Permalänk
Medlem

BSOD problem

Hej, har fått ett irriterande problem.
Får ibland bsods med meddelandet "MEMORY_MANAGEMENT"
Har läst på andra trådar/forum att detta kan vara ett fel på mina ram-minnen eller drivrutiner. Har kört programet WhoCrashed och fick detta:

On Sun 2011-12-04 22:13:06 GMT your computer crashed
crash dump file: C:\Windows\Minidump\120411-19780-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x7CC40)
Bugcheck code: 0x1A (0x5003, 0xFFFFF70001080000, 0xB167, 0x16825009)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver which cannot be identified at this time.

Har förövrigt formaterat datorn en gång, och problemet verkade vara borta, men för någon dag sedan så började detta hända igen.

Undrar vad man kan göra för att lösa detta problem.

Mina specs på datorn:
Windows 7 Proffesional x64
AMD Phenom II X4 965 Processor
8 GB RAM (2 stickor)
XFX Radeon HD6950 2048MB Dual Fan

Är jättetacksam för hjälp!

Permalänk

http://msdn.microsoft.com/en-us/library/ff557391%28v=vs.85%29...

Go to a command line window and type sfc /scannow. Let the system file checker inspect your system files and replace those that are corrupt or othrwise damaged.

Visa signatur

I was in Hong Kong and this guy on the street was selling these dodgy-looking CDs labelled 'Rindows' and 'Frotoshop'.
Display driver uninstaller

Permalänk
Medlem

Okej, jag gjorde som du sa, körde sfc /scannow och efter det var klart stod det att vissa filer inte kunde fixas och att ändringar kommer göras nästa gång datorn startas om, så jag startade om datorn men då när den skulle starta om kom en till bsod, efter det så kollade jag i WhoCrashed igen och då stod det såhär:

On Sun 2011-12-04 23:22:19 GMT your computer crashed
crash dump file: C:\Windows\Minidump\120511-29796-01.dmp
This was probably caused by the following module: ntfs.sys (Ntfs+0xAD620)
Bugcheck code: 0x50 (0xFFFFF8A21500170C, 0x1, 0xFFFFF880012A542F, 0x5)
Error: PAGE_FAULT_IN_NONPAGED_AREA
file path: C:\Windows\system32\drivers\ntfs.sys
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT File System Driver
Bug check description: This indicates that invalid system memory has been referenced.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in a standard Microsoft module. Your system configuration may be incorrect. Possibly this problem is caused by another driver on your system which cannot be identified at this time.

Jag förstår verkligen ingenting och vill lösa detta snart

Permalänk

Cirka en vecka sedan verkar jag ha löst mitt BSOD-problem på min nya dator. Jag testade både det ena och det andra i ett par veckor och läste någonstans om att Zonealarm kan orsaka BSOD. Jag hade ca. 4-5 bluescreens om dagen. Avinstallerade Zonealarm och efter det (1 vecka nu) så har jag inte haft ett enda.
Bara ett tips till ALLA med ntoskrnl.exe problemet samt "Possibly this problem is caused by another driver on your system which cannot be identified at this time.".

Död åt Zonealarm!! Som förövrigt är ett bra gratisprogram i min mening :/

/Finnen

Visa signatur

i7 2600k 3,4ghz | CM Hyper 212 EVO | Asus P8Z68-V PRO | Asus GTX 780 DCUII 3GB | Be Quiet! Straight Power E9 680W 80+ Gold Mod. | Corsair XMS3 1600mhz 8GB | WD 1TB HDD | Corsair SSD Force Series 115GB | CM HAF 912 Plus Midi Tower | 2x Noctua NF-S12B ULN 120mm

Permalänk
Medlem

hmm okej, det hälpte inte mig så mycket, eftersom jag inte har zonealarm, jag har dock avast free antivirus om det kanske kan vara nåt problem med det.
Håller förövrigt nu på att köra memtest86+ på datorn och har fått många errors, 1246 stycken hittils
men jag förstår inget från det, jag menar, hur löser jag det? är det fel på stickorna eller?