Min vattenkylare låter illa

hej

min vattenkylning låter som ett akvarium, någon som vet om det går att fixa eller är det bara att köpa nytt?

Kylning: Antec Kuhler H2O 620

Hittade det här ska testa det ikväll.

1) Before installing keep heat sink unit lower then the radiator with the hoses facing upwards (on the top of the unit). Tap the heatsink and shake it several times, this will move trapped air into the radiator.
2) You must keep the radiator upright and higher then the heatsink the entire time with the hoses on the radiator at the bottom the entire time. This will cause air to rise to the top of the radiator.
3) Install the heatsink with the motherboard mounted and the case sitting upright. The hoses must stay on the top and keep radiator above the heatsink.
4) Move the radiator, carefully making sure never to change the orientation and keep the hoses on the bottom of the unit. Remember, the idea is to keep the trapped air in the top of the radiator. Then mount the radiator with the hoses on the bottom. Make sure to keep case in it's upright position.
5) Turn off any voltage controller for the pump. You want maximum voltage to the pump at all times. Lower voltages may cause the impeller to spin slower causing noise