Permalänk
Medlem

Uncore/CPU

Hej.

Har det senaste dagarna försökt maxa min Uncore men börjar bli lite osäker på vad som är problemet då Prime95 slutar svara efter några timmar.

Uncore: 3072
CPU: 4427

Fungerar. Men Uncore på 3200 och uppåt slutar Prime95 att svara efter några timmar.

Om vi skippar alla grunder till OC och fokuserar på en sak.
Att öka Uncore påverkar även processorns prestanda vilket syns tydligt på tester och 3DMark11. Min fråga är, krävs det mer Vcore även när man ökar Uncore eller är det QPI/DRAM som behövs för att Uncore ska kunna driva i högre frekvenser?

Har försökt med många olika värden på QPI/DRAM utan effekt.
Kan det vara så att Vcore behöver ökas när Uncore ökas också?

Mvh
Alex

Visa signatur

ASUS RIIIE | i7 970 @4.6GHz | DOMINATOR 1.92GHz CL8 6x2GB | GTX 970 STRIX | C300 SSD 64GBX2 | EVO 850 500GB | CORSAIR AX1200i | CORSAIR H100i | CORSAIR AIR 540 |

Permalänk
Medlem

"- Uncore is the L3 cache and memory controller, and its powered not by Vcore, but by VTT.
Uncore multiplier needs to be 2x or higher than the memory multiplier.
- Uncore- This is in the block diagram but not written.
Uncore is a frequency that the CPU handles everything from the north bridge to the south bridge.
- all part of component need voltage, no voltage will die "

"CPU VTT aka QPI aka Uncore
The voltage that goes through the part of your chip that is not the core. This voltage controls the core i7's memory controller and connects it to the RAM. This is why it is important to keep CPU VTT within .5 volts of Vdimm. If your Vdimm is 1.65 volts in bios, set your CPU VTT to 1.15 or higher to be safe. Intel's maximum recommended CPU VTT is 1.35 volts, hence why many believe the Vdimm maximum is actually 1.85"

de e qpi.

var försiktig nu, för det låter som du har nått max tak för din processor.

Visa signatur

My rig 144hz 1440p 27" samsung g5, xfx 6950xt, 11900K, TM Peerless assassin,Gigabyte z590 UD, 32GB 3200MHz Vengeance, 1tb nv2, 2TB SSD 4TB HDD, corsair750 vengeance, Lancool 215.
GFs rig 144Hz samsung 1080p, Palit 3060Ti, 10400F,corsair H60 , B560 Auros, 16GB 3000MHz, 500GB NV1, 480GB A400, 2TB+750GB HDD, Seasonic 650 gold, Kolink Void Laptop Lenovo Legion 5, 2060, 4800H, 16GB, 1,5TB NVME HTPC 3060, 10400F, 16GB, 500GB NVME, 960GB A400 3rd PC 3060Ti, 3700X, Hyper 212, 16GB, 250GB SSD, 2TB HDD, 650w gold, P300A

Permalänk
Medlem
Skrivet av Gtoxed:

"- Uncore is the L3 cache and memory controller, and its powered not by Vcore, but by VTT.
Uncore multiplier needs to be 2x or higher than the memory multiplier.
- Uncore- This is in the block diagram but not written.
Uncore is a frequency that the CPU handles everything from the north bridge to the south bridge.
- all part of component need voltage, no voltage will die "

"CPU VTT aka QPI aka Uncore
The voltage that goes through the part of your chip that is not the core. This voltage controls the core i7's memory controller and connects it to the RAM. This is why it is important to keep CPU VTT within .5 volts of Vdimm. If your Vdimm is 1.65 volts in bios, set your CPU VTT to 1.15 or higher to be safe. Intel's maximum recommended CPU VTT is 1.35 volts, hence why many believe the Vdimm maximum is actually 1.85"

de e qpi.

var försiktig nu, för det låter som du har nått max tak för din processor.

Tack för svar.

Jo så långt är jag med, det är basics :). Enligt intels specs är det 1.35 men det är omöjligt att driva 6x2GB 1900MHz med 1.35V VTT. De flesta har dragit över till 1.4-1.45. Har en gulftown btw så min uncore har x1.5 DRAM multiplier som lägst. Försöker pusha min uncore till 3600 men den vill inte. Kanske ska jag nöja mig med 3072 eller låter det lite lågt för uncore på en gulftown?
Min VTT duggar på 1.43V just nu och det verkar inte ge någon effekt längre när jag höjer. Därför undrar jag om det kan vara så att Vcore kan behöva höjas när Uncore sätter högre press på komponenterna?

Vill gärna veta om 3072 på en gulftown är bra eller för lågt. Annars är måste jag kolla över hela överklockningen, men om det är ett bra värde så kommer jag stanna där. Vill upp till 3400 eller 3600.

Vad tycker ni?

Visa signatur

ASUS RIIIE | i7 970 @4.6GHz | DOMINATOR 1.92GHz CL8 6x2GB | GTX 970 STRIX | C300 SSD 64GBX2 | EVO 850 500GB | CORSAIR AX1200i | CORSAIR H100i | CORSAIR AIR 540 |