpm
Via the Corsair website I did the registry trick for the USB issues in Win8.1. After restart the bios saw the pump rotating, in windows Corsairlink did an immediate USB update.
Then began the nightmare. I still was not getting fan or pump information
I restarted and started getting the CPU fan error and had to F1 into the bios. The mainboard was not reading the pump anymore. I reanabled and disabled mainboard fan connectors in the bios ad nausum , tried different mainboard fan connectors. I could only force start into windows. The radiator fans were now running full blast and the pump speed was 0000 rpm in the with my Asus3 mainboard monitor... temps were 33-35 degrees but I dare not do gaming or benching...
Trying to unsinstall and reainstall the corsiar link does not help.
PS never got those cool display dial graphics in corsairlink....
HELP!!!

yes i swapped around USB headers as shown on the internet
No help

Just update the Bios of my Asus Z97M-plus, all the same.

Just for the fun of it. I connected my older Antec 620 H20 into the same CPU header and turned on the PC. The Pump turned on immedeatly and even the pump speed showed up in the Bios

Hej
Flera olika versioner...RC v2_5_5145, PC-v2_6-5214, 1,2,5, v1.2.11.s19 samt olika firmware till
Men om du läst på vad jag skrivit på den svenska post. Jad testade kylaren på en externt fläktkontroll mad display och kopplad kylaren till en SATA kontakt. Jag kände på vattenpumpen och den vibrerar, fungera men varvtalet på displayen är fortförande noll. Det orsakade CPU FAN error vid startup. Förmodligen den lilla signal sladd som kopplas till moderkortet CPU FAN kontakt fungera inte

Här är videon igen http://youtu.be/CN6ZEwkHR54

Jag har kontaktade Webhallen och ska lämna in till dem