SSL problem med DGL-4300
Hej.
Jag får inte det att fungera med min ftpserver.
Jag vill köra Implicit SSL. Jag har kört detta innan med en annan server och andra routrar (Linksys, 3Com) och då har det fungerat men nu får jag ej till det. Jag har testat både serv-U och Gene6 men inget fungerar och jag tror inte problemet är uppsättningen i ftp programmen. Jag tror det är något med routern jag har missat.
På virtual server sidan har jag öppnat följande portar:
20/20
21/21
990/990
På Special applications har jag testat dessa (samtidigt om det går annars en och en också): (Trigger/input)
20/20
21/21
1401-1410/1401-1410
990/1401-1410
1401-1410/990
där 1401-1410 är portarna jag forwardar till från min ftpserver för att köra passive.
Är det något mer som skall kryssas i på nån sida i routerns webgui?
Jag har testat köra med CuteFTP och FXP.
Följade logg får jag när jag försöker logga in:
*** CuteFTP 8.0 - build Jan 15 2007 ***
STATUS:> [2007-08-07 09:22:23] Getting listing ""...
STATUS:> [2007-08-07 09:22:23] Connecting to FTP server... x.x.x.x:990 (ip = x.x.x.x)...
STATUS:> [2007-08-07 09:22:23] Socket connected. Waiting for welcome message...
STATUS:> [2007-08-07 09:22:23] Initializing SSL module.
STATUS:> [2007-08-07 09:22:23] Connected. Exchanging encryption keys...
STATUS:> [2007-08-07 09:22:23] SSL Connect time: 125 ms.
STATUS:> [2007-08-07 09:22:23] SSL encrypted session established.
[2007-08-07 09:22:23] 220 Gene6 FTP Server v3.8.0 (Build 34) ready...
STATUS:> [2007-08-07 09:22:23] Connected. Authenticating...
COMMAND:> [2007-08-07 09:22:23] USER test
[2007-08-07 09:22:23] 331 Password required for test.
COMMAND:> [2007-08-07 09:22:23] PASS *****
[2007-08-07 09:22:23] 230 User test logged in.
STATUS:> [2007-08-07 09:22:23] Login successful.
COMMAND:> [2007-08-07 09:22:23] PWD
[2007-08-07 09:22:23] 257 "/" is current directory.
STATUS:> [2007-08-07 09:22:23] Home directory: /
COMMAND:> [2007-08-07 09:22:23] FEAT
[2007-08-07 09:22:23] Informational Message Only:
211-Extensions supported:
AUTH TLS
CCC
CLNT
CPSV
EPRT
EPSV
MDTM
MFCT
MFMT
MLST type*;size*;create;modify*;
MODE Z
PASV
PBSZ
PROT
REST STREAM
SIZE
SSCN
TVFS
UTF8
XCRC "filename" SP EP
XMD5 "filename" SP EP
XSHA1 "filename" SP EP
211 End.
STATUS:> [2007-08-07 09:22:23] This site supports features.
STATUS:> [2007-08-07 09:22:23] This site supports XCRC.
STATUS:> [2007-08-07 09:22:23] This site supports SIZE.
STATUS:> [2007-08-07 09:22:23] This site can resume broken downloads.
COMMAND:> [2007-08-07 09:22:23] MODE Z
[2007-08-07 09:22:23] 200 Mode Z ok.
COMMAND:> [2007-08-07 09:22:23] REST 0
[2007-08-07 09:22:23] 350 Restarting at 0. Send STORE or RETRIEVE.
COMMAND:> [2007-08-07 09:22:23] PBSZ 0
[2007-08-07 09:22:23] 200 PBSZ=0
COMMAND:> [2007-08-07 09:22:23] PROT P
[2007-08-07 09:22:23] 200 PROT command successful.
COMMAND:> [2007-08-07 09:22:23] PASV
[2007-08-07 09:22:23] 227 Entering Passive Mode (x,x,x,x,5,122)
STATUS:> [2007-08-07 09:22:23] Connecting FTP data socket... x.x.x.x:1402...
ERROR:> [2007-08-07 09:22:44] The connection failed due to an error or timeout.
1) Verify that the destination IP address is correct.
2) Increase the connection timeout threshold under Global Settings | Connection.
3) Switch to the opposite data connection type (PASV or PORT) under Site Settings | Type tab.
4) Verify that the problem is not local by trying to connect to an alternate server.
5) If a server name was used, verify it resolves to the correct address.
6) If using a local server table for server name resolution, check to see that it doesn't resolve to an obsolete address.
7) Try pinging the address.
Cool If you are using a router, verify the router is up and running (check by pinging it and then ping an address outside of the router).
9) Do a traceroute to the destination to verify all routers along the connection path are operational.
10) Verify that your subnet m
