Problem med dvd bränning
Jag kan inte bränna dvd i linux, den går till 100% och sen säger den att det blev fel. Skivan går inte att montera, den säger att det antingen är fel filsystem eller "bad superblock". CD skivor verkar däremot fungera fint (har iofs bara brännt en cd-r och en cd-rw för att testa). Dessutom så fungerar inte simuleringen, den bränner endå
Jag kör med X-CD-Roast och här kommer loggen den hostar upp när det går fel:
Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORDPRODVD dev= "0,0,0" gracetime=10 fs=4096k -v driveropts=burnfree,noforcespeed speed=40 -dao -dummy -eject -pad -waiti tsize=358508s -
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
Unlocked features: ProDVD Clone
Limited features:
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
TOC Type: 1 = CD-ROM
Waiting for data on stdin...
Using libscg version 'schily-0.7'
Driveropts: 'burnfree,noforcespeed'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PLEXTOR '
Identifikation : 'DVDR PX-708A '
Revision : '1.02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: DVD+R
Profile: DVD+R (current)
Profile: DVD+RW
Profile: DVD-RW sequential overwrite
Profile: DVD-RW restricted overwrite
Profile: DVD-R sequential recording
Profile: DVD-ROM
Profile: CD-RW
Profile: CD-R
Profile: CD-ROM
Using generic SCSI-3/mmc-3 DVD+R driver (mmc_dvdplusr).
Driver flags : DVD MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1036288 = 1012 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 700 MB padsize: 30 KB
Total size: 700 MB = 358523 sectors
Current Secsize: 2048
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 1936581
Starting to write CD/DVD at speed 8 in dummy SAO mode for single session.
Waiting for reader process to fill input buffer ... input buffer ready.
Starting new track at sector: 0
Track 01: writing 30 KB of pad data.
Track 01: Total bytes read/written: 734224384/734255104 (358523 sectors).
Writing time: 104.776s
Average write speed 5.1x.
Min drive buffer fill was 34%
Fixating...
Fixating time: 0.120s
cdrecord.prodvd: Input/output error. close track/session: scsi sendcmd: no error
CDB: 5B 01 01 00 00 FF 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 1000s
cdrecord.prodvd: Input/output error. close track/session: scsi sendcmd: no error
CDB: 5B 01 06 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 04 00 00
Sense Key: 0x5 Illegal RLinux sg driver version: 3.1.25
Sense Code: 0x72 Qual 0x04 (empty or partially written reserved track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 1000s
cdrecord.prodvd: fifo had 11565 puts and 11565 gets.
cdrecord.prodvd: fifo was 20 times empty and 2076 times full, min fill was 0%.
equest, Segment 0
Micael Ehn
ICQ: 2450221 Mail: micke(at-tecken)ehn.nu