Inlägg

va? har ingen skärm ansluten till datorn..

lite trådkapning men är det möjligt att så om man loggar in via ssh startar pftp sen kan man logga ut från ssh och pftp körs fortfarande?

Nu är det så att jag är ute efter ett billigt serverchassi till min filserver, det ska ha bra kylningsmöjligheter och många hårddiskplatser (minst 10). Kvalitet och vikt spelar ingen större roll då det ska stå i en garderob.

Edit gärna plats för 2 nätagg, men inget krav. Det kan jag säkert modda till.

tackar

Kan bara välja mellan upplösningarna 640x400 & 640x480 @ 60 Hz i Kubuntu. Har enligt guide installerat ati linux drivrutinerna men fungerar ändå inte. Några tips? OBS är helt ny när det gäller linux.

verkar som RS-130 är gjorda för att lyssna på musik i, jag kommer endast använda dem till filmtittande...

Nu är det så att jag vill kunna se på film utan att störa andra och är därför ute efter ett par trådlösa hörlurar med bra ljud för under 1000kr.

såhär blir det... sen när jag kör sensors hittar den inga.. har testat ISA/smbus..
////
This program will help you determine which I2C/SMBus modules you need to
load to use lm_sensors most effectively. You need to have i2c and
lm_sensors installed before running this program.
Also, you need to be `root', or at least have access to the /dev/i2c-*
files, for most things.
If you have patched your kernel and have some drivers built in, you can
safely answer NO if asked to load some modules. In this case, things may
seem a bit confusing, but they will still work.

It is generally safe and recommended to accept the default answers to all
questions, unless you know what you're doing.

We can start with probing for (PCI) I2C or SMBus adapters.
You do not need any special privileges for this.
Do you want to probe now? (YES/no): yes
Probing for PCI bus adapters...
Use driver `rivatv' for device 01:00.0: GeForce2 MX
Use driver `i2c-i801' for device 00:1f.3: Intel 82801DB ICH4
Probe succesfully concluded.

We will now try to load each adapter module in turn.
Load `rivatv' (say NO if built into your kernel)? (YES/no): yes
FATAL: Module rivatv not found.
Loading failed... skipping.
** Note: rivatv module is available at http://rivatv.sourceforge.net/
Module `i2c-i801' already loaded.
If you have undetectable or unsupported adapters, you can have them
scanned by manually loading the modules before running this script.

To continue, we need module `i2c-dev' to be loaded.
If it is built-in into your kernel, you can safely skip this.
i2c-dev is already loaded.

We are now going to do the adapter probings. Some adapters may hang halfway
through; we can't really help that. Also, some chips will be double detected;
we choose the one with the highest confidence value in that case.
If you found that the adapter hung after probing a certain address, you can
specify that address to remain unprobed. That often
includes address 0x69 (clock chip).

Next adapter: SMBus I801 adapter at 0500
Do you want to scan it? (YES/no/selectively): yes
Client found at address 0x08
Client found at address 0x37
Client found at address 0x44
Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed!
Client found at address 0x50
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Probing for `DDC monitor'... Failed!
Probing for `Maxim MAX6900'... Failed!
Client found at address 0x51
Probing for `SPD EEPROM'... Success!
(confidence 8, driver `eeprom')
Client found at address 0x69

Some chips are also accessible through the ISA bus. ISA probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.

Do you want to scan the ISA bus? (YES/no): yes
Probing for `National Semiconductor LM78'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM78-J'
Trying address 0x0290... Failed!
Probing for `National Semiconductor LM79'
Trying address 0x0290... Failed!
Probing for `Winbond W83781D'
Trying address 0x0290... Failed!
Probing for `Winbond W83782D'
Trying address 0x0290... Failed!
Probing for `Winbond W83627HF'
Trying address 0x0290... Success!
(confidence 8, driver `w83781d')
Probing for `Winbond W83627EHF'
Trying address 0x0290... Failed!
Probing for `Winbond W83697HF'
Trying address 0x0290... Failed!
Probing for `Silicon Integrated Systems SIS5595'
Trying general detect... Failed!
Probing for `VIA Technologies VT82C686 Integrated Sensors'
Trying general detect... Failed!
Probing for `VIA Technologies VT8231 Integrated Sensors'
Trying general detect... Failed!
Probing for `ITE IT8712F'
Trying address 0x0290... Failed!
Probing for `ITE IT8705F / SiS 950'
Trying address 0x0290... Failed!
Probing for `IPMI BMC KCS'
Trying address 0x0ca0... Failed!
Probing for `IPMI BMC SMIC'
Trying address 0x0ca8... Failed!

Some Super I/O chips may also contain sensors. Super I/O probes are
typically a bit more dangerous, as we have to write to I/O ports to do
this. This is usually safe though.

Do you want to scan for Super I/O sensors? (YES/no): yes
Probing for `ITE 8702F Super IO Sensors'
Failed! (0x5217)
Probing for `ITE 8705F Super IO Sensors'
Failed! (0x5217)
Probing for `ITE 8712F Super IO Sensors'
Failed! (0x5217)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87360 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87363 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87364 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87365 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87365 Super IO Voltage Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87365 Super IO Thermal Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87366 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87366 Super IO Voltage Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87366 Super IO Thermal Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87372 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87373 Super IO Fan Sensors'
Failed! (0x52)
Probing for `Nat. Semi. PC87591 Super IO'
Failed! (0x52)
Probing for `Nat. Semi. PC87371 Super IO'
Failed! (0x52)
Probing for `Nat. Semi. PC97371 Super IO'
Failed! (0x52)
Probing for `Nat. Semi. PC8739x Super IO'
Failed! (0x52)
Probing for `Nat. Semi. PC8741x Super IO'
Failed! (0x52)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (0x52)
Probing for `SMSC 47M10x/13x Super IO Fan Sensors'
Failed! (0x52)
Probing for `SMSC 47M14x Super IO Fan Sensors'
Failed! (0x52)
Probing for `SMSC 47M15x/192 Super IO Fan Sensors'
Failed! (0x52)
Probing for `SMSC 47S42x Super IO Fan Sensors'
Failed! (0x52)
Probing for `SMSC 47S45x Super IO Fan Sensors'
Failed! (0x52)
Probing for `SMSC 47M172 Super IO'
Failed! (0x52)
Probing for `SMSC LPC47B397-NC Super IO'
Failed! (0x52)
Probing for `VT1211 Super IO Sensors'
Failed! (0x52)
Probing for `Winbond W83627HF Super IO Sensors'
Success... found at address 0x0290
Probing for `Winbond W83627THF Super IO Sensors'
Failed! (0x52)
Probing for `Winbond W83637HF Super IO Sensors'
Failed! (0x52)
Probing for `Winbond W83697HF Super IO Sensors'
Failed! (0x52)
Probing for `Winbond W83697SF/UF Super IO PWM'
Failed! (0x52)
Probing for `Winbond W83L517D Super IO'
Failed! (0x52)
Probing for `Winbond W83627EHF Super IO Sensors'
Failed! (0x5217)

Do you want to scan for secondary Super I/O sensors? (YES/no): yes
Probing for `ITE 8702F Super IO Sensors'
Failed! (skipping family)
Probing for `Nat. Semi. PC87351 Super IO Fan Sensors'
Failed! (skipping family)
Probing for `SMSC 47B27x Super IO Fan Sensors'
Failed! (skipping family)
Probing for `VT1211 Super IO Sensors'
Failed! (skipping family)
Probing for `Winbond W83627EHF Super IO Sensors'
Failed! (skipping family)

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `eeprom' (should be inserted):
Detects correctly:
* Bus `SMBus I801 adapter at 0500'
Busdriver `i2c-i801', I2C address 0x50
Chip `SPD EEPROM' (confidence: 8)
* Bus `SMBus I801 adapter at 0500'
Busdriver `i2c-i801', I2C address 0x51
Chip `SPD EEPROM' (confidence: 8)

Driver `w83781d' (may not be inserted):
Misdetects:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `Winbond W83627HF' (confidence: 8)

Driver `w83627hf' (should be inserted):
Detects correctly:
* ISA bus address 0x0290 (Busdriver `i2c-isa')
Chip `Winbond W83627HF Super IO Sensors' (confidence: 9)

I will now generate the commands needed to load the I2C modules.
Sometimes, a chip is available both through the ISA bus and an I2C bus.
ISA bus access is faster, but you need to load an additional driver module
for it. If you have the choice, do you want to use the ISA bus or the
I2C/SMBus (ISA/smbus)?
///

Finns det nåt program som fungerar med debian och kan visa CPU temp, fläkt hastighet och nätverksanvändning i texmode via ssh?

asså jag har 1 lina men 2 ip nummer. Ena ip nummret vill jag ska tilldelas endast servern medan det andra delas på de resterande datorerna i huset.

Jo men det blir problem med 2 ipn i samma kabel och att tilldela servern ett speciellt ip.

fast.

Har så nu... men då måste all trafik gå igenom routerns wan port och det medför låg överföringshastighet...:(

alldeles för dyr:S

:/ Något rekommenderat router program som är mycket enkelt att ställa in?

Nu är det så att jag är ute efter en inte allt för dyr router som stödjer 1gbit lan samt stöd för wan ips. D.v.s jag vill kunna koppla in en nätverkskabel i wanporten sen tilldela mitt ena ip till min server sen dela det andra på de resterande datorerna i nätverket. Finns det någon router som uppfyller mina krav?

Annars går det bra med en router som klarar 1gbit i wan porten:)

Nu är det så att jag är ute efter en bra router programvara att installera på min redan fungerande debian filserver. Den måste klara att köra 2 ip nummer i en nätverkskabel sen dela upp dem så att ena ip:t tilldelas servern och andra ip delas på de resterande av datorerna i nätverket. Det ska inte krävas nyinstallation och inte vara allt för krångligt, några tips?

men jag läste att jag bara får ut 750gb av en 1000gb mjukvaro raid5 är det sant?

Måste man ha ett raidstödjande kontroller kort för software raid5?

Har testat med ett annat nätagg, samma fel:(

Kondensatorerna ser fina ut...

alla fläktar går för fullt.