Min p166 säger så här (sitter på mobot)
wd0 at pciide0 channel 0 drive 0: <Maxtor 84320D4>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 4120 MB, 8930 cyl, 15 head, 63 sec, 512 bytes/sect x 8439184 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
P200 (mobo):
wd0 at pciide0 channel 0 drive 0: <Maxtor 88400D8>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 8011 MB, 16278 cyl, 16 head, 63 sec, 512 bytes/sect x 16408224 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
På Promise Ultra kkort
wd1 at pciide1 channel 0 drive 0: <WDC WD1200JB-00CRA1>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 111 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd2 at pciide1 channel 0 drive 1: <WDC WD1200JB-00CRA1>
wd2: drive supports 16-sector PIO transfers, LBA addressing
wd2: 111 GB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
wd2(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide1: secondary channel configured to native-PCI mode
wd3 at pciide1 channel 1 drive 0: <IBM-DTLA-307045>
wd3: drive supports 16-sector PIO transfers, LBA addressing
wd3: 43979 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 90069840 sectors
wd3: 32-bit data port
wd3: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd3(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
Hur det funkar vet jag dock inte...
Bara att det funkar.
Har runt 4.5-5mb/sek överföring via ftp, och runt 4mb/sek via samba.
100mbit switchat nät.
