I have built the new HDPLEX 2nd Gen H5 with these components.
Gigabyte GA-z170-HD3P
EVGA Geforce gtx 960
Samsung 950 pro M.2,256gb
Intel 6700T
Memory 2x8 Gb and Windows 10.
External psu Corsair RM 650i
Asus Xonar Essence soundcard
Hd-Plex H5 2. Generation
- Skapat
- 2016-11-17
- Skapat av
- arne51
- Senast ändrat
- 2016-11-17
- Visningar
- 5 955
My build with Hd-Plex H5 2. Generation.
I enjoyed it very much. The case was very nice. No big problems really.
the package
great stuff
with plastic cover. well protected.
Lots of pieces.
The parts. Gigabyte z170-UD3H. i7 6700T. gtx 960 only 19cm long.
The Gigabyte z-170 HD3P I chose because it had what I needed and was only 19 cm wide. Always fine with extra space. But the socket is closer to the back side so I had to modify a little
So I fixed the back plate
More fixing. To get it real tight
Vertical to apply thermalpaste. I found it most easy to apply directly to the pipes
+ the Samsung m.2 ssd. 950 pro.
Testing with internal graphic. A total mess. I had mounted the back plate when I decided to test the graphic card before using the Riser cable. Recommended in the manual. And I had no problem with the Hd-Plex Riser cable!!!
And it will be a complete external Corsair RM 650 I with Cablemod sleeved cables. I was thinking of a Modular Bridge Board, but this works ok. Not going to move it around a lot.
And You can not see it when I use it.
The power and usb button board. Not much space.
I tried WD-disks both Red and Green, but they made to much sound in this case so I have a Samsung 500 GB ssd as an extra disc and will put in more of them later. Or use an externa disc , external blu-ray and NAS for stored music and movies.
Hinged faceplate.
The Blu-ray died so I removed it. Probably an external if I use one later.
Graphic card
some extra cooling.
Had to bend the pipes a little extra to fit, but no problem really.
The result.
+ Asus Xonar Essence STX !!
It boots about 20 seconds and according to HWInfo64 temperatures is no problem. I think.
Room temperature 21-22°C
CPU may rise to around 40°C
GPU up to about 40°C
M.2 almost 40°C.
There is something called Temperature 4. It usually starts around 80°C, but only rises 10-12°C. I suppose it is false starting temperatures ?
And PCH temperature starts at around 34°C and rise about 20°C. the chipset?. Can it really rise from start to a temperature around 34°C as fast as 30 seconds after booting ?
Ready to use.
Has been working without problems for some months now.
When You touch it it does not feel hot at all.
push the button and it gives a white flash. a slight rub and the blue light comes on.
Thanks for watching. Hope some of You enjoyed it.
Greetings from Sweden.Arne.