Tips! Kör Synology "DiskStation Manager" på din x86-server (även ESXi)
Vill bara tipsa om ett alternativ till FreeNAS och liknande som heter Synology DiskStation Manager, DSM. Ni som har testat en Synology NAS känner igen det, livedemo finns här. DSM 4.2 finns portat till x86-processorer och kan alltså köras på nästan all hårdvara. Jag har nu även installerat det som en virtuell maskin på min ESXi 5.1 server. Fungerar utmärkt. Här kommer en kort guide:
UPDATE: Komplett guide för ESXI 5.5.0 finns här
För x86-system
Kopierat från http://www.avsforum.com/t/1460222/how-to-roll-your-own-synolo...
The How-To(for REAL Hardware):
1. Extract 'DS3612xs_2668_4.1%2B%2B.7z' using 7-zip. You'll have three files.
-DSM_DS3612xs_2668.pat, DSM installation file
-SynoBoot_3612xs_4.1++.img , bootloader image (needed if youll be testing on REAL hardware)
-SynoBoot_3612xs_4.1++.vdi, VirtualBox virtual disk file(needed if youll be testing on VM )
2. Extract 'win32diskimager-binary06.rar'. Insert your USB flash drive and launch W32DiskImager.
-Load the .IMG file from STEP1 and choose your USB drive from the drop down list.
-Click Write and WAIT for complete.
Pre-Prep your PC:
-Set BIOS to boot from USB
-WIPE SATA disk youll be using, then connect to 'SATA_0' port on your motherboard
-Connect to network switch(DHCP Required)
3. Insert USB into PC and power it ON. If you have a console(KVM) attached to the PC youll see machine coming up.
4. Launch Synology Assistant from your Windows workstation and click 'Search'. If you've done everything correctly you'll see a new 'DiskStation' has been found.
-- IMPORTANT -- Disconnect the USB flash drive from the computer for this next step.
5. Right-click the new 'DiskStation' and choose 'Install'. Browse and select the 'DSM_DS3612xs_2668.pat' file. Choose a Name for the DiskStation, a new default admin password and IP configuration. After installation is complete the DiskStation will reboot automatically. Power it OFF manually now.
-- INSERT USB Flash drive back into PC --
6. Power on PC. DSM will boot normally. Back to Synology Assistant click 'Search' again. Depending on the name and network config you chose during installation you will see now see a DiskStation has been found with the NAME you chose. The previous Installation Progress bar will show 100% complete and you can now access your DiskStation by opening a browser and pointing to the IP its configured with.
Notes:
For real hardware I've tested this build on an HP N40L I have access to and I'm very impressed with the performance. Compared to a 'real' DS1512+ I have sitting on my LAN for primary storage in my home I have to say this franken-unit performs much better. The DS1512+ comes with a limited(when compared to any PC) Atom CPU and only 4GB of RAM. While the Atom is sufficient for NAS duties I feel the CPU in the N40L far outperforms when faces with more cpu intensive tasks.
Here are some recommended repositories to add to your DiskStation with useful packages like CrashPlan, SABNZBd, and others:
http://packages.synocommunity.com
http://packages.pcloadletter.co.uk
Good luck on your build...If this is working 100% on your hardware I'd love to hear what MOBO/NIC/CHIPSET you have smile.gif
Filer som behövs:
win32diskimager-binary06.rar
SynologyAssistantSetup-4.3-4206.exe
modules-4.2-02.05.2013.tar
DS3612xs_4.2-3211_x64_Microserver-20130612.pat
DS3612xs_4.2-3211_x64_Microserver-20130612.img
För ESXi 5.1
Kopierat från http://xpenology.com/forum/viewtopic.php?f=2&t=558
Förutsätter att du har en färdiginstallerad ESXi-server.
Följ guiden Idiots Guide to DSM 4.2 and ESXi 5.1 av användaren Tuatara
Filer som behövs:
esxi_install_v2-1.rar
OBS!
På sidan 13 i PDF'n under rubriken "RDM Disk VMDK File Preparation" så skapar Tuatara RDM VMDK-filen med kommandot:
vmkfstools –z /vmfs/devices/disks/vml.01000000002020202020202020202020203951473358423630535433353030 RDM1.vmdk -a pvscsi
Jag fick aldrig det att fungera utan jag körde:
vmkfstools –z /vmfs/devices/disks/vml.01000000002020202020202020202020203951473358423630535433353030 /vmfs/volumes/Datastore/Synology/RDM1.vmdk -a pvscsi
jag var alltså tvungen att skriva hela sökvägen där RDM1.vmdk skulle skapas. Exempel här. En annan sak som buggade lite för mig var SCSI-kontrollern, även om jag enligt guiden valde "VMware Paravirtual" under konfigurationen så när jag sedan hade startat maskinen så hade den ändrat till "LS Logic" och jag fick stänga av maskinen och ändra den igen till "Paravirtual" då fungerade det (exempel). När jag sedan attachade RDM VMDK-filen i Paravirtual-kontrollern så valde jag SCSI(0:1) för att det skulle fungera.
Hoppas att någon mer än jag gillar detta! Exempel på när det är klart. Filerna håller på att laddas upp på Dropbox, alla är klara utom esxi_install_v2-1.rar som dröjer lite. En seg mirror finns i pdfen så länge.
System #1 - Intel 6700K@4.8GHz + Corsair H110i PnP ~ ASUS ROG MAXIMUS VIII RANGER ~ 32GB Corsair Vengeance LPX DDR4 2400MHz ~ 2x Gainward GeForce GTX 980 Ti 6GB 'GS' ~ 2x 512GB Samsung EVO 850 ~ Corsair RM1000W ~ Acer 27" Predator G-Sync XB271HU
System #2 - Intel 2500K@5.0GHz + Corsair H60+PnP ~ ASRock P67 Extreme4 ~ 16GB DDR3 ~ Gainward 980Ti 'GS' ~ BenQ 24" XL2430T ~ 2x512GB Samsung EVO 840 ~ 750W Corsair TX