Award BIOS Beep codes
ANSWER
The Award BIOS basically only reports either memory or video problems in its beep codes. Worse, the codes themselves sometimes refer to one OR the other item being the problem, or else it's the motherboard at fault.
Beep code brief:
1 Long Beep: Memory problem
1 Long Beep and 2 Short Beeps: Video error
Continuous Beeping: Memory or video problem
Any other beep pattern: Most likely Memory problem
1 long Beep: Memory problem
Something is wrong with the memory installed. Check out the troubleshooting memory problems FAQ for details. Note that there could also be something wrong with just accessing the memory (ie the motherboard has a problem).
1 long beep, then 2 Short Beeps: Video error
The motherboard is not able to access the video card for some reason. Either the video card is not working, it's memory is not accessable, or it's BIOS may be corrupt. This error code could also mean something is wrong with the motherboard.
Continuous Beeping: Memory or video problem
This is a tricky situation... likely the problem is either memory or the video. This can also be found when the motherboard is faulty.
saxat från
http://www.neoseeker.com/Hardware/faqs/kb/12,12.html