Forum Övrigt Arkiverade forum Corsair Tråd Inlägg

Maximum DDR3 recommended VDIMM for 1.65 sticks?

1
Skriv svar
Permalänk
Medlem ★
●

Maximum DDR3 recommended VDIMM for 1.65 sticks?

Well, as the topic says
I have found this:
Dominator Qualification and Testing DDR3 - The Corsair Support Forums
But are for older memories.
So what do you recommend as maximum voltage for your 1.65v line of memories?
Still 2.0v?

My sticks are:
CMD4GX3M2B1600C8 with a CMXAF2 fan over it on the system you see in my signature.
Ver: 3.1 - Micron

Senast redigerat
Visa signatur

Burken : | PhII x6 1055T @ 4.2GHz | Corsair H50 PnP Scythe SL12SH | Asus Crosshair IV F | 4GB Dominator 1600 CL8 | Corsair HX520W | CM HAF932 | Dell 2405FPW | Creative 5.1 THX |

Redigera
Citera flera Citera
Permalänk
Corsair
●

The recommended DRAM voltage is what we set in the XMP profile (for Intel CPUs) which is still 1.65V. It's slightly different for your AMD / Phenom II CPU as the memory controller setup is different to Lynnfield/Bloomfield etc, though we still can't 'officially' recommend higher voltages. You have to do this at your own discretion.

Visa signatur

Corsair Support Forum

Redigera
Citera flera Citera
1
Skriv svar