För er som vill använda EU Firmware - som det sig bör i en Europamaskin: ftp://ftp.dlink.se/Products/dir-products/dir-655/drivers_firm...
Den senaste där är för närvarande: DIR655Ax_FW131EUB02Beta01
Har provat den senaste DIR655Ax_FW131EUB02Beta01, men kunde inte få det trådlösa att fungera, har en DIR-655 A4.
Enligt vad som står i txt-filen för den tyska DIR-655_fw_reva_131EUb02_ALL_multi_20100114_fixHNAP: ftp://ftp.dlink.de/dir/dir-655/driver_software/ ska den fungera för A2, A3 & A4.
Själva firmware-bin-filen är exakt densamma som den från ftp.dlink.se.
Kom på felet med att det rådlösa inte fungerade, det är när man slår på WPA eller WPA2 som det lägger av, kör N-Bandet.
Detta löste sig med att uppdatera: Pre-Shared Key'n (något jag inte behövt göra vid tidigare uppdateringar, i blad är man inte riktigt med i svängarna).
Men det är ju en Beta - dem kanske man skall akta sig för.
OBS! Uppdatera firmware genom LAN-anslutning, inte via trådlöst.
Helst via Internet Explorer.
DIR-655A4 release notes history.
====================================================
ver1.31EUb02 Beta, 2010/01/14, EricK
1. Ubicom SDK 7.6.1 build 158, 2010, Jan 11, UBICOM_7_6_1_B0158
2. Checksum: 0x0435D18F
3. arp cache time: 60 seconds
4. HNAP security bug, could send set command in with "GetDeviceSettings" SoapAction.
ver1.31EUb01 Beta, 2009/12/23, EricK
1. Ubicom SDK 7.6.1 build 156, 2009, Dec 22, UBICOM_7_6_1_B0156
2. Checksum: 0x0435D0C7
3. arp cache time: 610 seconds
4. update Advanced DNS string (multi-languages)
5. patch DNS relay
6. update sharePort (Kcode) to 0.99
ver1.30EUb09 Beta, 2009/12/10, EricK
1. Ubicom SDK 7.6.1 build 153, 2009, Dec 09, UBICOM_7_6_1_B0153
2. Checksum: 0x04356B6C
3. usb 3g card always connet to ISP, should follow behaviors of always/on demand/manual
ver1.30EUb09, 2009/10/01, EricK
1. Ubicom SDK 7.6.1 build 142, 2009, Sep 30, UBICOM_7_6_1_B0142
2. Checksum: 0x04356413
3. GUI, DE version, Access control page, schedule do not work with 2nd entries
V 1.30EU, build 08, 2009/07/09, by Jerry
1. Ubicom SDK 7.6.1 build 124, 2009, JULY 07 UBICOM_7_6_1_B0124
2. Checksum: 0x043514BF
3. 3G country and ISP list update.
4. Fix Time Zone-Newfoundland error in i18n,if set Newfoundland time zone,it should be GMT -03:30.
5. Fix WEBUI "Firmware" page error.
Step 1 : Enable Remote Management in ADMIN page, and save settings
Step 2 : Then click "reboot later" button
Step 3 : Enable/Disable "Firmware Upgrade Notification Options" functoins, and save settings.
Step 4 : Then click "reboot later" button
result: Can't reboot later, and appear "Error on page" message.
V 1.30EU, build 07, 2009/07/08, by Jerry
1. Ubicom SDK 7.6.1 build 124, 2009, JULY 07 UBICOM_7_6_1_B0124
2. Checksum: 0x0435BF04
3. Fix when disable DHCP server and enable DHCP server, LAN PC can not get IP.
4. Fix Time Zone issue,Newfoundland time zone should be GMT -03:30.Translate string don't modify time synchronous.
5. Fix WEBUI "Firmware" page error.
Step 1 : Enable Remote Management in ADMIN page, and save settings
Step 2 : Then click "reboot later" button
Step 3 : Enable/Disable "Firmware Upgrade Notification Options" functoins, and save settings.
Step 4 : Then click "reboot later" button
result: Can't reboot later, and appear "Error on page" message.
V 1.30EU, build 06, 2009/07/03, by Jerry
1. Ubicom SDK 7.6.1 build 0123, 2009, Jul 01 UBICOM_7_6_1_B0123
2. Checksum: 0x0435BF04
3. Fixed Using wireless client to configure Access Control rules,cause DUT reboot.
4. Fixed upnp bug. The upnp port will be closed for a short time.
5. Fixed QRS issue, can't set up wireless setting.
6. Fixed Router DHCP IP range would be set 192.168.0.1 to 192.168.0.254 after running QRS.
7. Fixed WINS Server field can not be cleared by "Del" or "Back Space" key in UI Basic/Network.
8. Fixed DWM-152 don't connect ,if using DWM-152 tool quick connection
9 Fixed When set 3G mode,QoS GUI need to disable.
10.Fixed 3G log have garbage characters.
11.Fixed Loss WAN type 3G USB Adapter string in WAN description.
12.Fixed WPS UI Show Error warning message.
Step 1 : Restore factory default
Step 2 : Disable WPS
Step 3 : Enable Guest Zone
Step 4 : Enable Security mode , seting WEP Shared Key
Step 5 : Enable WPS
Step 6 : Disable Security Mode (Security mode : None)
it will show Error warning message.
13.Fixed Loss language box.
Step 1 : Restore factory default
Step 2 : Log in DUT WEB page
Step 3 : Close WEB page
Step 4 : OPEN DUT Log in WEB page
Step 5 : Loss Language box
V 1.30EU, build 05, 2009/07/03, by Jerry
1. Ubicom SDK 7.6.1 build 0123, 2009, Jul 01 UBICOM_7_6_1_B0123
2. Checksum: 0x0435BF04
3. Fixed Using wireless client to configure Access Control rules,cause DUT reboot.
4. Fixed upnp bug. The upnp port will be closed for a short time.
5. Fixed QRS issue, can't set up wireless setting.
6. Fixed Router DHCP IP range would be set 192.168.0.1 to 192.168.0.254 after running QRS.
7. Fixed WINS Server field can not be cleared by "Del" or "Back Space" key in UI Basic/Network.
8. Fixed DWM-152 don't connect ,if using DWM-152 tool quick connection
9 Fixed When set 3G mode,QoS GUI need to disable.
10.Fixed 3G log have garbage characters.
11.Fixed Loss WAN type 3G USB Adapter string in WAN description.
12.Fixed WPS UI Show Error warning message.
Step 1 : Restore factory default
Step 2 : Disable WPS
Step 3 : Enable Guest Zone
Step 4 : Enable Security mode , seting WEP Shared Key
Step 5 : Enable WPS
Step 6 : Disable Security Mode (Security mode : None)
it will show Error warning message.
13.Fixed Loss language box.
Step 1 : Restore factory default
Step 2 : Log in DUT WEB page
Step 3 : Close WEB page
Step 4 : OPEN DUT Log in WEB page
Step 5 : Loss Language box
V 1.30EU, build 04, 2009/06/04, by Jerry
1. Ubicom SDK 7.6.1 build 120, 2009, May 26 UBICOM_7_6_1_B0120
2. Checksum: 0x0435C9B2
3. Disable CPATCHA
V 1.30EU, build 03, 2009/06/04, by Jerry
1. Ubicom SDK 7.6.1 build 120, 2009, May 26 UBICOM_7_6_1_B0120
2. Checksum:0x0434F4F4
3. Disable CPATCHA
V 1.30EU, build 02, 2009/05/27, by Jerry
1. Ubicom SDK 7.6.1 build 120, 2009, May 26 UBICOM_7_6_1_B0120
2. Checksum: 0x04353AF2
3. Fix DWM-152/156 fail.
V 1.30EU, build 01, 2009/05/26, by Jerry
1. Ubicom SDK 7.6.1 build 120, 2009, May 26 UBICOM_7_6_1_B0120
2. Checksum: 0x0436AC77
3. Add Graphical authentication.
4. Add Advanced DNS.
5. Guest Zone disable SharePort support (USB spec v1.05)
6. XML Agent 1.08
7. Support DWM-152/156.
8. Fix potential security leak with CAPTCHA.
9. Update chklst.txt(add HW Ver and Channel list follow Chklst.txt Format for MP)
10. Fix When DCC set dns = 0.0.0.0,router don't force setting dns ip.
11. Add primary and secondary DNS server GUI in 3G setting When Enable Advanced DNS server.
12. Update kcodes lib to support USB utility v0.97 for apple/mac.
V 1.22EU, build 01, 2008/12/18, by Jerry
1. Ubicom SDK 7.6.1 build 80, 2008, Dec 11 UBICOM_7_6_1_B0080
2. Checksum:0x0436D8E0
3. Fix 3G virtual server, set in port 80 and using chunghua telecom 114.x.x.x,connection fail
4. 3G MTU modify form 1400 to 1492
V 1.21EU, build 06, 2008/12/10, by Vic
1. Ubicom SDK 7.6.1 build 79, 2008, Dec 09 UBICOM_7_6_1_B0079
2. Checksum:0x0436C5FD
3. Fix configure routing table in WAN (Physical) port later , plug and configure 3G adapter will cause DUT reboot
4. Fix WCN ok and then remove USB , router reboot issue
5. Fix restore default can not reset router system time
6. When configure 3G adapter ,advanced/routing page don¡¦t configure again
7. Fix Press Disconnect buttion in status page,the DNS is not released
V 1.21EU, build 05, 2008/11/03, by Jerry
1. Ubicom SDK 7.6.1 build 71B, 2008, Oct 28 UBICOM_7_6_1_B0071B
2. Checksum:0x0436FDEB
3. Fix the filesile smaller.
V 1.21EU, build 04, 2008/10/30, by Matt
1. Ubicom SDK 7.6.1 build 71B, 2008, Oct 28 UBICOM_7_6_1_B0071B
2. Checksum:0x043716E6
3. Fix choose language to German in GuestZone page one sentence is still not translated : ¡§Enable Routing between
Zones¡¨
4. The possibility two enter a Broadcast IP address under Virtual Server Settings
V 1.21EU, build 03, 2008/10/09, by Jerry
1. Ubicom SDK 7.6.1 build 64, 2008, Oct 08 UBICOM_7_6_1_B0064
2. Checksum:0x043578CE
3. Fix when delete schedule rules,guest wireless setting schedule don't back default value "always".
V 1.21EU, build 02, 2008/10/08, by Jerry
1. Ubicom SDK 7.6.1 build 64, 2008, Oct 08 UBICOM_7_6_1_B0064
2. Checksum: 0x0435D703
3. Fix D-TRACK bug: The main wireless and guest zone can be set different schedule time. But the schedule of Guest
Zone must be within the schedule of main WLAN. The rule will be checked on these pages \Setup\Wireless,
\Advanced\GuestZone, \Tools\Schedules.
4. Remove Enhanced ICMP Proxy GUI (\Advance\ network)
5. Fix an error on Wireless Setting page.
V 1.21EU, build 01, 2008/10/06, by Jerry
1. Ubicom SDK 7.6.1 build 63, 2008, Oct 01 UBICOM_7_6_1_B0063
2. Checksum: 0x043770AC
3. PPPOE PPTP L2TP password default is ""
4. Fix when delete schedule rules ,wireless setting schedule don¡¦t back default value ¡§always¡¨
5. Supply kcodes USB utility v0.94
6. Fix grammar bug by changing to "Please set the Network USB Detection interval time, ..."
7. Add 3G function
8. Add "Canada" and "USA" For 3G USB Adapter Country
9. Add test throughput LAN to WLAN and WLAN to LAN
V 1.20EU, build 03, 2008/09/04, by Vic
1. Ubicom SDK 7.6.1 build 51, 2008, Sep 04 UBICOM_7_6_1_B0051
2. Checksum: 0x0436D5A7
3. Fix Virtual server : not block broadcast address. ex: 192.168.0.255
4. Fix firmware query e-mail notification Issue.
5. Make HT40 more easy in outside environment.
6. Fix when Received Deauthentication, it will show MAC address 000000000000.
7. Fix zipb issue
V 1.20EU, build 02, 2008/08/15, by Vic
1. Ubicom SDK 7.6.1 build 41, 2008, Aug 13 UBICOM_7_6_1_B0041
2. Checksum: 0x0436dbc2
3. Fixed wireless wizard:have 5GHZ string
V 1.20EU, build 01, 2008/08/12, by Vic
1. Ubicom SDK 7.6.1 build 39, 2008, Aug 11 UBICOM_7_6_1_B0039
2. Checksum: 0x0436ee08
3. First version release.
