Du måste beskriva vad det är som inte fungerar, du ger inte så mkt info.
Lyser dioden på AP'n? Vilken färg?
Exakt vad gör du när du inte lyckas få kontakt med den?
Kolla lite här:
http://www.stevejenkins.com/blog/2015/09/how-to-install-a-ubi...
"After downloading and installing the software, run it. It will take a minute to initialize. It’s actually setting up a private web server on the local computer that you’ll access with your web browser. When it’s running, it will prompt you with a button to “Launch a Browser to Manage Wireless Network” to access the Controller.
Your UAP-PRO will be in a condition called “Awaiting Adoption,” meaning it hasn’t been “adopted” by (or added to) any network yet. If the UniFi Controller software “finds” the UAP-PRO right away and attempts to adopt it, great. Just follow the steps in the wizard to get up and running: along the way you’ll have to create a new admin user and password (this is only to configure the UAP, and not the same thing as the network name or password required for devices to join the WiFi network), and you’ll answer some questions like what network name you want to use, what password people will use to access the network, etc.
But if the UniFi Controller software doesn’t find the un-adopted UAP-PRO, don’t worry. It didn’t find mine right away, either. Just keep hitting “Next” or “Skip” to get into the main Dashboard area of UniFi Controller. Once in the Dashboard, click on the Devices icon in the left column. If you see a UniFi AP Pro in the list waiting for adoption, go ahead and hit the ADOPT button. If you don’t see anything, look near the bottom of the screen and click the Settings icon. Then click the Controller menu item on the left side, and make sure “Make controller discoverable on L2 Network” is checked. Hit APPLY then the X at the top of the screen to go back to the Dashboard. Now go back to the Devices icon and see if your UAP-PRO is there yet. If it’s not, check all your connections, make sure it’s powered, and temporarily turn off the Windows Firewall (you can find it in the control panel). That might make it easier to find.
If you still can’t find it, there’s not much else I can tell you that will help, besides verifying everything I’ve explained to this point. Eventually, it will show up in the Devices list, and you’ll be able to press the ADOPT button. It will take a while for it to join your network. Once it does, go back into the Settings icon (at the bottom of the Dashboard) and go through the following Menu items:
"