jag skulle flasha mitt grafikort med hjälp av en ny bios och en text guide
1. Download nv flash (bundeled with this .rar archive)
2. Download a 8800GT 512MB PCIE GEN1 (1.x) BIOS (ASUS bundeled with this .rar - it should work with most brands, but there are NO guaranties!)
3. Stick a floppy in your pc and right click on it and format it as a windows bootable disk.
4. Once the disk is formated right click on nvflash.zip and extract it to the floppy
5. Also extract the bios from step 2 to the floppy aswell
6. Take your floppy disk and graphic card to a friends house where you know the 8800gt will work
7. Stick in your 8800gt and the reboot his computer with the floppy in the disk drive and make sure you selct floppy as first boot device in the bios
8. boot the pc and if you have followed the above steps you should see a command line like this
a:\
9. if you see that command line then type this
a:\nvflash -b originalbios.rom
that will back up your bios just follow on screen instructions
10. after back up you should arrive at this command line again
a:\
11.If you are then type the following
a:\nvflash -4 -5 -6 AS01Gen1.rom
that will then update your bios to the asus gen 1 version.
--------NVFLASH Util----------
With this utility it is possible to flash your NVIDIA graphics card with a new bios. Of course make sure you create a backup of your original bios!
NVFlash needs to be used in DOS mode, when you boot your system. Thus use a MS-DOS bootdisk and just copy this tool on it.
Make backups with the following command (in dos):
nvflash -b filename.bin
Flash your bios with:
nvflash -f filename.bin
har kommit till steg 9 och där tar det stopp. jag tog en diskett formaterade den till DOS diskett. extraktade filerna till disketten (ny mapp skapades) jag visste inte vart jag skulle lägga in bioset så jag la den i mappen och bland alla "dos filer"
när ja startar om datorn så kommer det upp
Microsoft(r) Windows Millennium blabla och ja ba WTF jag har ju xp vad är detta. jag kör på ändå och skriver nvflash -b originalbios.rom så kommler det fram Bad command or filename
vad ska jag göra? är det fel på disketten? eller på DOS som är gjort till Windows Millenium snälla hjälp mig , har haft grafikortet i 2 veckor snart och har fortfarande inte fått igång det