Dan Cases C4 Sfx V2 och Matx Q1 2026

Dan själv bekräftade att prototyperna är klara för dessa 2 chassin och att han beräknar att dom ska börja säljas Q1 2026.

Själv haft koll på sfx versionen och blir nu 13.85 L och 3.7 slots Gpu till 336 mm , 145 mm Cpu, itx moderkort

Matx 16.65 L, 4.5 slots Gpu, 155. Matx och itx moderkort.

C4 Matx

The C4-MATX will have 3 main builds. For all builds the GPU part will stay the same: Install the biggest GPU and if possible add intake fans on top

1)ITX - classic:
------------------------
focus: 2.5" drive support and maximum AIO support like Freezer III
CPU: 240/280 AIO or tower heatsink,
PSU: SFX, SFX-L next to motherboard,
board: ITX,
2.5 drive: up to 2x at front,
case fan: 140mm fan AIO bracket exhaust,

2)ITX - max Airflow:
------------------------
focus: best possible air cooling support
CPU: tower heatsink,
PSU: SFX, SFX-L exhaust facing front middle position,
board: ITX,
2.5 drive: 1x at bottom,
fan: 140mm at AIO bracket exhaust + 2x 120mm on mATX bracket exhaust.,

3)mATX - default:
------------------------
Focus: mATX
CPU: 240/280 AIO or tower heatsink - Note: 280 AIO on mATX will only work if you replace one 140 fan with a 120 one with the included bracket,
PSU: SFX, SFX-L at front exhaust facing bottom of the case,
board: mATX or ITX,
2.5 drive: 1x at bottom,
fan: 140mm fan AIO bracket exhaust,

I like to install many 2.5" drives: build 1,
i like to use matx: build 3,
i need max CPU cooling: build 1 with 280 Freezer III,
i need best possible air cooling: build 2