Hjälp med clockning

FRÅGA: Jag vill klocka mitt ATI-kort, vilket program är bäst?
SVAR: ATiTool, RivaTuner och PowerStrip funkar bra, ni hittar dem på
http://www.guru3d.com.

http://www.sweclockers.com/forum/showthread.php?s=&threadid=6...

om du läst översta tråden i detta forum hade du funnit detta.

Till att börja med kan du använda dig av klockningsdelen av forumet. Program du kan testa är Rivatuner, Coolbits mfl. Den som söker han.......

"I had this problem as well. You just have to OC using this directions. Only OCing the memory will lead to lower benchmark speeds, and only if it is done incorrectly. Read this little guide:
http://www.overclock.net/ati-drivers...irections.html
I use ATI Tray Tools latest Beta version to OC the core. While keeping ATI Tray Tools in the tray, then open Rivatuner (I used 16.2, but final may work, not exactly the same as I described there) and set the memory clocks according to your clock stepping as described in my little guide. Mine stepping is 27 MHz for the memory. I have my card set to 661 MHz core, 823 MHz memory. This is completely rock solid stable. I also have read that increasing the PCI-E bus speed will allow for some more OCing on the core, but I haven't tried this just yet (out of town now)
Also, if you can't get Rivatuner final to work, when I get back in town I'll create a torrent for you or something and I'll upload it."

http://www.overclock.net/ati/145755-x1950pro-oddity.html

Kolla även:
http://www.overclock.net/ati-drivers-overclocking-software/14...

Grafikkort: HIS X1950 Pro 256Mb GDDR3