Forum Datorkomponenter Modifikationer och egna konstruktioner Gallerikommentarer Tråd

Rey - A Star Wars Project

1
Skriv svar
Permalänk
Proffsmoddare
●

Rey - A Star Wars Project

Hello enthusiasts!

I would like to present a project that I have created with Corsair. This project has been made with the idea to put the protagonist of the last three films, Rey, as the main focus for this build.

There have been a million computers built in the past with the theme of Star Wars. This is not so strange considering the massive scope of the franchise.

My mod features custom panels which are covered in the same material as the clothing that Rey wears on screen. The chassis has a custom paint job in a light grey paint, and matte clear coat. The GPU waterblock and backplate has been stripped of the black anodizing, with some parts being brushed and gloss clear coated. A leather belt was made for the front panel with it being held in place with pop-rivets. The buckle is made from aluminium. The buckle has been bent 180° on 2 ends which wraps around the belt, and holds it in place. The top panel has been cut away to allow more airflow, and also show the fans off. I used chromed copper for the water cooling piping as it lends to the sci-fi nature that the SW world is set in.

Specifications for this project are as follows:
Intel Core i5 9700k
ASUS Strix RTX 2070 Super
ASUS Z390-F Strix
Corsair 510 N.2 SSD 256GB
Corsair 500D
Corsair HX850i
Corsair LL120 x6
Corsair watercooling

Thank you to Corsair for the opportunity to work on this awesome project!

Besök galleriet här

Visa signatur

https://facebook.com/metallicacidcustomspcs
https://youtube.com/metallicacidcustoms
https://instagram.com/metallicacidcustoms

Redigera
Citera flera Citera
Permalänk
Medlem ★
●

@MetallicAcid: Fint

Visa signatur

CPU: I9 10900KF -Kylare: Arctic Freezer 360 - Moderkort: ASRock Velozita Z590 PG.
GPU: RX 9070 XT Reaper @2 st 120mm cf-v12hp hydro dynamic fläktar. 👍
RAM: 32GB DDR4 3466 MHz Ballistix Elite. HÅRDDISK: 4 st SSD, 2 Mekaniska.
MONITOR:1 Samsung Odyssey Neo G8 4K 240Hz. MONITOR:2 Optix MAG274R 27" 1080p 144Hz MONITOR/Tv:3 LG 47lv355n-ZB 47". Nätagg: Asus TUF 1000w Gold Atx 3.1. Allt i ett Cooler Master CM Storm Stryker.

Redigera
Citera flera Citera
Permalänk
Medlem ★
●

Amazing work as always! 5/5

Will Corsair showcase it anywhere?

//Tobias

Visa signatur

| Fractal Design North TG | Corsair HX1000i Platinum | Rog Strix Maximus Hero XIII | Intel i9 11900k @ stock | Deepcool LT520 240mm | Team group DDR4 32GB 4000MHz CL18 | Rog Strix RTX 3080 TI | Asus PG348Q @ 100hz |

Redigera
Citera flera Citera
Permalänk
Medlem ★
●

This build has more character than the character it "portraits", 4/5!

Visa signatur

www.obscured.se mrtg.obscured.se - erik.hennerfors@obscured.se - See ya in cyberspace

[img]https://www.speedtest.net/result/17472783755.png[/img]

Redigera
Citera flera Citera
Permalänk
Medlem ★
●

Awesome build! Impressive work with every detail, from piping, cablemanagement to the finish with the paintjob and belt. You've really got an eye for the details! Great job!

Visa signatur

Intel i9 10900k @5,2Ghz, MSI Z590 Gaming EK-X, G-Skill Elite Royal 4x8gb @3600mhz cl16, Asus TUF 3080ti OC, PNY 1TB m2, Samsung 960 EVO 500Gb, Seasonic Prime 1300W Platinum, EK D5 Revo, 2x360mm EK SE, Philips Envia 49" OLED 144hz,
Galleri Ancalagon The Black

Redigera
Citera flera Citera
Permalänk
Medlem
●

Riktigt snyggt bygge!

Visa signatur

|OS: Windows 10 64bit|MB: Asus ROG Maximus X Hero |CPU: Intel Core i7-8700K|GPU: ROG Strix RTX 2080Ti White Edition|RAM: Corsair Dominator Platinum SE Torque 32GB (4x8GB)3200MHzDDR4|SSD:Samsung M.2 970 EVO Plus 500GB Samsung SSD 750 500GB Samsung M.2 960 250GB |Chassi:Fractal Design Define R6 Vit TG|PSU: Corsair RM850x|CPU-Kylare:Asus Ryujin 240mm|Monitor:Asus ROG Swift PG279Q

Redigera
Citera flera Citera
Permalänk
Proffsmoddare
●
Skrivet av SCORPIUS:

@MetallicAcid: Fint

Gå till inlägget

Thank you!

Skrivet av =):

Amazing work as always! 5/5

Will Corsair showcase it anywhere?

//Tobias

Gå till inlägget

Thank you man!!

Skrivet av Deriveh:

Awesome build! Impressive work with every detail, from piping, cablemanagement to the finish with the paintjob and belt. You've really got an eye for the details! Great job!

Gå till inlägget

Awesome to hear that you liked it! Thank you. I am very pleased with the paint on this one.

Skrivet av macce601:

Riktigt snyggt bygge!

Gå till inlägget

Thank you Macce

Visa signatur

https://facebook.com/metallicacidcustomspcs
https://youtube.com/metallicacidcustoms
https://instagram.com/metallicacidcustoms

Redigera
Citera flera Citera
Permalänk
Medlem ★
●

I didn't get the name of the PC case. Otherwise great, as usual.

Visa signatur

My Rig https://classic.prisjakt.nu/list.php?ftg_check=on&exclude_ftg...
Fel av mig! Men sjutton vad snabba ni är på att kommentera vad andra gör och inte gör rätt och fel... :/

Redigera
Citera flera Citera
Permalänk
Medlem ★
●
Skrivet av MetallicAcid:

Hello enthusiasts!

I would like to present a project that I have created with Corsair. This project has been made with the idea to put the protagonist of the last three films, Rey, as the main focus for this build.

There have been a million computers built in the past with the theme of Star Wars. This is not so strange considering the massive scope of the franchise.

My mod features custom panels which are covered in the same material as the clothing that Rey wears on screen. The chassis has a custom paint job in a light grey paint, and matte clear coat. The GPU waterblock and backplate has been stripped of the black anodizing, with some parts being brushed and gloss clear coated. A leather belt was made for the front panel with it being held in place with pop-rivets. The buckle is made from aluminium. The buckle has been bent 180° on 2 ends which wraps around the belt, and holds it in place. The top panel has been cut away to allow more airflow, and also show the fans off. I used chromed copper for the water cooling piping as it lends to the sci-fi nature that the SW world is set in.

Specifications for this project are as follows:
Intel Core i5 9700k
ASUS Strix RTX 2070 Super
ASUS Z390-F Strix
Corsair 510 N.2 SSD 256GB
Corsair 500D
Corsair HX850i
Corsair LL120 x6
Corsair watercooling

Thank you to Corsair for the opportunity to work on this awesome project!

Besök galleriet här

Gå till inlägget

I always vote a 5/5 on your Projects. This one i no exception.
Maybe in the future - a breaking bad-theme?

Visa signatur

🧠i9-10900k @ 3,7GHz 📹3080Ti STRIX OC 12GB 📼Corsair Vengeance 64GB
📰MSI MEG z490 Unify 💽Samsung 970 EVO plus 500GB/1TB 📺Asus PG348Q 34"

Redigera
Citera flera Citera
Permalänk
Proffsmoddare
●
Skrivet av darrenj:

I didn't get the name of the PC case. Otherwise great, as usual.

Gå till inlägget

Thanks mate! The PC is made to resemble the character Rey from the latest Star Wars film.

Skrivet av griid:

I always vote a 5/5 on your Projects. This one i no exception.
Maybe in the future - a breaking bad-theme?

Gå till inlägget

Thanks! The next themed build will be Cyberpunk 2077, and also a PC built like Bugatti Veyron!

Visa signatur

https://facebook.com/metallicacidcustomspcs
https://youtube.com/metallicacidcustoms
https://instagram.com/metallicacidcustoms

Redigera
Citera flera Citera
Permalänk
Medlem ★
●

@MetallicAcid: I dont often say this as i find most builds lack creativity and style but this build really hit the spot for me! Extremely nice on almost all levels (am not a fan of the cloth ontop of the case, otherwise a+!) and a great attention to detail lifts this case to a top ten for me! Awesome work!

Visa signatur

Futureproofing explained
Temp "sensorers" riktiga utseende!
^Är även anledningen till att inte alla program visar samma temperatur på samma hårdvara.
Ryzen 7800x3D | TUF GAMING B650-PLUS | Asus 4070 || 8700k | Aorus gaming k3 | XFX core 650 Bronze | 1070ti | Fractal Design XL R2 |

Redigera
Citera flera Citera
Permalänk
Proffsmoddare
●
Skrivet av Pan.Pan:

@MetallicAcid: I dont often say this as i find most builds lack creativity and style but this build really hit the spot for me! Extremely nice on almost all levels (am not a fan of the cloth ontop of the case, otherwise a+!) and a great attention to detail lifts this case to a top ten for me! Awesome work!

Gå till inlägget

Thank you so much for the kind words! Hopefully I will have the opportunity to do more themed builds with Corsair in the near future!

Visa signatur

https://facebook.com/metallicacidcustomspcs
https://youtube.com/metallicacidcustoms
https://instagram.com/metallicacidcustoms

Redigera
Citera flera Citera
1
Skriv svar