Jo jag har läst den artikeln och svaren där varierar mellan tio olika svar. Finns det verkligen ingen som vet vad orsaken är till att just denna "install.wim"- fil är så jäkla svår för Windows att läsa/kopiera?
1. Byta brännarprogram
2. Uppgradera firmware i brännaren
3. Plocka ut och sätta in installationsskivan på nytt
4. Kolla minnen
5. Byta brännare till annat märke
6. "Klipp o klistra" WIM-filen isf att klickdra?
7. Sänka brännarhastigheten
8. Omskapa installationspartition
9. Balansera upp brännaren
10. Rengöra brännaren
Läste i någon annan diskussion att det var endast ett par filer som behövdes i den, snarare än de ca 1.3 Gb som den består av. Någon som vet vilka dessa filer i så fall är?
Om det varit problem generellt att läsa in filer från en bränd skiva oavsett OS eller brännarmärke skulle jag inte förvånas över att det finns olika sätt att komma runt problemet, men det gäller ju ENBART just denna fil och i Vista?!?
"After I burned the DVD at 1x using another program (and a firmware upgrade on the dvd drive) it has worked fine ever since."
"i just took the CD out at the error screen put it in another pc (again to check the file was there) and after reading that put it back into my notebook and reran the install and worked"
"Try upgrading your firmware on your DVD drive"
"Check memory"
"I changed the DVD drive with another one (same model and brand) and same error. I changed it over to a different brand and it worked"
"my solution was to let the setup run normally. Then, after it copied the files and tried to unpack them, it got the error message. I then used the recovery thing in the main install screen to open up the command screen (cmd).
I typed in setup.exe (while in the directory X:\sources) and the setup ran again. This time it worked."
"It seems that having a problem in the drive table was affecting the ability to copy the files to the c drive."
"INSTALL.WIM Do Not DRAG! Copy And Paste!
By Copying And Pasting! It Will Pick Up All Files!"
"i just reburned it at lowest speed using alcohol 120% and it worked"
"I restarted the installation and deleted that partition and created a new one. That time it worked all ok. "
"Changing the drive works. You can use dvdburn from the windows driver kit to ensure that it is not the drive burning software"
"Well, I leveled my DVD drive, and it worked perfectly"
"I removed my spankydank new dvd drive and reinstalled a dusty old slower DVD drive that I was linuxing with"
"Took the DVD out after the second time tonight, gave it a quick wipe, re-started the installation"